Abstract:Multi Jet Fusion (MJF) is a recently developed polymeric powder bed fusion (PBF) additive manufacturing technique that has received considerable attention in the industrial and scientific community due to its ability to fabricate functional and complex polymeric parts efficiently. In this work, a systematic characterization of the physicochemical properties of MJF-certified polyamide 11 (PA11) and thermoplastic polyurethane (TPU) powder was conducted. The mechanical performance and print quality of the specimens printed using both powders were then evaluated. Both PA11 and TPU powders showed irregular morphology with sharp features and had broad particle size distribution, but such features did not impair their printability significantly. According to the DSC scans, the PA11 specimen exhibited two endothermic peaks, while the TPU specimen exhibited a broad endothermic peak (116–150 °C). The PA11 specimens possessed the highest tensile strength in the Z orientation, as opposed to the TPU specimens which possessed the lowest tensile strength along the same orientation. The flexural properties of the PA11 and TPU specimens displayed a similar anisotropy where the flexural strength was highest in the Z orientation and lowest in the X orientation. The porosity values of both the PA11 and the TPU specimens were observed to be the lowest in the Z orientation and highest in the X orientation, which was the opposite of the trend observed for the flexural strength of the specimens. The PA11 specimen possessed a low coefficient of friction (COF) of 0.13 and wear rate of 8.68 × 10−5 mm3/Nm as compared to the TPU specimen, which had a COF of 0.55 and wear rate of 0.012 mm3/Nm. The PA11 specimens generally had lower roughness values on their surfaces (Ra 40 μm). This investigation aims to uncover and explain phenomena that are unique to the MJF process of PA11 and TPU while also serving as a benchmark against similar polymeric parts printed using other PBF processes.

A comparative evaluation of compression moulded and fused deposition modelling 3D printed thermoplastic polyurethane

Investigation of the wear and friction profile of TPU-based polymers at different infill ratios

Comparative investigation on the mechanical behavior of injection molded and 3D-printed thermoplastic polyurethane

Tensile properties of 3D printed structures of polylactide with thermoplastic polyurethane

Mechanical dependence of 3D-printed thermoplastic polyurethane reinforced with minor continuous carbon fibres

A Comprehensive Investigation on 3D Printing of Polyamide 11 and Thermoplastic Polyurethane via Multi Jet Fusion

3D printing of PLA-TPU with different component ratios: fracture toughness, mechanical properties, and morphology

Optimizing 3D Printing Process Parameters for the Tensile Strength of Thermoplastic Polyurethane Plastic

Thermoplastic polyurethane for three‐dimensional printing applications: A review

Interfacial Bonding During Multi-Material Fused Deposition Modeling (FDM) Process Due to Inter-Molecular Diffusion

Effects of TPU on the mechanical properties, fracture toughness, morphology, and thermal analysis of 3D‐printed ABS‐TPU blends by FDM

Evolution of microstructure and thermo‐mechanical attributes of fiber reinforced polyamide during fused deposition modeling 3D printing: A comprehensive characterization study

Deformation Process of 3D Printed Structures Made from Flexible Material with Different Values of Relative Density

Effect of Process Parameters on the Hardness of 3D-printed Thermoplastic Polyurethane that Includes Foaming Agent

Infill pattern and density effects on the tensile properties of 3D printed PLA material

Effects of Printing Temperature and Filling Percentage on the Mechanical Behavior of Fused Deposition Molding Technology Components for 3D Printing

Comprehensive characterization of 3D-printed TPU/carbon black composites: Morphological, thermal, and mechanical properties

Compressive behaviour of 3D printed thermoplastic polyurethane honeycombs with graded densities

Effects of printing parameters on the mechanical characteristics and mathematical modeling of FDM-printed PETG

An experimental analysis of mechanical properties for a dissimilar pattern structure in the 3-D printing of a PLA5F filament using the Taguchi method