Abstract:The work considers the actual problem of creating effective dry construction mixes (DBC) for a wide range of construction works, in particular for external and internal plaster coatings. The main attention is paid to the study of the effect of finely dispersed mineral additives, such as diatomite, white carbon black (amorphous microsilica) and limestone powder, on the physical and mechanical properties of SBS. In the study, two working compositions of SBS based on cement binder with different types of sand were used: quartz, polymict, and screening of crushed limestone. The results of experimental studies showed that the introduction of Tylose cellulose esters significantly increases the water-holding capacity of mortar mixtures to 99.4-99.7%. However, despite the increase in water holding capacity, these mixtures do not reach the required strength for the grade above M100 without increasing the amount of binding material. At the same time, the introduction of C-3 superplasticizer effectively reduces the water-cement ratio (W/C), which helps to increase the strength of the hardened solution and allows to achieve the required strength indicators even for the M150 grade. Active mineral additives, such as finely ground limestone, stabilize the cement paste and help reduce delamination of the mixture. Additive grains fill the spaces between cement grains, increasing the packing density of solid components and, thus, improving the structuring of artificial stone. This helps to increase the strength and reduce the shrinkage of solutions. It is also important that the use of local raw materials, such as waste from stone mining and sandstone processing, allows to significantly reduce the cost of production of dry building mixes. The use of these materials provides not only economic benefits, but also helps reduce the environmental burden due to waste disposal. The results of the study confirm the perspective of using carbonate finely dispersed mineral additives as part of dry construction mixtures, which allows to improve their physical, mechanical and technological properties. This opens up new opportunities for creating effective building materials that meet modern requirements of quality and economic efficiency.

Usage Possibilities of Diatomite in the Concrete Production for Agricultural Buildings

Diatomaceous Earth-Lightweight Pozzolanic Admixtures for Repair Mortars-Complex Chemical and Physical Assessment

The use of raw and calcined diatomite in cement production

Effect of addition diatomite powder on mechanical strength, elevated temperature resistance and microstructural properties of industrial waste fly ash-based geopolymer

Diatomites from the Iberian Peninsula as Pozzolans

An Experimental and Empirical Study on the Use of Waste Marble Powder in Construction Material

Mechanical and thermal insulation performance of waste diatomite cement mortar

Heat-Resistant Ceramic Concrete Based Upon Diatomite. 1. Synthesis and Study of Artificial Ceramic Binders Based Upon Diatomite

The Influence of Diatomite Addition on the Properties of Geopolymers Based on Fly Ash and Metakaolin

Physico-mechanical, thermal insulation and resistance characteristics of diatomite and attapulgite based geopolymer foam concrete: Effect of different curing regimes

Preparation and Thermal Performance Testing of Diatomite-Modified Asphalt Pavements

Mechanical Properties of Concrete Produced by Light Cement-Based Aggregates

PROSPECTS OF USE OF SECONDARY WASTE OF THE CONSTRUCTION INDUSTRY IN THE PRODUCTION OF DRY BUILDING MIXTURES

Effect of aging on the mechanical properties of woven fabric-reinforced calcined diatomite substituted cement-based composites

A Review on the Incorporation of Diatomaceous Earth as a Geopolymer-Based Concrete Building Resource

Producing of Lightweight Concrete from Two Varieties of Natural Pozzolan from the Middle Atlas (Morocco): Economic, Ecological, and Social Implications

Aggregate blending optimisation in quarries to improve of the mechanical and environmental properties of concrete

Concrete Performance Produced Using Recycled Construction and By-Product Industrial Waste Coarse Aggregates

Effects of Diatomite on the Physiological and Purification Performance of Diatomite-Zeolite Vegetation Concrete

Properties of Cement-Based Materials Incorporating Ground-Recycled Diatom

Strength and Durability of Superplasticizer Concrete Based on Different Component Parameters: An Experimental and Statistical Study