Abstract:For the conventional Ni/SiO2 catalyst, it is a challenge to address the sintering problem of Ni particles, especially at high Ni loading. A series of Ni-phyllosilicate catalysts were prepared through the hydrothermal reaction of mesoporous SiO2 nanorods (SRs) and nickel nitrate, followed by an impregnation modification of CeO2. Hydrothermal temperature played an important role in the formation of nickel phyllosilicate. A small amount of Ni-phyllosilicate with a Ni content of 18.56 or 23.88 wt % was formed at a low hydrothermal temperature of 120 or 160 degrees C, and a large amount of nanosheet-like Ni-phyllosilicate with the Ni content as high as 31.65 wt % was obtained at a high hydrothermal temperature of 200 degrees C. The prepared Niphyllosilicate catalysts were beneficial to obtain Ni particles with small sizes (3.3-6.3 nm), even though they were reduced at 750 degrees C and possessed high Ni loadings (18.56-31.65 wt %) owing to the surface and interface confinement of nickel phyllosilicate. After the modification of CeO2 using an impregnation method, the CeO2 promoter could further reduce the Ni particle size and increase hydrogen and carbon dioxide uptakes. The CeO2-modified Niphyllosilicate catalyst (NPS-180-5C) was the best catalyst in this work, which could reach the thermodynamic equilibrium of CO methanation above 350 degrees C and exhibited high catalytic activity for CO2 methanation. In addition, for the 55 degrees C-100 h-lifetime test for CO2 methanation and 600 degrees C-6h-100% steam treatment tests, NPS-180-5C also showed an excellent antisintering property and higher hydrothermal stability than the impregnated one (N/SR-Im) owing to its special structure and confinement effect as well as promotion of CeO2 species. In all, the CeO2-modified SR-derived Ni-phyllosilicate catalyst could not only effectively suppress the problem of easy sintering of metallic Ni particles on the conventional Ni/SiO2 catalysts but also exhibit high catalytic activity and hydrothermal stability, which was a promising catalyst for both CO2 and CO methanation reactions.

Efficient utilization of silanol group in rice husk to promote the synthesis of Ni-phyllosilicate for CO 2 methanation

Efficient Utilization of Silanol Group in Rice Husk to Promote the Synthesis of Ni-phyllosilicate for CO2 Methanation

Preparation of Sustainable Ni/SiO2 Catalysts from Rice Husk by Different Methods for CO2 Methanation

High selective hydrocarbon and hydrogen products from catalytic pyrolysis of rice husk: Role of the ordermesoporous silica derived from rice husk ash for Ni-nanocatalyst performance

Synthesis of Ni-phyllosilicate assisted by fluoroboric acid for CO 2 methanation

Highly Efficient Ni-Phyllosilicate Catalyst with Surface and Interface Confinement for CO<sub>2</sub> and CO Methanation

Facile synthesis of Ni-phyllosilicate assisted by polyacrylamide at room temperature for CO 2 hydrogenation to methane

Silicon–nickel intermetallic compounds supported on silica as a highly efficient catalyst for CO methanation

Enhanced stability of Ni/SiO2 catalyst for CO2 methanation: Derived from nickel phyllosilicate with strong metal-support interactions

Green synthesis of MCM-41 derived from renewable biomass and construction of VO<sub>x</sub>- Modified nickel phyllosilicate catalyst for CO<sub>2</sub> methanation

Nickel Phyllosilicate Derived Ni/Sio2 Catalysts For Co2 Methanation: Identifying Effect Of Silanol Group Concentration

Interface-controlled synthesis of nickel phyllosilicate for efficient CO 2 hydrogenation to methane: Breaking limitation of the conventional silica-surface-controlled synthesis

Simultaneously quantitative and qualitative regulation of active sites of Ni-phyllosilicate for enhanced CO 2 hydrogenation to methane

Regulation of Metal Utilization Ratio and Active Sites of Nickel Phyllosilicates for Enhanced Co2 Methanation

Rapid construction of nickel phyllosilicate with ultrathin layers and high performance for CO2 methanation

Simultaneously Quantitative and Qualitative Regulation of Active Sites of Ni-Phyllosilicate for Enhanced Co2 Hydrogenation to Methane

Inducing Ni Phyllosilicate Formation over a Carbon Fiber Support As a Catalyst for the CO2 Reforming of Methane

MCM-41 from rice husk silica as a support for Ni catalyst in the emission-free production of H2 by CH4 cracking

Enhanced Performance and Selectivity of CO2 Methanation over Phyllosilicate Structure Derived Ni-Mg/SBA-15 Catalysts

Glycerol-assisted dynamic hydrothermal synthesis of nickel phyllosilicate for enhanced CO 2 methanation: Synergistic effect of stirring and viscous solvent

Extraction of Lignocellulose and Synthesis of Porous Silica Nanoparticles from Rice Husks: A Comprehensive Utilization of Rice Husk Biomass