Abstract:Investigations into Phase Change Materials (PCMs) for heat storage in facilities have gained significance, contributing to indoor temperature regulation, decreased energy usage, and improved building efficiency, thereby supporting sustainability initiatives. However, the issue of PCM leakage during the heating phase has constrained its thermal energy storage (TES) prospective at large scaled-practices. Addressing this concern, the present study emphases on elimination of the leakage problem of dodecyl alcohol (DA) as a PCM with appropriate melting temperature for building TES request by its impregnating into the natural zeolite (NZ) as a low cost host matrix. In the second stage of the work, using the developed shape stable-NZ/DA (SS-NZ/DA) composite PCM in cement mortar instead of sand, novel cementitious mortars with enhanced thermal properties were created by incorporating different weight percentages (25 %, 50 %, 75 %, and 100 %) compared to the mortar comprising NZ. Experimental works were carried out to analyze the shape-stability, TES features, cycling TES stability and thermal endurance of the SS-NZ/DA composite as well the physical properties, mechanical strength, and solar temperature regulation performance of the SS-NZ/DA included mortars. The SS-NZ/DA demonstrated the melting enthalpy of 107.5 J/g at 19.47 °C and a freezing enthalpy of 106.1 J/g at 19.86 °C. The performance test results obtained under real weather conditions indicated that the integration of SS-NZ/DA into mortar presented maximum drop of 10 % and 9.26 % in peak indoor temperature at the SS-CPCM slab surface and the center of SS-CPCM slab-cabin, respectively, accompanied by an approximate 3-hour time delay. Mortars with SS-NZ/DA composite PCM exhibited a decreased dry unit weight (1189 kg/m 3 ) and thermal conductivity (0.394 W/mK) while experiencing a moderate strength loss (4.5 MPa). These favorable physico-mechanical properties, TES characteristics and thermal management capability make the novel cementitious mortar containing composite PCM as an energy-efficient material for creating thermo-regulative building components. In this study, the natural, economical, and environmentally friendly nature of the NZ material used for PCM impregnation, its ability to contain a high percentage of PCM (up to 45 %) without any leakage issues, is the most fundamental and important characteristic of the composite used. The most unique feature of this composite mortar is the ability to achieve sufficient mechanical and thermal properties in cementitious mortars produced using this composite material without any leakage problems.

Thermal insulating coating mortars with mining and steel residues and the proposition of a "thermal insulating admixture"

Effect of waterproof agent on performance of inorganic lightweight aggregate thermal insulating mortar

Development and application of inorganic-organic compound thermal insulating mortar

Investigation of Physical-Mechanical Properties and Microstructure of Mortars with Perlite and Thermal-Treated Materials

Improving the thermal and mechanical performance of cement-based mortars for reinforcing masonry structures: computational and experimental methods

Preparation, microstructure, performance and mortar application of paraffin/titanium-bearing blast furnace slag phase change aggregate

Evaluation of Technological Properties of Mortars with the Addition of Plaster Byproduct

Experimental Study with Plaster Mortars Made with Recycled Aggregate and Thermal Insulation Residues for Application in Building

Experimental investigation of thermal and mechanical characteristics of slag cement mortars with PCM for radiant floors

Developing thermal insulation cement-based mortars with recycled aggregate in accordance with net zero principles

Applications of Sustainable Polymer-Based Phase Change Materials in Mortars Composed by Different Binders

Antifungal Susceptibility Assessment of Innovative and Non-Conventional Lime Mortars Incorporating Almond-Shell Powder Bio-Waste Subjected to Particle-Dispersion Technique

Mining waste and coconut fibers as an eco-friendly reinforcement for the production of concrete blocks

Use of sustainable Phase Change Material (PCM) in mortars for building energy efficiency

A novel cement mortar comprising natural zeolite/dodecyl alcohol shape stable composite phase change material for energy effective buildings

Preparation of EPS-Based Thermal Insulation Mortar with Improved Thermal and Mechanical Properties

Internal hydrophobic treatment for mortar containing supplementary cementitious materials: thermal analysis of kinetics and products of hydration

Experimental study and assessment of thermal energy storage mortar with paraffin/recycled brick powder composite phase change materials

Development of Asphalt Emulsion-Polystyrene Grain Thermal Insulation Mortars

Thermal management performance and mechanical properties of a novel cementitious composite containing fly ash/lauric acid-myristic acid as form-stable phase change material

Performance of Alkali-Activated Cementitious Composite Mortar Used for Insulating Walls