Fire And Smoke Detector Alarm Using Arduino And MQ2 Sensor

Sarthak Jagtap -,Hemlata Jadhav -,Prachiti Doshi -,Prathamesh Gatkal -,Aditya Kulkarni -

DOI: https://doi.org/10.36948/ijfmr.2023.v05i05.7584

2023-10-21

International Journal For Multidisciplinary Research

Abstract:The goal of this Research is to prevent fires caused by electrical short circuits and LPG Leakages in Houses.

What problem does this paper attempt to address?

Prototype Alat Pendeteksi Kebakaran Menggunakan Sensor Flame dan MQ-2 Berbasis Arduino Uno

Denny Andian Nugraha,Budy Satria

DOI: https://doi.org/10.33022/ijcs.v11i3.3102

2022-12-31

Indonesian Journal of Computer Science

Abstract:Fires can occur due to uncontrolled activities such as short circuits, littering of cigarette residues, gas leaks, human carelessness and natural factors that cause fires to appear. This research aims to design a prototype fire detector using a flame sensor to detect fire and an MQ-2 sensor to detect smoke and gas based on the Arduino Uno microcontroller. When these sensors detect the presence of fire, smoke and gas objects, the Buzzer and LEDs that have been programmed into indicators will be active as an early warning that a fire has occurred. The results of the tests that have been carried out in this study are the Arduino Uno Microcontroller works well to perform data processing. Testing the flame sensor at a distance of 5-25 cm causes the alarm to sound and the LED lights up as an indicator that the sensor is functioning in detecting hotspots. The MQ-2 sensor successfully detects the presence of smoke and gas at a density value of 760-775ppm. So this tool can help in providing a fire warning.
SMOKE DETECTOR SYSTEM WITH GSM MODULE

Himanshu Surana,Sourav Kumar Jha,Harshita Agarwal,Pooja Goyal,Prakash Dangi

DOI: https://doi.org/10.30780/ijtrs.v06.i08.004

2021-08-15

International Journal of Technical Research & Science

Abstract:This paper explains how to build a home fire alarm using an Arduino-based system and a GSM Module. The goal of the mission is to defend the home, with the principal goal of preventing hearth accidents to the occupants and the houses within the residence. It makes use of an Arduino Uno board and a GSM module. The Arduino microcontroller is the main controller, and it is used to operate the house alarm system, which is controlled by smoke sensors. An MQ2 smoke sensor is used to locate smoke because of fire. Through the GSM module, a short message service (SMS) alarm message may be sent to the customer. The machine detects smoke which has the presence of dangerous gases which include CO2, Methene and etc. and straight away triggers an alarm that's the house alert machine and also sends message to the proprietor of the residence using the GSM module via this device, it is able to assist customers to enhance their protection standards by means of having instant reaction in stopping injuries. Customers may ultimately be able to defend their lives and their houses against disasters as a result of this.
PROTOTIPE SISTEM PENDETEKSI POLUSI UDARA MENGGUNAKAN SENSOR ASAP MQ-2, SENSOR GAS MQ-6 DAN SENSOR API PADA RUANGAN DENGAN OUTPUT ALARM BERBASIS MIKROKONTROLLER ARDUINO

Asniati Asniati,Ery Muchyar Hasiri,Wa Ode Rosmiani

DOI: https://doi.org/10.55340/jiu.v11i2.1204

2022-12-29

Jurnal Informatika

Abstract:The current industrial development has entered the industrial era 4.0 marked by progress from various aspects, for example the development of microcontroller-based controller technology to be applied to smarthomes. One of them is controlling and monitoring dangerous air pollution and if it is inhaled directly by humans in large enough quantities it will cause health problems in respiratory function. There are various kinds of air pollution, such as CO and CO2 which are found in burning cigarettes or other burning which is carried out every day in households. In addition to hazardous substances, to support a complete smarthome-based research, it is also necessary to add a sensor to detect fires and gas leaks in households. This study aims to design and manufacture a room pollution detector using the MQ-2, MQ-6 and Flame Sensor sensors to detect air pollution caused by CO and CO2 and detect LPG gas leaks and detect fires with notifications via led matrix and based alarms. arduino . The results of this study indicate that to design and manufacture pollution detectors using a smoke sensor that uses Arduino Uno as a microcontroller that controls the work of the system connected to the MQ-2 sensor used to detect smoke, the MQ-6 sensor to detect LPG gas, and to detect fire use Flame. Sensor (Fire Sensor) DFR0076. From the results obtained by the MQ2 smoke sensor, the resistance value of the sensor will decrease when smoke is given, otherwise the sensor resistance value will increase when smoke is not given. The sensor resistance ranges from 150 Ω – 300 Ω when smoked and 1.5 KΩ to 1.7 KΩ when not smoked. gas sensor resistance increases when given gas and decreases when it does not detect gas. The sensor resistance when reading the presence of gas in the air is between 100 Ω - 400 Ω, and when it does not detect gas, it is 0 Ω - 12 Ω. On the Flame sensor, the sensor voltage value changes when it detects fire. The voltage value increases if it detects fire and vice versa the sensor voltage decreases when it does not detect fire. The sensor voltage value when detecting fire is between 1.2 Volts – 5 Volts, while when it does not detect fire, it is between 0 Volts – 0.9 Volts.
Design of Smoke Detector for Smart Room Based on Arduino Uno

Dirja Nur Ilham,Rudi Arif Candra,Muhammed Saat Talib,Mario di Nardo,Khusnul Azima

DOI: https://doi.org/10.47709/brilliance.v1i1.1079

2021-09-04

Abstract:Smoke is one of the air pollutions that is very detrimental to the health of both the smoker himself and others around him. Inhaling other people's smoke is even more dangerous than inhaling your own smoke. Even the dangers that must be borne by passive smokers are three times greater than the dangers of active smokers. Smoke is also very detrimental to the health of patients in hospitals, especially patients who suffer from asthma. For people with asthma who have problems in the respiratory tract, asthma can recur at any time due to inhaling smoke. This research will develop a smart room that can detect smoke to maintain and protect the room from smoke that interferes with health. The tool to be developed uses an MQ2 sensor, LCD, exhaust fan, buzzer, and Arduino Uno microcontroller. Where an MQ2 sensor is needed to detect smoke around it, an LCD is needed to display the percentage of smoke, a microcontroller as a controller for all components, a buzzer is used as an alarm when the smoke level in the room is unhealthy, and the exhaust fan functions as a sucker for dirty air so that the smoke level in the room can be reduced.
SMOKE DETECTION DESIGN USING MQ-2 SENSOR AND EXHAUST FAN BASED ON MICROCONTROLLER

Widodo Widodo,Rahmat Hanif Darmawan,Adi Winarno

DOI: https://doi.org/10.36456/best.vol5.no1.7216

2023-08-07

Abstract:Clean air is a very important requirement for life on earth, especially for humans. Nowadays people are competing to maintain air quality in their environment by using Air Conditioners (AC). The use of air conditioning in the home environment without us knowing that the air we breathe is contaminated with smoke. The smoke in the air-conditioned room cannot escape because the room is always closed. As a result, the smoke content that cannot escape is very dangerous, so a prototype of an indoor smoke detector is made using the Arduino microcontroller and the MQ-2 sensor as a smoke sensor. If smoke is detected by the MQ-2 sensor, Arduino will turn on the bazzer and fan.
Smoke Alarm System Using Tinkercad, Arduino,Wifi Module and Thingspeak.

Mamta Koban,Tanmay Sanjay Walzade,S. Wani,Yash Yadav

Abstract:: Generally multistory buildings use wireless sensor networks.There are various types of detectors equipped in buildings that repeatedly measure smoke, temperature or humidity for cloaking fires as soon as possible. The results of the model demonstrate the automatic smoke alarm system matches the design requirements. The project primarily encloses the development and application of monitoring and smoke detection systems based on wireless sensor networks. The smart alarm system continuously monitors the surroundings and records the temperature, humidity and smoke level using different sensors. The results display the thorough performance of the system is excellent.

Engineering,Environmental Science,Computer Science
Prototype Monitoring of IoT-based Laboratory Firefighting System

Setiaji Cahyadi,Joni Karman,Muhammad Nur Alamsyah

DOI: https://doi.org/10.47065/bits.v3i3.1142

2021-12-31

Abstract:The problem in this study is the absence of automatic firefighters that helps performance on 24-hour safeguards so that it is very susceptible to a short circuit or electrical relations that lead to fires that cause enormous losses both material and immaterial. This research uses the prototype method. The results showed that the planning of making hardware and software regarding planning fire extinguishers using the Arduino Uno board and a fire sensor or flame sensor and a gas sensor or MQ2 Sensor as a foundation where the hardware can be input on the Arduino IDE software and connected to WiFi ESP2866 as a IoT controller and control the room in 24 hours because this tool has a buzzer so that if there is a fire and smoke detected can turn on the sensor and the arm arises, the warning will be a fire hazard.
Gas Leakage with Auto ventilation and Smart Management system Using IOT

Dr. B.Madhusudhan Reddy

DOI: https://doi.org/10.55041/ijsrem12737

2022-05-03

INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT

Abstract:In the evolving smart home architectures, the issue of gas spillage and fire is still remaining as a significant hindrance for designing a comprehensive, safe and sustainable kitchen model. On the other hand, security has also been significant challenge in this digital era. In urban areas, most of the kitchens are very small and it doesn’t contain proper ventilation system. In such case, Spillage of gas increases the risk of fire accident, suffocation or a blast. To eradicate this challenge, smart management system viz. gas leakage detection and fire detection system should be developed. In this paper, Arduino UNO microcontroller was utilized to build a smart gas detection system with many usable sensors (MQ2, IR Fire Sensor) and actuators (air fan, buzzer). When gas spillage is recognized, the client will be intimated through SMS and at the same time they will receive notification via blynk application. The proposed system can detect fire, gas leakage and it also has the ability to take further steps and decrease gas concentration via auto air ventilation and extinguish fire with water. The proposed method will help to improve the safety and reduce the death toll and reduce the damages that occur to the surrounding environmentt. Keywords: Arduino; alarmnotifications; gas leakage detection; fire detection; home security.
Study of MicroController Based Fire alarm circuit using Temperature Sensor

B. Aravind,Alishetty Ramu,B. M. Bhavani,Chillakuri AkshayKumar

2017-01-23

Abstract:— Fire alarm system performs an foremost function in keeping and monitoring the trustworthy of all type environments and situations. However the usability of many existing hearth alarm system is good recognized however could be produce with excessive cost. Therefore, it is no longer low-priced for the low sales users. The main function of this undertaking is to make a fireplace control system with low rate. The challenge has three fundamental methods, 1) the detection system, 2) the monitoring approach and 3) the appliance system. The detection system operates as the fire detector. This detection method has add-ons like flame detector, smoke detector, light detector, heat detector and many others. This paper discusses the design and implementation of a fire alarm method making use of the microcontroller which operates the whole method.

Computer Science,Engineering
Microcontroller Based On Fire Alarm System Using Sensory And Monitoring System

L. Ravindran,M. Ghazaly,A. C. Amran

2007-11-01

Abstract:Fire alarm system plays an important role in maintaining and monitoring the safe of all kind environments and situations. However the usability of many existing fire alarm system is well known but could be produce with high cost. Subsequently, it is not affordable for the low income users. The main objective of this project is to produce a prototype of multilevel operating Fire Alarm system (M-F AS) with low cost. The M-F AS has two main systems, the detection system and the monitoring system. The detection system operates as the fire detector. This detection system has three detection components which are flame detector, smoke detector and heat detector. This paper discusses the design and implementation of a fire alarm system using the microcontroller which operates the entire system. The detectors are placed in parallel in different levels. Any signal from each detector at any level is monitored using the monitoring system. The monitoring system is developed by using the Visual Basic 6.0. The entire system is controlled by the microcontroller. The microcontroller is been programmed in such way by using the microC compiler. From the experiment done, the prototype of the M-F AS detects fire when existing of smoke, flame and heat sensed by the detectors, followed by the monitoring system which indicates smoke, flame and heat at that particular level. Finally when all the three sensors from each level triggered, the main buzzer and piezo buzzer at that particular level operates. Hopefully with the development of the M-F AS, it helps all the users at any level of income to have one at their home or office.

Engineering,Environmental Science
Air Quality Detection and Notification using Arduino IDE

Mallikarjun Mudda,Madishetty Vivek,Jadhav Sachin,Dasari Rohith Reddy

DOI: https://doi.org/10.22214/ijraset.2023.48572

2023-01-31

International Journal for Research in Applied Science and Engineering Technology

Abstract:Abstract: Truck drivers typically work long hours and occasionally in highly polluted settings like mines. Accident prevention at the workplace relies heavily on the health and alertness of the driver. The cabin's air quality can sometimes get worse, which can make drivers tired. A gas detector is a piece of equipment that works as part of a safety system to tell you if there are gases in a certain area. This type of project can communicate with the control system to automatically switch off process and is used to detect gas leaks and other emissions. There are numerous gases that can be harmful to organic life, such as humans or animals, which is why this kind of device is important. Oxygen depletion and combustible, flammable, and toxic gases can be detected with gas detectors. This kind of device is used a lot in industry and can be found monitoring manufacturing processes in places like oil rigs. Gas leak detection is the process of using sensors to find gas leaks that could be dangerous. When a hazardous gas is detected, these sensors typically emit an audible alarm. Early detection of gas leaks, when they occur, is one way to cut losses caused by leaks. One of the many technologies that helps stop gas leaks from harming people even more is the mobile sensor. Another approach to overcoming losses from both material and non-material sources is the creation of mobile sensors. It is anticipated that it will eventually be overcome using a gas sensor MQ-2 as a detector before it has a wider impact. MQ-2 is chosen due to inexpensive and long lifespan. The Arduino IDE is used to implement the C language, which is used to calibrate and configure MQ-2. With a distance of about 0-10 cm between the gas sensor and the point of leakage, it is anticipated that the results will be accurate to 80 percent after the gas sensor has been configured.
Smart Fire-Alarm System for Home

Jihoon Kang,Shreya Basnet,Sardar M. Farhad

DOI: https://doi.org/10.1007/978-3-030-22354-0_42

2019-06-21

Abstract:Internet of Things (IoT) is an emerging technology that can be used to design smart systems without incurring lots of money. Although, the legislation forces to install an analog fire alarm system to every household in modern era, the system is not smart enough to send immediate notifications to the concerned individual. The analog fire alarm cannot avoid the immediate risk or damage of fire as no one stays at home all the time. The earlier the incident is reported to the concerned individual the better to reduce the fire damage. In this paper, we have proposed a smart fire-alarm system that consists of a smoke sensor and a sound sensor that can detect the smoke and the noise of the analog fire alarm system (with a view to detect whether the analog fire alarm system is working) respectively, and can notify the user about the status immediately. We have implemented the proposed smart fire-alarm system and conducted experiments to determine the effectiveness of the system. The results show that the system is reliable under various conditions of smoke and alarm noises.
PERANCANGAN SISTEM KEAMANAN RUMAH BERBASIS IoT DENGAN NodeMCU ESP8266 MENGGUNAKAN SENSOR PIR HC-SR501 DAN SENSOR SMOKE DETECTOR

M. Reza Hidayat,Christiono Christiono,Budi Septiana Sapudin

DOI: https://doi.org/10.33322/kilat.v7i2.357

2018-11-30

Kilat

Abstract:Along with the development of science and technology, problems often occur that threaten security at home. These problems originate from a level of security that does not meet security standards at home. Various problems that can threaten home security conditions are fire hazards that can be caused by neglect of home temperature regulation and electrochemical equipment that is uncontrolled by the homeowner or thief danger that can easily enter the house. The design of the home security system prototype is programmed and controlled by the NodeMCU ESP-8266 to transmit all data from sensor readings to the interface on the Cayenne dashboard. PIR sensor (HC-SR501) has a digital output, if the sensor detects a movement, the NodeMCU ESP-8266 will give a logical value of one. Gas sensor concentration (MQ-02) in testing has an average difference of 2.79 ppm (part per million). The reading results of all sensors will be measured through the Internet of Things interface displayed on the Cayenne dashboard, the simulated gas concentration with gas matches with the difference results, test results and analysis results of 2.79 ppm (part per million) and if the gas sensor (MQ -02) Exceeds the specified parameters, the buzzer will sound. PIR sensor testing (HC-SR501) will work optimally by human movement if at an angle of 45 ̊ because the success rate is 100% in ten experiments and in the 90 ̊ angle the success rate is 80%.
Design Of Fire Early Detection System Using Microcontroller As Smoke And Sprinkle Detection Using Fuzzy Mamdani Logic Method

Tengku Falih Diny Nurfikri,Sriani Sriani

DOI: https://doi.org/10.59188/eduvest.v4i8.1783

2024-08-20

Eduvest - Journal Of Universal Studies

Abstract:This research presents the design of a fire early detection system utilizing a microcontroller integrated with Mamdani fuzzy logic. The system employs multiple sensors, including temperature, gas, and infrared sensors, to detect fires by analyzing the temperature, gas concentration, and fire distance. The microcontroller serves as the core processor that controls the sensors and triggers responses, such as alarms and sprinkler activation, based on fuzzy logic-based decision-making. Fuzzy logic enhances the system's adaptability to different fire severity levels, improving response accuracy. The system successfully detects potential fires, controls the sprinkler system automatically, and is shown to improve fire prevention in various environments. Testing results indicate that the system can effectively identify fire hazards and minimize damage by responding appropriately to various fire scenarios. This research provides a foundation for developing smarter and more efficient fire safety systems.
A SMART FIRE DETECTION SYSTEM USING GSM TECHNOLOGY WITH AUTOMATIC WATER SPRINKLER

T. Aravind Babu,

DOI: https://doi.org/10.55041/ijsrem18260

2023-03-22

INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT

Abstract:Fire is one of mankind’s greatest discoveries but can also be a great source of danger in accidents. Fire in any occupancy has the potential to cause harm to its occupants and severe damage to the property. As a solution a smart fire detection system is designed using GSM technology, smoke/Flame sensors, and Arduino technology, water sprinkler system, LCD display, buzzer,. A smoke sensor is used to detect the smoke from the fire and Flame sensor. In a event of a The microcontroller is used to process the sensor circuitry input, and also used to turn on the LCD, exhaust fan, water pump motor and the main supply switch will be switched off (switch open). It turns on the GSM modem after that, it continues to send SMS to mobile number for alerting danger to the people. This system helps users to respond immediately to the situation and so improve their safety by protecting their lives and the properties from fire hazards. Key Words: : Fire Safety, water Sprinklers system, Exhaust fan, GSM, Arduino uno, low cost.
Design of Arduino-based LPG Gas Leak Detection Tool using MQ-6 Sensor

Diaz Resnu Pamungkas,Agus Setiawan,Andi Widiyanto

DOI: https://doi.org/10.31603/itej.10687

2024-01-30

Abstract:LPG (Liquefied Petroleum Gas) is a natural resource that has increased yearly consumption. LPG gas is used almost every time for human life in the household and industry sectors. LPG gas, besides being cheap, is also easier to use. However, the increasing use of LPG gas also increases the risk of fire or gas collection caused by LPG gas leaks. Therefore, a tool is needed to detect LPG gas leaks. So an LPG gas leak detector was made using the MQ-6 sensor, which can detect LPG gas leaks, and using a blower fan to overcome the collection of gas levels around LPG gas cylinders, using a buzzer as an alarm, using a servo to turn off the electricity so that an explosion does not occur, and use spray foam to spray onto the tube and stove if the blower cannot handle the LPG gas leak. Overall, the design components are controlled by Arduino Uno R3. This testing process takes an average of 9.56 seconds. If it is less than 9.56 seconds, then only one action is enough: the blower fan, active buzzer, and pump 1. If it is more than 9.56 seconds, the second action will be continued: spraying foam and turning off the electricity. On the other hand, there is an opportunity to bring this tool to commercial. Many households need this tool to save their house from fire threats. Finally, this tool can be a development tool for solving an incident from gas and will be a best-selling tool.
Design of Multi-gas Monitoring Device for Indoor Air Quality

Serri Abdul Razzaq Saleh,Huda Jamal Jumaah,Zainab Ali Khalaf,Sarah Jamal Jumaah

DOI: https://doi.org/10.30564/jeis.v5i1.5390

2023-02-24

Journal of Electronic & Information Systems

Abstract:Besides the need for low-cost instruments for air pollution measurement and detection, nowadays there are many concerns about air pollution due to the fast changes and used technologies. This research was applied using an MQ2 gas detector, and microcontroller/Arduino-Uno. The design steps included bonding and connecting readymade sensors, coding, and finally testing the device. Testing has been conducted in Environment and Pollution Engineering Department laboratories, at the Technical Engineering College of Kirkuk. This study proposed the use of an MQ2 sensor for multi-gas rate detection which can exist indoors. The system uses also a DHT22 sensor for measuring environment temperature and humidity. The sensors are connected to Arduino and LCD to present data on LCD by powering the system with external power. Overall, the testing was conducted, and the device served as a measuring tool for indoor air as an accurate multigas rate detector.
Implementasi Sensor MQ2 Sebagai Pendeteksi Kebocoran Gas Pada Fire Alarm Dengan Android

Taufiiqulhakim Jubair,Arnisa Stefanie

DOI: https://doi.org/10.32493/epic.v5i1.20335

2022-06-30

EPIC Journal of Electrical Power Instrumentation and Control

Abstract:Keamanan merupakan salah satu bagian yang layak diperlihatkan dalam suatu bagian yang layak diperlihatikan dalam suatu sistem ataupun lingkungan. yang melingkupi wilayah perkantoran, wilayah kampus, wilayah pedesaan atau perkotaan dan pusat pembelanjaan yang rawan terjadinya kebakaran. Kebakaran seringkali disebabkan oleh kelalaian manusia, antara lain kebocoran kecil atau besar dari tabung LPG ( Liquefied Petroleum Gas ), puntung rokok karena dibuang sembarangan, hubungan pendek arus listrik yang menimbulkan api dan merembat ke hal lain. Adapun tujuan dari penelitian ini untuk mengetahui seberapa efektif sensor MQ2 dalam mendeteksi adanya kebocoran gas melalui aplikasi bylnk yang nantinya dapat digunakan untuk memberikan sebuah pemberitahuan adanya kebocoran gas dan menggunakan buzzer sebagai alarm. Metode penelitian yang akan digunakan yaitu melakukan perancangan dan perakitan alat menggunakan sensor MQ2, buzzer dan nodeMCU. Hasil pengujian menunjukkan bahwa aplikasi blynk mampu memberikan notifikasi dari sensor dan menyalakan buzzer ketika ketebalan gas melebihi dari 360 ppm.
The Design of Fire Alarm System Based on Microcontroller ATmega16L

Yang Le

Abstract:The system is controlled by microcontroller ATmega16,while the temperature sensor DS18B20 and gas sensors 2M007 receive fire signal.Through the intelligent processing,sound and light alarm is sent out in the form of pulse dialing,thus,danger message is transmitted by the telephone line got through by a pre-set the phone number so as to give a multiple-alarm warning.

Computer Science,Engineering

Fire And Smoke Detector Alarm Using Arduino And MQ2 Sensor

Prototype Alat Pendeteksi Kebakaran Menggunakan Sensor Flame dan MQ-2 Berbasis Arduino Uno

SMOKE DETECTOR SYSTEM WITH GSM MODULE

PROTOTIPE SISTEM PENDETEKSI POLUSI UDARA MENGGUNAKAN SENSOR ASAP MQ-2, SENSOR GAS MQ-6 DAN SENSOR API PADA RUANGAN DENGAN OUTPUT ALARM BERBASIS MIKROKONTROLLER ARDUINO

Design of Smoke Detector for Smart Room Based on Arduino Uno

SMOKE DETECTION DESIGN USING MQ-2 SENSOR AND EXHAUST FAN BASED ON MICROCONTROLLER

Smoke Alarm System Using Tinkercad, Arduino,Wifi Module and Thingspeak.

Prototype Monitoring of IoT-based Laboratory Firefighting System

Gas Leakage with Auto ventilation and Smart Management system Using IOT

Study of MicroController Based Fire alarm circuit using Temperature Sensor

Microcontroller Based On Fire Alarm System Using Sensory And Monitoring System

Air Quality Detection and Notification using Arduino IDE

Smart Fire-Alarm System for Home

PERANCANGAN SISTEM KEAMANAN RUMAH BERBASIS IoT DENGAN NodeMCU ESP8266 MENGGUNAKAN SENSOR PIR HC-SR501 DAN SENSOR SMOKE DETECTOR

Design Of Fire Early Detection System Using Microcontroller As Smoke And Sprinkle Detection Using Fuzzy Mamdani Logic Method

A SMART FIRE DETECTION SYSTEM USING GSM TECHNOLOGY WITH AUTOMATIC WATER SPRINKLER

Design of Arduino-based LPG Gas Leak Detection Tool using MQ-6 Sensor

Design of Multi-gas Monitoring Device for Indoor Air Quality

Implementasi Sensor MQ2 Sebagai Pendeteksi Kebocoran Gas Pada Fire Alarm Dengan Android

The Design of Fire Alarm System Based on Microcontroller ATmega16L