Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Multi-objective optimization of heat transfer performance and power consumption of Taylor-Couette flow with elliptical helical slits wall

Multi-objective Optimization of Transpiration Cooling for High Pressure Turbine Vane

Multi-objective optimization of a novel vortex finder for performance improvement of cyclone separator

Thermal-Hydraulic Performance and Optimization of Tube Ellipticity in a Plate Fin-And-Tube Heat Exchanger

Optimization of Twist Winglets–Cross-Section Twist Tape in Heat Exchangers Using Machine Learning and Non-Dominated Sorting Genetic Algorithm II Technique

Multi-objective Optimization of a Solar Receiver Considering Both the Dimple/protrusion Depth and Delta-Winglet Vortex Generators

Multi-objective Optimization of Turbulent Heat Transfer Flow in Novel Outward Helically Corrugated Tubes

Multi-objective hydrothermal performance optimization of a microchannel heat sink equipped with delta winglet vortex generators using NSGA-II genetic algorithm

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Multi-Objective Optimization of the Impingement-Film Cooling Structure of A Hpt Endwall Using Conjugate Heat Transfer Cfd

Multi-objective Optimization Towards Cooling Performance of Teardrop Section Kagome Trusses Array Jet Impingement Composite Cooling Structure with Cross-Flow

Characteristics analysis and structure optimization of a hybrid micro-jet impingement/micro-channel heat sink

Multi-objective Optimization of Heat Transfer in Microchannel for Non-Newtonian Fluid

Multi-objective optimization of helically coiled tube heat exchanger based on entropy generation theory

Performance investigation and multi-objective optimization of helical baffle heat exchangers based on thermodynamic and economic analyses

Multi-Objective Optimization of the Microchannel Heat Sink Used for Combustor of the Gas Turbine

Configuration optimization of shell-and-tube heat exchangers with helical baffles using multi-objective genetic algorithm based on fluid-structure interaction

An Efficient Approach For Performance Evaluation And Parameter Design Of Heat Transfer Enhancing Structure

Study of Optimization Method Based on Deep Learning for Flow and Heat Transfer Characteristics Within Lantern-shaped Pin Fin Channel

A Comprehensive Simulation and Optimization on Heat Transfer Characteristics of Subcooled Seawater Falling Film Around Elliptical Tubes

Multi-objective optimization of a double helical coil heat exchanger using response surface method and genetic algorithm