Abstract:Traffic noise is a major problem in all large cities. The surface acoustical characteristics (e.g. referred to roads, pedestrian traffic areas, building façades, building surfaces, in general) affect the noise propagation in the urban environment. Through a better outdoor design and management (e.g. by means of green areas, porous asphalt, speed control), or building refurbishment actions (acoustic plaster, absorbing shading devices), the increasing of surface absorption could be useful to mitigate noise environmental pollution, and therefore to reduce the sound levels in the proximity of the building façades for their entire height. The reduction of the noise levels outside the buildings would determine lower indoor noise levels, and therefore a better situation, without direct actions on the building walls. Through a series of noise propagation calculations in urban environments, by means of a three-dimensional simulation model, the influence of some configurations and the potential impact of some intervention solutions are quantified. In the first stage of the research, the analysis of a simplified model is conducted, to evaluate the influence of noise on the building façades, based on a simplified geometry of the urban environment and of the surface acoustic features. The same analysis is validated by means of a more detailed model, corresponding to the configuration of an existing built area, to verify if the analyses performed by means of the simplified model can be extended to more complex layouts. Successively, calculations are developed to quantify the noise levels that occur with different acoustic (absorption of façades, soil, asphalt, or green elements) and geometric (road width, buildings height, presence of balconies, etc.) characteristics to show the potential reduction given by some interventions. Solutions that can lead to a more significant reduction of the noise in correspondence of the façades are then summarized. The simplified geometrical model appears to be suitable for preliminary investigations as the maximum error found for narrower roads is equal to 17%.

Study of Sound Absorbing Panels Used in Road Traffic

Recent progress in acoustic materials and noise control strategies – A review

Sustainable Approach to Achieve New Green Solutions for the Construction Industry

Sound Absorbing Materials and Sound Energy Conversion

State-of-the-Art Review on Sustainable Design and Construction of Quieter Pavements—Part 1: Traffic Noise Measurement and Abatement Techniques

Noise Reduction Interventions in the Urban Environment as a form of Control of Indoor Noise Levels

A Study on the Effect of Natural Regenerated and Synthetic Non-woven Fabric Properties on Acoustic Applications

Recent Trends in Porous Sound-Absorbing Materials

Sound Absorption Performance and Mechanical Properties of the 3D-Printed Bio-Degradable Panels

Assessment of Road Noise Pollution in Urban Residential Areas—A Case Study in Piteşti, Romania

A simplified model to evaluate noise reduction interventions in the urban environment

A study on the new PET composite sound-absorbing material applicable to automotive interior materials

Opportunities to use textile waste for the production of acoustic panels

Investigation of Acoustic Properties of Different Types of Low-Noise Road Surfacers under In Situ and Laboratory Conditions

An innovative approach for the development of sound absorbing material using industrial wastes

Investigation on an Absorbing Layer Suitable for a Noise-Reducing Two-Layer Pavement

Research and application of combined noise reduction method by using noise reducing pavement and noise barrier

Measuring Methods of Acoustic Properties and Influence of Physical Parameters on Natural Fibers: A Review

Sound insulation properties of materials and methods used in civil engineering

Noise responses before and after noise abatement measures in a residential intervention project

Soundscape Design in an Urban Natural Park