Abstract:The Government of Ethiopia is trying to improve sugar industry sector by establishing new factories, expansion projects and rehabilitation of existing ones. The main input in this process is agricultural mechanization; however it has been resulted in a huge number of farm machinery of various types and sizes, without consideration of proper selection and matching between tractors and their attachments (implements). This approach had led to high cost of agricultural operation, resulted in an unbalanced distribution of machinery and the agricultural operations throughout the years. Wonji Shoa Sugar factory is one of the victims of the aforementioned problem. The present study was conducted to evaluate the current farm machinery selection practices of Wonji Shoa Sugar Factory. Three soil types namely; heavy clay, vertisol and sandy loam were selected with four field activities (subsoiling, ploughing, harrowing and furrowing). For subsoiling, ploughing and harrowing, 9410-R John Deer tractor with implements of 5 shank and 3.2 m wide mounted subsoiler, 2.8 m wide double gang offset disc plough, and 3.5 m wide semi mounted four gangs double offset were used respectively. For furrowing YTO-1804 tractor and a four bottom fully mounted 4.5 m wide rider was used. For each experiment, the draft force requirement of the implements, the drawbar power, fuel consumption, overall energy efficiency and power utilization ratio were determined at different tractor travel speeds. Subsoiling, ploughing and harrowing were activities were evaluated at the travel speed of w 3, 4, 5 and 6 km/hr. And a travel speed of 4, 5, 6 and 7 km/hr were used for furrowing operation. Linear regression tests were run to examine the interactions between the factors and determine their significant impact. The results of this study noted for furrowing operation as lowest draft force, drawbar power, fuel consumption and energy efficiency of 14 kN, 12.65kW, 13 lit/hr and 8.7 % respectively in sandy loam soil type. The maximum Draft force of 79.8 kW and drawbar power of 131 kW was noted for subsoiling operation in Heavy clay soil. Moreover the results of all operation in all soil type, as indicated by both overall energy efficiency and power utilization factor shows the mismatch between the tractor and implements, as the tractors were overpowered. That means a less amount of the available power from the tractor is being used to operate the implement. If the tractor had been matched with a bigger and compatible implement a better efficiency and higher productivity of the tractor implement combination could have been achieved.

Performance Evaluation of Tractor Operated Cotton Stalk Shredder Cum Uprooter

Study on design of crop residue choppers for hard stalks

Experimental studies on chopping cotton stalk and briquetting process

Statistical optimization, characterization and effect of process variables on cotton stalk pellets using tractor drive pelleting machine

Design and assessment of tractor-driven chopping tilling and mixing machine for in-situ management of paddy straw

Performance Evaluation of Power Operated Cyclonic Cotton Picker

Critical assessment of furrow openers and operational parameters for optimum performance under conservation tillage

Optimization of a Whole-Stalk Operating System after Sugarcane Base Cutting

Field Performance Evaluation of Power Weeder for Paddy Crop

Performance Assessment of Tractor-operated Bund Former for Mulched Field

DESIGN AND FIELD TEST OF A NEW COMPACT SELF-PROPELLED CABBAGE HARVESTER

Performance Evaluation of an Imported Machine for Corn Threshing

Multi-objective optimization for minimize cutting force and power consumption in corn stalk chopping processes

Optimizing mechanical and crop physical factors for sugarcane trash recovery at farm

Determination of operation performance indicators of unit for mowing crops with the simultaneous incorporation of their stubble into the soil

Prototype of Corn Thresher Unit for Corn Combine Harvester

Hybrid taguchi-grey relational analysis approach for optimizing cutter operational parameters in selective cauliflower harvesting

Development and tests of a self-propelled cabbage harvester in China

EFFECT OF STRAW MOISTURE ON PERFORMANCE OF MULCHER IN PADDY STUBBLE FIELD

Evaluation of Current Farm Machinery Selection Practices of Wonji Shoa Sugar Factory