Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Wear of rolling elements can produce a huge impact on the mechanical properties of screw-nut joint, and is one of primary causes resulting in the accuracy degradation or even failure of kinematic pairs. Many mechanical models have been constructed to investigate the vibration performance of rolling elements. But the wear influence is considered scarcely because of the complicacy of loading status and wear process. In this study, a novel wear prediction model can be proposed for screw-nut joint to overcome the above difficulty. An ultimate stiffness model can be constructed on basis of the wear model. The influences of running distance, external forces, preload, and structural parameters on wear performance are researched. A dynamic model of screw-nut joint with varying stiffness is constructed to carry out a detailed study on its vibration performance, particularly taking into account the coupling effect between wear and vibration. The influences of wear on the axial stiffness and vibration characteristics are studied based on the proposed model. Moreover, the change rules of axial stiffness and dynamic response under variable preloads are researched. The results indicate that the choice of parameters can produce an appreciable impact on the wear rate. The wear can result in the losses of stiffness and critical displacement of screw-nut joint. Although increasing the preload can improve the stiffness and the critical displacement, it also aggravates the wear degree. When the relative displacement between nut and screw is greater than the critical displacement, the balls with preload and axial force in opposite directions will be out of action, and the monotonic property of stiffness will also change. Due to the monotonicity of stiffness is not consistent before and after the critical displacement point, the amplitude-frequency curve presents a jumping phenomenon.

Study on the rate of change of thread angle and thread distance considering the interference factor under before and after the dynamic vibration of the fastening system

Study on the fastening property of precision locknut under simulated dynamic impact loading with consideration of interference factors

Study on advanced assembly characteristics of locking with radial anti-loosening precision locked-nut while maintaining the design rigidity under dynamic precision fastening system

Analysis of Process Parameters Influencing Protuberance During Interference Fit Installation of Hi-lock Bolts

Numerical and Experimental Investigation on the Rivet Head Flushness in Automatic Countersunk Riveting

Experimental Study of the Loosening of Threaded Fasteners with Transverse Vibration

Three-dimensional finite element analysis of tightening and loosening mechanism of threaded fastener

Three-dimensional finite element analysis of tightening and untightening process of bolt and nut connections with slight pitch difference

An Analytical Model For Rotation Stiffness And Deformation Of An Antiloosening Nut Under Locking Force

Stability analysis of nut coefficient of aero-engine rotor connection bolt

High Precision Control Method Of Pre-Tightening Force For Threaded Connection Of Joining-Separation Mechanism In Aircraft

Changing behavior of friction coefficient for high strength bolts during repeated tightening

Experimental study on initial loss of tension in bolted joints

Study on local slippage accumulation between thread contact surfaces and novel anti-loosening thread designs under transversal vibration

Model and nonlinear dynamic characteristics analysis of screw-nut joint considering coupling effect of wear and vibration

Experimental Study on the Influence of Cutting Parameters on Thread Precision of External Thread Turning

Study on hysteresis and threaded fitting behavior of bolted joint with non-parallel bearing surface

The Factors Influencing Torque-Preload Relationship of Bolted Joints in Heavy Truck

Anti-loosening mechanism of pitch difference bolt nut connections based on Junker loosening test

Critical load determination for preventing rotational loosening in bolted joints under dynamic transverse loads

Investigation on the Influence of Interference Fit on the Static and Dynamic Characteristics of Spindle System