Abstract:The main purpose of this research is to bolster mechanical properties of the parts, produced by an extrusion-based 3D printer, or fused deposition modeling machine, via increasing the content of continuous fiber yarn to its practical limit. In-melt continuous glass fiber yarn embedding was applied as a reliable and consistent method for simultaneous impregnation to produce continuous fiber-reinforced thermoplastic composites in the fused deposition modeling process. It is well known that the main weakness in the fused deposition modeling 3D printed products is their low strength compared to the manufactured ones by conventional methods such as injection molding and machining processes. This characteristic can be related to both inherent weakness of thermoplastic materials and poor adhesion between the deposited rasters and the layers. Although various attempts have been performed to tackle this issue, it is widely believed that using continuous fibers is the most effective method to serve this purpose if a reliable and consistent method is implemented. Since the mechanical properties of continuous fiber-reinforced composites directly depend on the content of fiber volume, maximizing the fiber content as well as producing an integrated part was assumed as the main objective. In this work, an analysis of various patterns of raster deposition was conducted, followed by the experiments and verification. The effective parameters on the fiber yarn volume, such as fiber yarn diameter, fiber yarn laying pattern, extrusion width, layer height, and flow percentage, were investigated and their optimal values were reported. The attained experimental results showed that, for polylactic acid-glass fiber yarn reinforced composite, with the extrusion width of 0.3 mm, the layer heights of 0.22 mm, flow percentage of 0.43, and the rectangular laying pattern, approximately 50% fiber-volume content can be achieved which resulted in tensile yield strength and modulus of 478 MPa and 29.4 GPa, respectively. There was an excellent agreement between these experimental results and predicted theoretically values by rule of mixture.

Fabrication of continuous woven E-glass fiber composite using vat photopolymerization additive manufacturing process

An innovative design approach in three-dimensional printing of continuous fiber–reinforced thermoplastic composites via fused deposition modeling process: In-melt simultaneous impregnation

Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication

Selectively embedding multiple spatially steered fibers in polymer composite parts made using vat photopolymerization

Continuous fibre reinforced Vat photopolymerisation (CONFIB-VAT)

Fabrication and Testing of Hybrid Polymer Composite Material by Using Carbon, Glass, Kevlar Fibers

Mechanical and Material Characterization of 3d Printed Continuous Fiber Reinforced Photopolymer Matrix Composites

Process parameters and mechanical properties of continuous glass fiber reinforced composites-polylactic acid by fused deposition modeling

A Continuous Fiber-Reinforced Additive Manufacturing Processing Based on PET Fiber and PLA

G-code Generation for Deposition of Continuous Glass Fibers on Curved Surfaces using Material Extrusion-based 3D Printing

Dynamic Capillary-Driven Additive Manufacturing of Continuous Carbon Fiber Composite

A Novel Route to Fabricate High-Performance 3D Printed Continuous Fiber-Reinforced Thermosetting Polymer Composites

A hybrid additive manufacturing process for production of functional fiber-reinforced polymer composite structures

Fabrication and Formability of Continuous Carbon Fiber Reinforced Resin Matrix Composites Using Additive Manufacturing

Parametric Study on Manufacturing of Continuous Glass Fibers Reinforced Polylactic Acid (PLA) Filaments for 3D Printing

Improving mechanical properties of continuous fiber-reinforced thermoplastic composites produced by FDM 3D printer

3D printing of a continuous fiber-reinforced composite based on a coaxial Kevlar/PLA filament

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites

Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing

Effect of Short Glass Fiber Addition on Flexural and Impact Behavior of 3D Printed Polymer Composites