Abstract:3D printing of continuous carbon fiber reinforced thermoplastic (CFRTP) composites is increasingly under development owing to its unparalleled flexibility of manufacturing 3D structures over traditional manufacturing processes. However, key issues, such as weak interlayer bonding, voids between beads and layers, and low volume ratio of carbon fiber, in the mainstream fuse deposition modeling (FDM) and extrusion suppress the applications of these techniques in mission‐critical applications, such as aerospace and defense. This communication reports a novel approach, inspired by laminated object manufacturing (LOM), for 3D printing of continuous CFRTPs using prepreg composite sheets. The prepreg sheets are successively cut based on the sliced CAD geometry, and then bonded layer upon layer using a CO2 laser beam and a consolidation roller system. The void content is low by computed tomography scans and interlaminar bonding strength is as high as conventional autoclave method by lap shear strength tests. The excellent interfacial bonding strength and high volume ratio of continuous carbon fiber contribute to the highest reported tensile strength (668.3 MPa) and flexural strength (591.16 MPa) to date, for all 3D printed CFRTPs. Moreover, the proposed technique also enables controlling the alignment of carbon fiber in printed layers. CFRTPs with unidirectional [0°]s, cross‐ply [0/90°]s, and [0/‐45/0/45°]s fiber reinforcement are produced and evaluated for mechanical properties. The proposed 3D printing method is broadly beneficial for industries requiring high performance and lightweight structural materials with complex geometries. A mechanism to 3D print ultrahigh strength carbon fiber reinforced polymer (CFRP) composites capable of achieving aligned continuous carbon fiber reinforcement is presented. The mechanical properties are superior to the existing 3D printed CFRP materials due to an excellent interfacial bonding and minimal void content. During this laser assisted 3D printing technique, temperature at the material interface reaches well above the matrix melting point.

Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

3D Printing for High Performance Fiber Reinforced Polymer Composites

Carbon Fiber-Thermoplastic Composite 3D Printing Technology and Its Self-Monitoring

Process parameters and mechanical properties of continuous glass fiber reinforced composites-polylactic acid by fused deposition modeling

Manufacturing and 3D printing of continuous carbon fiber prepreg filament

Preparation and characterization of 3D printed continuous carbon fiber reinforced thermosetting composites

High-content continuous carbon fiber reinforced multifunctional prepreg filaments suitable for direct 3D-printing

3D printing of a continuous fiber-reinforced composite based on a coaxial Kevlar/PLA filament

Fabrication and Formability of Continuous Carbon Fiber Reinforced Resin Matrix Composites Using Additive Manufacturing

3D Printing of Ultrahigh Strength Continuous Carbon Fiber Composites

Selectively Enhanced 3D Printing Process and Performance Analysis of Continuous Carbon Fiber Composite Material

Effect of Process Parameters on Tensile Mechanical Properties of 3D Printing Continuous Carbon Fiber-Reinforced PLA Composites

3D printing for continuous fiber reinforced thermoplastic composites: mechanism and performance

Investigation on process parameters of 3D printed continuous carbon fiber-reinforced thermosetting epoxy composites

Direct-write 3D printing of UV-curable composites with continuous carbon fiber

An investigation of preparation of continuous carbon fiber reinforced PLA prepreg filament

Investigation on the mechanical properties of 3D printed hybrid continuous fiber-filled composite considering influence of interfaces

Investigation of a 3D Printing Method for Continuous Carbon Fiber-Reinforced Thermosetting Epoxy Composite

Three-Dimensional Printing of Continuous Flax Fiber-Reinforced Thermoplastic Composites by Five-Axis Machine