Progressive Collapse and Post Impact Damage Assessment in a Regular Beam-Slab Building & Flat-Slab Building on the Intermediate Floor
Chinmay Achpal,R. S. Shekhawat,Trilok Gupta
DOI: https://doi.org/10.9734/jsrr/2024/v30i82224
2024-07-15
Journal of Scientific Research and Reports
Abstract:Progressive collapse, where a localized member failure causes widespread structural collapse, has become a critical concern nowadays, due to its potential to cause significant financial losses and loss of human life. Triggers include natural disasters like earthquakes and floods, as well as accidents, attacks and explosions. Reinforced concrete flat slab structures, which are eminent for their architectural flexibility and have larger spans, are particularly susceptible to disproportionate collapse, due to the lack of floor beams, which can redistribute loads after a column failure, unlike moment frame buildings. This research examines how multi-story reinforced concrete flat slab buildings behave, under prescribed gravity load combinations, compared to conventional framed buildings. The effects of removing columns at specified locations from an intermediate floor of the multistorey building are also examined. However, this investigation covers both the column removal approaches to check a possibility of disproportionate collapse which are; static removal and dynamic instantaneous removal. Furthermore, the research also assesses the efficacy of perimeter beams, in minimising the risk of gradual collapse in flat slab structures, by scrutinising their ability to reduce joint displacement, chord rotation, and demand capacity ratio.
ETABS v18 was used to analyze all the 18 models. The findings revealed that buildings are more prone to progressive collapse when corner columns are removed, as opposed to edge and interior columns, due to higher Demand-Capacity Ratios (DCR) and joint displacement. In comparison to dynamic analysis, the static evaluation exhibited greater DCR values and vertical joint displacement. Furthermore, since they have a more efficient load redistribution mechanism, traditional framed structures performed better than flat slab models. The simulations additionally indicated that, adding edge perimeter beams, substantially lowered the possibility of progressive collapse in flat slab structures. Moreover, the tested flat slab building models, with and without perimeter beams showed no indications of progressive collapse, when specified columns were removed from the intermediate floors, since the DCR values of the crucial columns stayed within the permissible range of 2.0. In conclusion, structures built in compliance with IS 1893:2016 code and designed to withstand seismic loads demonstrate stronger resistance against significant damage, brought about by column failures.