Abstract:Here, a unique combination of a novel carbon-nitrogen source (g-C3N4) with different mole ratios of Ti/g-C3N4 has been utilized to fabricate iron matrix composite coatings by a synchronized powder feeding plasma transferred arc (PTA) cladding technology. The results show that submicron Ti(C,N) particles are successfully fabricated in situ on a Q235 low carbon steel substrate to reinforce the iron matrix composite coatings and exhibit dense microstructures and good metallurgical bonding between the coating and the substrate. The microstructure of the coating consists of an -Fe matrix and Ti(C,N) particles when the mole ratio of Ti/g-C3N4 is no more than 5:1. The microhardness and wear resistance of the coating gradually improve with increasing abundance of the in situ synthesized Ti(C,N) particles. Interestingly, for a Ti/g-C3N4 mole ratio of 6:1, a fine lamellar eutectic Laves phase (Fe2Ti) appears, and this phase further improves the microhardness and wear resistance of the coating. The microhardness of the coating is 3.5 times greater than that of the Q235 substrate, and the wear resistance is enhanced 7.66 times over that of the substrate. The Ti(C,N)/Fe2Ti and Fe2Ti/-Fe interfaces are very clean, and the crystallographic orientation relationships between the phases are analyzed by high-resolution transmission electron microscopy (HRTEM) and an edge-to-edge matching model. The theoretical predictions and the experimental results are in good agreement. Furthermore, based on the present study, for the solidification process near equilibrium, smaller interatomic spacing misfits and interplanar spacing d-value mismatches contribute to the formation of crystallographic orientation relationships between phases during the PTA cladding process. The existence of orientation relationships is beneficial for improving the properties of the coatings. This work not only expands the application fields of g-C3N4 but also provides a new idea for the preparation of Ti(C,N) particle-reinforced composite coatings.

In situ TiC particles reinforced grey cast iron composite fabricated by laser cladding of Ni–Ti–C system

Microstructure and Wear-resistant Properties of in situ TiB-TiC Reinforced Titanium Matrix Composites by Laser Deposition Manufacturing

TiC Reinforcement Composite Coating Produced Using Graphite of the Cast Iron by Laser Cladding

Fabrication of nickel composite coatings reinforced with TiC particles by laser cladding

Synthesis of Y2O3 particle enhanced Ni/TiC composite on TC4 Ti alloy by laser cladding

In situ Ti 2 Ni/Ti 2 S reinforced Ti-based composites with enhanced mechanical properties fabricated by laser cladding on TC4 alloy

Coarse TiC particles reinforced H13 steel matrix composites produced by laser cladding

TiC particulate composite coating produced in situ by laser cladding

In situ TiC/Ti2Ni reinforced CrTi4-based composites during laser cladding

A New Design of In-situ Ti(C,N) Reinforced Composite Coatings and Their Microstructures, Interfaces and Wear Resistances.

Microstructure Characteristics and Properties of In-Situ Formed Tic/Ni Based Alloy Composite Coating by Laser Cladding

In Situ Fabrication of Titanium Carbide Particulates-Reinforced Iron Matrix Composites

Design, fabrication, microstructure and properties of in-situ synthesized TiC reinforced stainless steel matrix composite coating by laser cladding

TiC reinforced composite coating produced by powder feeding laser cladding

Microstructure and high-temperature wear properties of in situ TiC composite coatings by plasma transferred arc surface alloying on gray cast iron

Microstructure and element distribution of laser cladding TiC -reinforced CrTi4-based composite coating with CeO2/Ce2O3

Abrasive wear characteristics of in-situ TiC-reinforced iron matrix surface gradient composites

Study on in Situ Synthesis of TiC Particle Reinforced Iron Matrix Composite

Microstructure Evolution of TiC Particles In Situ, Synthesized by Laser Cladding

Abrasive wear properties of titanium carbide particle bundle reinforced iron matrix composite prepared by in-situ synthesis

The Effect of TiC-Fe3C on the Wear Resistance of Laser Cladding Layers in Grey Iron