Abstract:To improve the applicable performance of the engine and accomplish the determination of optimization, the crankshaft, as one of its essential components, is optimized based on experimental design and response surface method (RSM). First, the static analysis of the crankshaft is carried out. Over the solution, the maximum equivalent stress and deformation distribution of the crankshaft and the area with the most concentrated stress are obtained to provide the direction for subsequent optimization. Then the modal analysis is carried out to define the portions with large amplitude to prevent resonance. At the same time, based on the modal analysis results, the harmonic response of the crankshaft is examined to ensure that the crankshaft can avoid resonance and fatigue caused by forced vibration at different engine speeds. It also provides a theoretical basis for the further optimization design of the crankshaft. Then, through the experimental design and response surface optimization analysis, the optimization purpose of reducing the maximum equivalent stress, maximum deformation, and lightweight of the crankshaft is accomplished. Through the design expert software, the response surface model and fitting equation of the crankshaft are solved by the RSM, which provides a reference basis for optimizing the crankshaft. Finally, according to the optimization scheme, the crankshaft is reconstructed, and the optimized crankshaft model is compared with the original model. After optimization, the maximum equivalent stress is reduced by 9.43%, the maximum deformation is reduced by 3.68%, and the mass is reduced by 1.30%. At the same time, the first three natural frequencies are reduced by 10.28, 10.28, and 10.34%, which achieves the purpose of optimizing the crankshaft design. The research results provide effective theory and evidence for the structural design of the crankshaft.

Analysis of Fatigue Performance and Parameter Optimization of Single-turn Crankshaft of Submersible Diaphragm Pump

An Effective Method for Improving the Lifetime of Double Acting Vane Pump

Multi-objective Optimization Design of Sliding Bearing of High-speed Centrifugal Pump Based on Lubrication Characteristics Analysis

Hydraulic Optimization of Super-low Specific Speed Multistage Flameproof Submersible Pump with Inner Motor for Coal Mine

Strength Analysis and Structure Optimization of the Crankshaft of an Opposed-Power Reciprocating Pump

Modeling and Optimization for Submersible Pump Tubular Linear Motor Based on Dynamic Load Analysis

Optimizing Multi-Row Cam Roller Bearing for Long Fatigue Life of Hydraulic Motors

Study on the Dynamic Load and Mechanical Property of the Plunger Pump Crankshaft

Investigation on Structural Optimization of Anti-Overturning Slipper of Axial Piston Pump

Analysis and Optimization on U-shaped Damping Groove for Flow Ripple Reduction of Fixed Displacement Axial-Piston Pump

The Optimization of Bellows Convolutions in Bellows Pump for Better Stress Distribution

The Development of a Fillet Design Tool Based on Light-Weight Marine Diesel Engine Crankshafts

Flow Ripple Reduction of Axial-Piston Pump by Structure Optimizing of Outlet Triangular Damping Groove

Optimization Design Of The Inner Radius Of The Sealing Surface Of Slipper

Modeling and Analysis of the Churning Losses Characteristics of Swash Plate Axial Piston Pump

Crankshaft Optimization Based on Experimental Design and Response Surface Method

Optimization of Cross Angle Based on the Pumping Dynamics Model

Optimization of a Centrifugal Pump to Improve Hydraulic Efficiency and Reduce Hydro-Induced Vibration

Research on Multi-Objective Optimization of Low Pulsation Unloading Damping Groove of Axial Piston Pump

Optimization of low-temperature multi-stage submersible pump based on blade load

Multi-objective Optimization of Micron-Scale Surface Textures for the Cylinder/valve Plate Interface in Axial Piston Pumps