Abstract:The additive manufacturing method based on computer-aided design and three-dimensional printing technology, its speed, design freedom provided for the designers, the cost-effectiveness and competitive for relatively low-capacity production needs, the possibilities of achieving good quality; has been gained a popularity with the industries, including the maritime sector. The main proof of this interest is the significant increase in the number of research and development activities and scientific publications on this topic. Due to above mentioned advantages, it is inevitable for the small-marine craft industry, whose competitiveness can be made sustainable by frequently updating flexible designs, to adopt their technology to the additive manufacturing method. While it makes the design and manufacturing process of boats efficient, for getting more effective results; it requires past driven data approach on practical experience. In this study, the effect of infill density and pattern which are important parameters of the additive manufacturing method, on the tensile strength of the final product's basic mechanical properties was investigated experimentally. Tensile tests with 13 different printing pattern and 5 different infill density of polylactic acid (PLA), one of the polymers widely used based on three-dimensional printing technologies, and a test matrix consisting of five different filling densities as 10%, 25%, 50%, 75% and 100%, were performed in Dokuz Eylul University’s (DEU) Composite Laboratory. The results showed that the mechanical properties were very sensitive to these parameters, and the cubic pattern was generally effective in achieving the best mechanical properties at the investigated densities. Using this pattern and 25% density, sailboat hull with 1/5 scale was produced in DEU Institute of Marine Sciences and Technologies Additive Manufacturing Laboratory, using PLA polymer by additive manufacturing.

Biodegradable 3D printed polylactic acid structures for different engineering applications: effect of infill pattern and density

Crashworthiness Characteristics of Bio-inspired 3D-Printed Tubes: A Lesson from the Environment

A study of crashworthiness performance in thin‐walled multi‐cell tubes 3D‐printed from different polymers

Effect of infill pattern of polylactide acid (PLA) 3D-printed integral sandwich panels under ballistic impact loading

Effect of the Infill Density on 3D-Printed Geometrically Graded Impact Attenuators

On crashworthiness behaviors of 3D printed multi-cell filled thin-walled structures

The effects of infill density and pattern on the strength of marine small craft building by additive manufacturing method

Multi-objective numerical optimization of 3D-printed polylactic acid bio-metamaterial based on topology, filling pattern, and infill density via fatigue lifetime and mass

Picking Up the Optimum Triggering Combinations of Crashworthy 3D-Printed Sustainable Structures: An Experimental Study in Al-Kharj Governorate, KSA

Maximizing performance and efficiency in 3D printing of polylactic acid biomaterials: Unveiling of microstructural morphology, and implications of process parameters and modeling of the mechanical strength, surface roughness, print time, and print energy for fused filament fabricated (FFF) bioparts

Infill pattern and density effects on the tensile properties of 3D printed PLA material

Mechanical Properties of 3D Printed Polylactic Acid Product for Various Infill Design Parameters: A Review

Modeling of Effect of Infill Density Percentage on Rotating Bending Fatigue Behavior of Additive-Manufactured PLA Polymers

Advanced Infill Designs for 3D Printed Shape-Memory Components

Impact of 3D printing parameters on static and fatigue properties of polylactic acid (PLA) bone scaffolds

Effect of Infill Density and Printing Patterns on Compressive Strength of ABS, PLA, PLA-CF Materials for FDM 3D Printing

Effect of Degradation of Polylactic Acid (PLA) on Dynamic Mechanical Response of 3D Printed Lattice Structures

An Investigation of Tensile, Fatigue, and Fracture Behavior of 3D-Printed Polymers

Experimental Analysis and Design of 3D-Printed Polymer Elliptical Tubes in Compression

Analysis of manufacturing and material parameters in 3D-printed polylactic acid (PLA) parts filled with glass powder: mechanical, economic, and environmental assessment

The effect of processing parameters on the mechanical characteristics of PLA produced by a 3D FFF printer