Abstract:A magnetic field measurement with enhanced sensitivity based on the Vernier effect of a dual-loop optoelectronic oscillator (OEO) using a cascaded giant magnetostrictive material-fiber Bragg grating (GMM-FBG) and Monel-400-fiber Bragg grating (Monel-400-FBG) is proposed and experimentally demonstrated. The OEO loop incorporates two reflected signals from the dual FBGs, serving as separate light sources injected into two paths with distinct fiber lengths. The dispersion introduced in the loop allows the wavelength shift of the GMM-FBG to be translated into a frequency shift of the microwave signal within the OEO cavity. As the GMM-FBG's central wavelength shifts with the magnetic field variation, the change of the monitoring OEO frequency enables precise measurement of magnetic field information. Diverging from conventional single-loop configurations, the proposed OEO generates the Vernier effect due to the length disparity between the two loops. Consequently, by monitoring the frequency variations in the envelope of the OEO's micro-wave signal, the sensitivity scale factor for sensing information is significantly enhanced. Experimental findings reveal a magnetic field sensitivity of approximately 201 Hz/mT for the single loop, increasing to 8 kHz/mT with the application of the Vernier effect, which represents a 40-fold improvement. Furthermore, a Monel-400 alloy hosts the reference FBG, possessing a similar thermal expansion coefficient to GMM. This design mitigates temperature crosstalk in magnetic field measurements. Compared to utilizing an unprocessed reference FBG, the magnetic field error induced by temperature is reduced from 2.46 to 0.06 mT. Additionally, flexible sensitivity scale factors can be achieved by designing the varied path length differences. Experimental results demonstrate magnetic field sensitivities of 12.7 and 21.9 kHz/mT, with increases of 64 and 109 times, respectively.

Structural Optimization and Temperature Compensation of GMM-FBG Fiber Current Transducer

Research on temperature controlling for GMA based on direct liquid cooling

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Fiber Optic Fabry-Perot Magnetic Field Sensor with Temperature Compensation Using a Fiber Bragg Grating

A Sensitivity Difference Approach to Overcome Temperature Influence on a Fiber Optic Force Sensor with a Pair of FBGs

The Improvement of Temperature Sensitivity by Eliminating the Thermal Stress at the Interface of Fiber Bragg Gratings

Temperature Compensation of Optical Fiber Current Sensors With a Static Bias

Temperature compensated magnetic field sensor based on magnetic fluid infiltrated cascaded structure of micro-tapered long-period fiber grating and fiber Bragg grating

Model and Experimental Study on Optical Fiber CT Based on Terfenol-D

High sensitivity high precision MMFBG based on waist-enlarged bitaper for temperature measurement

A Novel Fiberg Grating Sensing and Demodulating System with Temperature Compensation

A Sensitivity-enhanced Fiber Grating Current Sensor Based on Giant Magnetostrictive Material for Large-Current Measurement

Cantilever vibration sensor based on Fiber Bragg Grating temperature compensation

Magnetic Field Measurement With Improved Scale Factor Based on a Dual-Loop Optoelectronic Oscillator With Vernier Effect Using a Cascaded GMM-FBG and Monel-400-FBG

Temperature Measurements and Multi-Physical Field Simulations of Micro-Sized Metal Film Bridge

Simultaneous Detection of Magnetic Field and Temperature Using Micro-Nanofiber Cascaded Fiber Bragg Grating Structure

Research on sensitized Fiber Bragg Grating temperature sensor based on bimetal three-substrates

Simultaneous strain and temperature measurement by cascading few-mode fiber and single-mode fiber long-period fiber gratings

Capillary Encapsulating of Fiber Bragg Grating and the Associated Sensing Model

Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop

Monitoring Junction Temperature of RF MOSFET under Its Working Condition Using Fiber Bragg Grating