Segment Thickness Design and Bearing Performance Analysis of Large Inner-Diameter Shield Tunnel under Lateral Unloading
Cirong Lu,Changbao Liu,Xiaohui Zhang
DOI: https://doi.org/10.3390/app132111871
2023-10-30
Applied Sciences
Abstract:In order to accommodate more transportation-supporting facilities, the expansion of structures’ inner diameter has become the development trend of metro shield tunnels. But for large inner-diameter shield tunnels, the segment thickness design and bearing performance characteristics of tunnels under lateral unloading are still unclear. The purpose of the research was to select the optimal segment thickness and clarify the bearing performance of large inner-diameter shield tunnels. Therefore, in this study, a 3D refined numerical model was established to analyze and determine the optimal segment thickness for a shield tunnel with an inner diameter of 5.9 m. Furthermore, a full-scale test was carried out to study the bearing performance of the shield tunnel under lateral unloading. The results showed that the maximum tunnel horizontal deformation difference between the calculation and the test did not exceed 5%, and the maximum difference in the overall structure deformation between the calculation and the test did not exceed 7%. Increasing the segment thickness can reduce the convergence deformation of the shield tunnel nonlinearly; the deformation reduction was no longer significant when the segment thickness increased to 400 mm with an inner diameter of 5.9 m. Under the lateral unloading condition, the internal force of the tunnel structure increased significantly at sections of 0°, 55°, 125°, and 190°. Compared with the normal design load stage, the maximum bending moment and axial force increased by 36% and 74.1%, respectively, in the final failure stage. There was no bolt yield during the entire unloading process, indicating that the excessive strength of the bolt could not fully play a role in the entire life cycle of the large inner-diameter tunnel structure. The failure mechanism of the shield tunnel can be described as follows: in the early stage of a load, a shield tunnel will appear with joints open and dislocated. As the load increases, cracks in different directions gradually appear near the tunnel joint. In the ultimate load stage, the shield tunnel loses load-bearing capacity, and large areas of falling blocks appear at the top and bottom of the tunnel.
materials science, multidisciplinary,engineering,chemistry,physics, applied