Abstract:Ce-modified Mn-Fe mixed-oxide catalysts were prepared by a citric acid sol-gel method and characterized by X-ray diffraction, Raman, N-2 adsorption-desorption, infrared spectra, H-2 temperature-programmed reduction and thermogravimetric analyses. Their catalytic properties were investigated in ozone (O-3) decomposition reaction. Results show that the small amount of rare earth metal Ce added during Mn-Fe (FM) mixed-oxide synthesis greatly improves the catalytic performance in O-3 decomposition. Among the prepared catalysts, the C-0.04(FM)(0.96) mixed-oxide catalyst exhibits the highest catalytic activity and stability. The O-3 conversion over C-0.04(FM)(0.96 )is 98% after 24 h reaction at 25 degrees C under dry condition, and that over FM decreases to 90% after 16 h reaction. At 0 degrees C, the O-3 conversion over Ca-0.04(FM)(0.96) is 95% after 7 h reaction under dry condition, and that over FM slows down to 70%. Under humid condition (RH = 65%), the O-3 conversion over C-0.04(FM)(0.96) is 63% after 6.5 h reaction at 25 degrees C, while that over FM decreases to 55%. When Ce is doped into Mn-Fe mixed oxides, the small amount of Ce enters the crystal lattice of MnO2, and partial Fe is separated to form Fe2O3. This changes cause lattice distortion and increase defects and enable the as-synthesized Ce-Fe-Mn ternary mixed-oxide catalysts to acquire additional oxygen vacancies and increase their specific surface area, thereby increasing the number of reaction sites and enhancing the catalytic performance of the catalysts for O-3 decomposition. (C) 2020 Published by Elsevier B.V. on behalf of Chinese Society of Rare Earths.

Low-temperature catalytic combustion of trichloroethylene over MnO -CeO2 mixed oxide catalysts

Low-temperature Catalytic Combustion of Trichloroethylene over MnO X -Ceo 2 Mixed Oxide Catalysts

Influence of Ce/Nb Molar Ratios on Oxygen-Rich CexNb1-xO4+δ Materials for Catalytic Combustion of VOCs in the Process of Polyether Polyol Synthesis

Low-temperature catalytic combustion of trichloroethylene over cerium oxide and catalyst deactivation

Low-Temperature Catalytic Combustion Of Trichloroethene Over Cerium Oxide

Low-temperature catalytic combustion of chlorobenzene over MnOx–CeO2 mixed oxide catalysts

Efficient Low-Temperature Catalytic Combustion of Trichloroethylene over Flower-Like Mesoporous Mn-doped CeO2 Microspheres

Low Temperature Catalytic Combustion of Chlorobenzene over Mn–Ce–O/γ-Al2O3 Mixed Oxides Catalyst

Catalytic combustion of chlorobenzene over MnOx–CeO2 mixed oxide catalysts

High Thermal Stability of Ceria-Based Mixed Oxide Catalysts Supported on ZrO2 for Toluene Combustion

Thermal Stability of MnO X – CeO 2 Mixed Oxide for Soot Combustion : Influence of Al 2 O 3 , TiO 2 , and ZrO 2 Carriers

Enhanced catalytic performance for toluene combustion via Ce-doped α-MnO2: efficient balance between toluene adsorption and activation oxidation

A mechanic insight into low-temperature catalytic combustion toward ethylene oxide over Pt-Ru/CuCeOx bimetallic catalyst

Ce–Fe–Mn Ternary Mixed-Oxide Catalysts for Catalytic Decomposition of Ozone at Ambient Temperatures

Enhanced catalytic oxidation of diluted ethylene oxide on Pt/CeO<sub>2</sub> catalyst under low temperature

Operando Investigation of Catalytic Trichloroethylene Combustion Via Metal-Doped CeO2 Nanorods

Promoting Effect of Zro2 Carrier on Activity and Thermal Stability of Ceo2-Based Oxides Catalysts for Toluene Combustion

Catalytic Combustion of Chlorobenzene over Mn-Ce-La-O Mixed Oxide Catalysts.

Low-Temperature Catalytic Combustion of Trichloroethylene over La, Ce, and Pt Catalysts Supported on MCM-41

Transition Metal Doping Effect and High Catalytic Activity of CeO2–TiO2 for Chlorinated VOCs Degradation

The Remarkable Oxidation of Trichloroethylene in a Post-Plasma-catalytic System over Ag-Mn-Ce/HZSM-5 Catalysts