Abstract:Highlights • The FSW parameters are the primary factor for controlling the dissimilar Mg/Al joint quality. • The use of the Zn interlayer is found to be significantly effective in enhancing the dissimilar Mg/Al joint quality. • The main effect of the Zn interlayer in enhancing the Mg/Al joint quality is based on metallurgical bonding rather than mechanical interlocking. • EAFSW gave promising results in improved tensile strength and elimination of defects of Mg/Al joints. • The submerged FSW (SFSW) effectively controls heat generation. Magnesium and aluminum alloys continually attract interest as lightweight structural materials for transport applications. However, joining these dissimilar alloys is very challenging. The main obstacle that hinders progress in dissimilar Mg-Al joining is the formation of brittle intermetallic compounds (IMCs). As a solid-state joining technique, FSW is an excellent candidate to attenuate the deleterious IMC effects in dissimilar Al-Mg joining due to the inherent low heat inputs involved in the process. However, the IMCs, namely Al 3 Mg 2 and Al 12 Mg 17 phases, have also been reported to form during Al-Mg dissimilar FSW; their amount and thickness depend on the heat input involved; thus, the weld parameters used. Since the heat dissipated in the material during the welding process significantly affects the amount of IMCs, the heat input during FSW should be kept as low as possible to control and reduce the amount of IMCs. This review aims to critically discuss and evaluate the studies conducted in the dissimilar Al/Mg FSW through a scientometric analysis and also with a focus on the strategies recently applied to enhance joint quality. The scientometric analysis showed that the main research directions in Mg/Al FSW are the technological weldability of aluminum and magnesium during FSW, structural morphology, and mechanical properties of dissimilar welded joints. Considering the scope of application of the aforementioned joints, the low share of articles dealing with environmental degradation and operational cracking is surprising. This might be attributed to the need for well-developed strategies for obtaining high-quality and sustainable joints for applications. Thus, the second part of this review is conventional, focusing mainly on the new strategies for obtaining high-quality Mg/Al joints. It can be concluded that in addition to the necessity to optimum welding parameters to suppress the excessive heat to limit the amount and thickness of IMC formed and improve the overall joint quality, strategies such as using Zn interlayer, electric current assisted FSW(EAFSW), ultrasonic vibration FSW (UVaFSW), are considered effective in the elimination, reduction, and fragmentation of the brittle IMCs.

Corrosion and protection of friction stir welding of magnesium alloy

Microstructure, mechanical and corrosion behaviours in friction stir welding of dissimilar magnesium alloys

Improved corrosion resistance of friction stir welded magnesium alloy with micro-arc oxidation/electroless plating duplex coating

Strengthening mechanism and corrosion behavior of friction stir welded LAZ933 magnesium-lithium alloy

Effect of Alloying Foil on the Friction Stir Weld Quality of Mg Alloy Joints

Corrosion behaviour of friction stir welded rare earth magnesium alloy ZE41 under salt spray test

Effect of Traverse Speed Variation on Microstructural Properties and Corrosion Behavior of Friction Stir Welded WE43 Mg Alloy Joints

Microstructure, MAO Performance, Interfacial Characteristics and Corrosion Behavior of FSW Joint of Al-Mg-Sc Alloy

Friction Stir Welding of Magnesium Alloys: A Review

Friction stir welding of aluminium to magnesium: a critical review

Improving the corrosion resistance of friction stir welding joint of 7050 Al alloy via optimizing the process route

Precipitation-dependent corrosion analysis of heat treatable aluminum alloys via friction stir welding, a review

Microstructure, properties and natural ageing behavior of friction stir welded dual-phase Mg-Li alloy

Developments in friction stir welding of aluminium to magnesium alloy

A review on friction stir butt welding of aluminum with magnesium: A new insight on joining mechanisms by interfacial enhancement

A critical review on mechanical and microstructural properties of dissimilar aluminum (Al)-magnesium (Mg) alloys

A Review on Dissimilar Friction-stir Welding between Aluminum Alloys and Magnesium Alloys

Review on friction stir welding of dissimilar magnesium and aluminum alloys: Scientometric analysis and strategies for achieving high-quality joints

Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties

Corrosion and Protection of Magnesium Alloys: Recent Advances and Future Perspectives

Macro-galvanic Effect and Its Influence on Corrosion Behaviors of Friction Stir Welding Joint of 7050-T76 Al Alloy