Abstract:Alkyl-substituted dibenzothiophenes such as 4,6-dimethyldibenzothiophene are a kind of typical refractory sulfur compound in fuel oil. Herein, three-dimensional ordered macro–mesoporous (3DOM) tungsten oxide catalysts were successfully prepared for aerobic oxidative desulfurization of 4,6-dimethyldibenzothiophene. The experimental results indicated that the as-prepared material 3DOM WOx-400 not only contained a hexagonal packed nanoporous structure but also abundant oxygen defects on its skeleton, exhibiting aerobic oxidative desulfurization of over 99% in 4 h. Moreover, sulfur removal could still reach 99% after recycling five times. Through free radical capture experiments, the superoxide radical is reasonably proposed in the mechanism. This work would provide a feasible route to develop highly efficient nanoporous materials for desulfurization of fuels.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c02639?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c02639</a>.TGA profiles of the precursor with PMMA (A) and without PMMA (B) (Figure S1); FT-IR spectra of the precursor mixture at different calcination stages (Figure S2); SEM image of the PMMA sphere alloy as the template (Figure S3); macropore diameter distribution of 3DOM WOx-400 (Figure S4); Raman spectrum of commercial WO3 (Figure S5); XPS full-scan spectra of various samples (Figure S6); comparison on W 4f peaks of 3DOM WOx-400 and WOx-400 (Figure S7); W 4f core-level of 3DOM WOx-300 and 3DOM WOx-500 (Figure S8); EPR spectra of various samples (Figure S9); effect of the reaction temperature on sulfur removal in the desulfurization system (Figure S10); GC–MS analysis for the extractant of the catalyst phase after the reaction (Figure S11); SEM images of recycled 3DOM WOx-400 (Figure S12); FT-IR spectra of fresh and recycled 3DOM WOx-400 (Figure S13) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c02639/suppl_file/an0c02639_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Design and Synthesis of Amphiphilic Catalyst [C 16 mim] 5 VW 12 O 40 Br and Its Application in Deep Desulfurization with Superior Cyclability at Room Temperature

In Situ Synthesis of Nb-modified AFI Topology Molecular Sieve and Its Modulation on the Formantion of High-Efficiency Catalyst for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Role of the Solvent Evaporating Temperature on the NiMo/TiO2-Al2O3 Catalyst and the Hydrodesulfurization Performance for 4,6-Dimenthyldibenzothiophehe

Synthesis of Novel NiMo Catalysts Supported on Highly Ordered TiO2-Al2O3 Composites and Their Superior Catalytic Performance for 4,6-Dimethyldibenzothiophene Hydrodesulfurization

Design and preparation of polyoxometalate-based catalyst [MIMPs]3PMo6W6O40 and its application in deep oxidative desulfurization with excellent recycle performance and low molar O/S ratio

Chemical Oxidation of Dibenzothiophene with a Directly Combined Amphiphilic Catalyst for Deep Desulfurization

Efficient Diesel Desulfurization by Novel Amphiphilic Polyoxometalate-Based Hybrid Catalyst at Room Temperature

Tungstovanadate-Based Ionic Liquid Catalyst [C 2 (MIM) 2 ] 2 VW 12 O 40 Used in Deep Desulfurization for Ultraclean Fuel with Simultaneous Recovery of the Sulfone Product

One-step synthesis of supported green catalyst by thermal polymerization and application of model oil desulfurization

Preparation of methylimidazole hydrochloride/oxalic acid type deep eutectic solvent and its application in oxidative desulfurization of model oil

Aerobic Oxidative Desulfurization by Nanoporous Tungsten Oxide with Oxygen Defects

Construction of large-aperture mesoporous silica spheres supported polyoxometalate heterogeneous catalysts and their high-efficiency for the ultra-deep desulfurization

Catalysts Based on Acidic SBA-15 for Deep Oxidative Desulfurization of Model Fuels

Electronic state tuning over Mo-doped W18O49 ultrathin nanowires with enhanced molecular oxygen activation for desulfurization

Construction of amphiphilic and polyoxometalate poly(ionic liquids) for enhanced oxidative desulfurization in fuel

Optimization of Composition of a Directly Combined Catalyst in Dibenzothiophene Oxidation for Deep Desulfurization

In situ bridging encapsulation of a carboxyl-functionalized phosphotungstic acid ionic liquid in UiO-66: A remarkable catalyst for oxidative desulfurization

Preparation of Bi2WO6 and Its Ultra-Deep Oxidative Desulfurization Performance in Ionic Liquids

Polyoxometalate-Organic Hybrid Molecules As Amphiphilic Emulsion Catalysts for Deep Desulfurization

Preparation of MoO 2 /g-C 3 N 4 Composites with a high surface area and its Application in Deep Desulfurization from Model Oil

Polycrystalline Phase WO3/g-C3N4 As a High Efficient Catalyst for Removal of DBT in Model Oil