Abstract:Purpose: One of the major reasons that totally implantable cochlear microphones are not readily available is the lack of good implantable microphones. An implantable microphone has the potential to provide a range of benefits over external microphones for cochlear implant users including the filtering ability of the outer ear, cosmetics, and usability in all situations. This paper presents results from experiments in human cadaveric ears of a piezofilm microphone concept under development as a possible component of a future implantable microphone system for use with cochlear implants. This microphone is referred to here as a drum microphone (DrumMic) that senses the robust and predictable motion of the umbo, the tip of the malleus. Methods: The performance was measured of five DrumMics inserted in four different human cadaveric temporal bones. Sensitivity, linearity, bandwidth, and equivalent input noise were measured during these experiments using a sound stimulus and measurement setup. Results: The sensitivity of the DrumMics was found to be tightly clustered across different microphones and ears despite differences in umbo and middle ear anatomy. The DrumMics were shown to behave linearly across a large dynamic range (46 dB SPL to 100 dB SPL) across a wide bandwidth (100 Hz to 8 kHz). The equivalent input noise (0.1-10 kHz) of the DrumMic and amplifier referenced to the ear canal was measured to be 54 dB SPL and estimated to be 46 dB SPL after accounting for the pressure gain of the outer ear. Conclusion: The results demonstrate that the DrumMic behaves robustly across ears and fabrication. The equivalent input noise performance was shown to approach that of commercial hearing aid microphones. To advance this demonstration of the DrumMic concept to a future prototype implantable in humans, work on encapsulation, biocompatibility, connectorization will be required.

Piezoelectric Multi‐Channel Bilayer Transducer for Sensing and Filtering Ossicular Vibration

Thin-Film PZT-Based Multi-Channel Acoustic MEMS Transducer for Cochlear Implant Applications

Sensitivity And Fidelity Of A Novel Piezoelectric Middle Ear Transducer

The Frequency Response of A Floating Piezoelectric Microphone for the Implantable Middle Ear Microphone

A New Floating Piezoelectric Microphone for Fully Implantable Cochlear Implants in Middle Ear.

Spiral-Shaped Piezoelectric MEMS Cantilever Array for Fully Implantable Hearing Systems

Design of a floating mass type piezoelectric transducer for use in implantable middle ear hearing aid

Concept and Evaluation of a New Piezoelectric Transducer for an Implantable Middle Ear Hearing Device

Feasible pickup from intact ossicular chain with floating piezoelectric microphone

On the design of a MEMS piezoelectric accelerometer coupled to the middle ear as an implantable sensor for hearing devices

An Implantable Piezofilm Middle Ear Microphone: Performance in Human Cadaveric Temporal Bones

A full-custom fully implantable cochlear implant system validated in vivo with an animal model

An Incus-Body Driving Type Piezoelectric Middle Ear Implant Design and Evaluation in 3D Computational Model and Temporal Bone.

The UmboMic: A PVDF Cantilever Microphone

New perspectives for piezoelectric material-based cochlear implants: getting to nano

A piezoelectric micro-electromechanical microphone for implantable hearing aid applications

A piezoelectric transducer for bone conduction implants designed using finite element analysis

A new floating piezoelectric microphone for the implantable middle ear microphone in experimental studies.

Design Study of a Round Window Piezoelectric Transducer for Active Middle Ear Implants

INTRACOCHLEAR ELECTRIC AND ACOUSTIC STIMULATOR PROTOTYPE: AN IMPLANTABLE SOLUTION TO THE HYBRID COCHLEAR IMPLANT