Abstract:A milling force measurement tool system is designed with an elastic beam structure, which is divided into a two-end ring hoop compression sensor mode and a two-end square hoop compression sensor mode to improve the strain sensitivity. A simplified mechanical model of the elastic beam is established, and the relationship between the strain and force of the elastic beam under the action of three cutting force components is investigated, which can act a guide for subsequent milling force measurement tool system calibration tests. Thin-film strain sensors occupy a central position in the milling force measurement tool system, which consists of a substrate, transition layer, insulating layer and resistance grid layer. The resistance grid layer has a particularly significant effect on the thin-film strain sensor's performance. In order to further improve the sensitivity of thin-film strain sensors, the shapes of the substrate, the transition layer, the insulating layer and the resistance grid layer are optimized and studied. A new thin-film strain sensor is designed with a resistance grid beam constructed from an insulating layer and a resistive grid layer double-end-supported on the transition layer. The flow of the wet-etching process of thin-film strain sensors is studied and samples are obtained. The surface microforms of the sensor samples are observed by extended depth-of-field microscopy, confocal microscopy and atomic force microscopy. It can be seen that the boundary of the resistance grid layer pattern is tidy and has high dimensional accuracy, thus enabling the basic achievement of the expected effect of the design. The electrical performance of the samples is tested on an experimental platform that we built, and the results show that the resistive sensitivity coefficient of the samples is increased by about 20%, to 51.2%, compared with that of the flat thin-film strain sensor, which fulfils the design's requirements.

Optimal Design of a Six-Dimensional Force Sensor with Three-Beam Structure

Structural design of six-dimensional force sensor elastomer based on composite beam

Design of a Novel Cross Beam Six-Dimensional Force Sensor

Optimal design of multi-axis force strain sensor

Design and Optimization of Elastic Structure of Miniature Six-Dimensional Force/Torque Sensor

Design and Investigation into the Beam Structures for Improving Cross-beam Multi-axis Force Sensing Performance.

Design and optimization of a novel six-axis force/torque sensor with good isotropy and high sensitivity

Strain Analysis of Six-axis Force/Torque Sensors with Y-shaped Crossbeam

Design and Fabrication of a Miniature Four-Axial Piezoresistive Force/Torque Sensor with MEMS Technology

Design Of A Three-Component Force Sensor Based On Mems Strain Gauges

Stiffness analysis and parameter optimization of six-dimensional force sensor with the novel circular flexible spherical joint

Optimizing Design of a Force Probe with Six-Degree of Freedom

Design and analysis of parallel six-dimensional force sensor based on near-singular characteristics

Design of a novel six-axis force/torque sensor based on strain gauges by finite element method

Optimal Design of the Isotropy Performance of a Six-dimensional Force Sensor Based on a Generalized Gough-Stewart Structure Lying on a Pair of Circular Hyperboloids

Design and optimization of a novel six-axis force/torque sensor for space robot

A Novel Six-Axis Heavy Force Sensor

Optimizations of structure stiffnesses and sensitivities of Y-type six-axis force/torque sensor

Structural Design and Static Calibration of Six-axis Force/Torque Sensor

Structural Design and Optimization of the Milling Force Measurement Tool System Embedded with Thin-Film Strain Sensors

Design and experiment of a parallel six-axis heavy force sensor based on stewart structure