Abstract:Using wood biomass as opposed to petroleum/fossil feedstock to synthesize chemicals and monomers offers the value proposition of a reduced carbon foot print. A critical step in biomass utilization is to obtain the fermentable monomeric pentose and hexose sugar subunits from various lig-nocellulosic polymers. However, lignin is a three-dimensional amorphous polymer based on methoxylated phenylpropanoid units, and is crosslinks to different polysaccharides with covalent bond. The presence of lignin is a barrier to enzymatic hydrosis of cellulose by cellulases, as well as inhibiting fermentation to form products such as ethanol. Usually, there are three approaches to fractionate biomass into useful chemicals. The first one is extract lignin at high temperature and pressure. The second approach involves more severe conditions such as the temperatures and pressures used in gasification, or use the mineral acids at elevated temperatures to liberate sugars for fermentation. The third way is dissolution of biomass using ionic liquid to extract lignin, and then re-precipitation the cellulosic residue. In this paper, we investigate the lignin extraction uses a purpose designed ionic liquid (IL) 1 -butyl-3-methylimidazolium acesulfamate [BMIM]Ace at room temperature and open atmosphere. It was synthesized from the sugar acesulfamate potassium (Ace K), and with good property of greater thermal stability, increased viscosities, and inability to dissolve crystalline cellulose. In addition, it is of low cost and nontoxic, and is expected to interact with lignin owing to its aromatic character of anion. Organic solvents were firstly used in the extraction process, which reduce the viscosity of IL and increase the lignin yield. The lignin can be obtained by using acetone as the reconstitution solvent (IL/acetone 1:3, v/v), and approximately 11.5% and 96.5% of lignin and the reconstitution cellulose-rich material have been achieved in one dissolution/reconstitution cycle by fresh IL, respectively. It was found that the presence of some organic solvents mix with IL can increase the extraction efficiency. The regenerated ionic liquid showed good retention of structure and properties. The regenerated lignin fractions exhibited large molecular weights (M-w, 3700-7810 g mol(-1)). The physicochemical properties of the extracted lignin fractions were characterized by Fourier transform infrared (FT-IR), and high-performance anion exchange chromatography (HPAEC). The reconstitution cellulose-rich material can be serving as a valuable source for enzymatic saccharification for next step. These results indicate a potential approach in further optimization of the choice of low-cost Its combined with organic solvents for the efficient utilization of the wood biomass.

Kraft lignin from Jackfruit waste as an adsorbent for the selective recovery of biobutanol from the Acetone-Butanol-Ethanol fermentation broth

Separation of biobutanol from ABE fermentation broth using lignin as adsorbent: A totally sustainable approach with effective utilization of lignocellulose

Lignin-based thermo-sensitive hydrogel for selective recovery of butanol from dilute solution

Recovery and Enrichment of Organic Acids from Kraft Black Liquor by an Adsorption-Based Process

Recovery of Kraft lignin from industrial black liquor for a sustainable production of value-added light aromatics by the tandem catalytic pyrolysis

Bacterial Transformation of Aromatic Monomers in Softwood Black Liquor

Bio-separation of value-added products from Kraft lignin: A promising two-stage lignin biorefinery via microbial electrochemical technology

Extraction and Isolation of Different Lignins from Sugarcane Bagasse Biomass and Its Subsequent Thermal Degradation to Renewable Fuels

The advanced strategy for enhancing biobutanol production and high-efficient product recovery with reduced wastewater generation

Extraction Of Lignin From Wood Biomass Using A New Ionic Liquid At Open Atmosphere

Isolation and characterisation of lignin using natural deep eutectic solvents pretreated kenaf fibre biomass

Lignin Valorization: Improving Lignin Processing in the Biorefinery

Physical and Chemical Properties of Acacia mangium Lignin Isolated from Pulp Mill Byproduct for Potential Application in Wood Composites

Enzymatic synthesis of kraft lignin-acrylate copolymers using an alkaline tolerant laccase

Insights on kraft lignin degradation in an anaerobic environment

Enzymatic Transesterification of Kraft Lignin with Long Acyl Chains in Ionic Liquids

Aqueous ethanol fractionation of softwood and hardwood kraft lignins: Impact on purity and properties

Fast Microwave-Assisted Acidolysis: a New Biorefinery Approach for the Zero-Waste Utilisation of Lignocellulosic Biomass to Produce High Quality Lignin and Fermentable Saccharides

Selective Degradation of Technically Relevant Lignin to Vanillic Acid and Protocatechuic Acid

Acetone Fractionation: a Simple and Efficient Method to Improve the Performance of Lignin for Dye Pollutant Removal

Concentrated sulfuric acid hydrolysis of softwood with t-butyl alcohol