Abstract:A microwave‐assisted method for rapid construction of conductive networks on the surfaces of 3D printed parts is proposed. The as‐prepared TPU/CNT composites can still stably convert pressure into electrical signals with high sensitivity (0.879 kPa‐1) after 200 tensile cycles. The TPU/CNT composite flexible sensors demonstrate the potential applications in monitoring finger bending, discriminating running, and walking. With the rapid development of the internet of things, the simple preparation of sensors has become a challenge. The present work presents the simple preparation of flexible sensors by using the fused deposition modeling (FDM) 3D printing combined with the microwave radiation‐assisted treatment of the thermoplastic polyurethane (TPU) with carbon nanotubes (CNTs) as conductive fillers to create the flexible sensors. The as‐prepared TPU/CNT composites exhibit the 7.27 MPa tensile strength and 401% elongation at break, similar to those of the pure TPU. After 200 tensile cycles, the TPU/CNT composites can still stably convert pressure into electrical signals, which can be used as flexible sensors with high sensitivity (0.879 kPa−1). In addition, shoe insoles and finger cover with sensing performance are fabricated through the FDM 3D printing technology, demonstrating the potential of the sensors to monitor human gait, finger straightening, and bending movements. The as‐proposed method involves the embedding CNTs as conductive fillers on the surface of TPU to form the TPU/CNT composite conductive layers on the surface of TPU, which is beneficial for maintaining the elasticity of the polymer matrix. The challenges in preparing stable, low‐cost, and scalable flexible sensors and highlights of the advantages of 3D printing technology in manufacturing flexible piezoresistive sensors are also deeply discussed.

Review: Progress on 3D printing technology in the preparation of flexible tactile sensors

Recent Progress on Three-dimensional Printing Processes to Fabricate Flexible Tactile Sensors

A review on 3D printable food materials: types and development trends

3D Printing Technologies for Flexible Tactile Sensors toward Wearable Electronics and Electronic Skin

Three-Dimensional Printing of Hydrogels for Flexible Sensors: A Review

3D Printed Flexible Strain Sensors: From Printing to Devices and Signals

Molding-Free Fully-Printed Flexible Tactile Sensors with Performance- Enhancing Microstructures

Research on flexible sensor based on 3D printing manufacturing by fused deposition molding

Conductive Polymer Composites Based Flexible Strain Sensors by 3D Printing: A Mini-Review

4D printing of shape-adaptive tactile sensor with tunable sensing characteristics

Progress on Flexible Tactile Sensors in Robotic Applications on Objects Properties Recognition, Manipulation and Human-Machine Interactions

Recent Advances of 4D Printing Technologies Toward Soft Tactile Sensors

Progress and prospects in flexible tactile sensors

Current materials for 3D-printed flexible medical electrodes

Low viscosity and highly flexible stereolithographic 3D printing resins for flexible sensors

Recent Progress on Screen-Printed Flexible Sensors for Human Health Monitoring

Flexible capacitive pressure sensor based on electrically assisted micro-nanoimprinting

Review of Materials and Fabrication Methods for Flexible Nano and Micro-Scale Physical and Chemical Property Sensors

Microwave Radiation Assisted Construction of Fused Deposition Modeling 3D Printing Flexible Sensors

Recent Advances in 3D Printed Sensors: Materials, Design, and Manufacturing

Flex-Structural Embedded Flexible Strain Sensor via 3D Printing