Abstract:Direct air capture (DAC) can be used to decrease the CO2 concentration in the atmosphere, but this requires substantial energy consumption. If residual waste carbon (in the form of bicarbonate solution) from DAC can be directly reused, it might present a novel method for overcoming the aforementioned challenges. Electrochemical CN coupling methods for synthesizing urea have garnered considerable attention for waste carbon utilization, but the carbon source is high-purity CO2. No research has been conducted regarding the application of bicarbonate solution as the carbon source. This study proposes a proof-of-concept electrochemical CN coupling process for synthesizing urea using bicarbonate solution from DAC as the carbon source and nitrate from wastewater as the nitrogen source. These results confirmed the feasibility of synthesizing urea using a three-electrode system employing TF and CuInS2/TF as the working electrodes via potentiostatic electrolysis. Under the optimal conditions (initial pH 5.0 and applied potential of -1.3 V vs. Ag/AgCl), the urea yield after 2 h of electrolysis reached 3017.2 μg h-1 mgcat.-1 and an average Faradaic efficiency of 19.6 %. The in-situ attenuated total reflection surface-enhanced infrared absorption spectroscopy indicated a gradual increase in the intensity of the -CONH bond signal on the surface of the CuInS2/TF electrode as the reaction progressed. This implied that this bond may be a key chemical group in this process. The density functional theory calculations demonstrated that *CONH was a pivotal intermediate during CN coupling, and a two-step CN coupling reaction path was proposed. *NH + *CO primarily transformed into *CONH, followed by the conversion reaction of *CONH + *NO to *NOCONH2. This study offers a groundbreaking approach for waste carbon utilization from DAC and holds the potential to furnish technical underpinnings for advancing electrochemical CN coupling methods.

Polycation-functionalized interface enable in situ capturing of CO 2 and filtering of proton for efficient C-N coupling toward highly selective urea electrosynthesis

Orderly Coating of Bilayer Polymer to Tailor Microenvironment for Efficient C‐N Coupling Toward Highly Selective Urea Electrosynthesis

Rectifying Heterointerface Facilitated C‐N Coupling Dynamics Enables Efficient Urea Electrosynthesis Under Ultralow Potentials

Sequential co-reduction of nitrate and carbon dioxide enables selective urea electrosynthesis

Efficient urea electrosynthesis from carbon dioxide and nitrate via alternating Cu–W bimetallic C–N coupling sites

A Strongly Coupled Metal/Hydroxide Heterostructure Cascades Carbon Dioxide and Nitrate Reduction Reactions toward Efficient Urea Electrosynthesis

Urea Synthesis via Coelectrolysis of CO2 and Nitrate over Heterostructured Cu-Bi Catalysts

Exploration of a novel electrochemical CN coupling process: Urea synthesis from direct air carbon capture with nitrate wastewater

Efficient Electrochemical Co‐Reduction of Carbon Dioxide and Nitrate to Urea with High Faradaic Efficiency on Cobalt‐Based Dual‐Sites

Efficient C-N Coupling for Urea Electrosynthesis on Defective Co3O4 with Dual-Functional Sites

Highly Efficient Electrosynthesis of Urea from CO2 and Nitrate by a Metal-Organic Framework with Dual Active Sites

Multi-heterointerfaces for selective and efficient urea production

Ligand engineering towards electrocatalytic urea synthesis on a molecular catalyst

Efficient urea electrosynthesis via coordination of the reaction rate of carbon dioxide and nitrate co‐reduction

Electrocatalytic Urea Synthesis with 63.5 % Faradaic Efficiency and 100 % N-Selectivity via One-step C-N coupling

Achieving efficient urea electrosynthesis through improving the coverage of a crucial intermediate across a broad range of nitrate concentrations

Tuning Intermediates Adsorption and C─N Coupling for Efficient Urea Electrosynthesis Via Doping Ni into Cu

Highly Efficient and Selective Electrosynthesis of Urea Via Co-Reduction of Carbon Dioxide and Nitrate over the TiNX Catalyst

Efficient urea synthesis via one-step N–C–N coupling: strong metal–support interaction-driven planar Cu clusters on two-dimensional Mo2C MXene

Fundamentals and Rational Design of Heterogeneous C‐N Coupling Electrocatalysts for Urea Synthesis at Ambient Conditions

Tailoring O‐Monodentate Adsorption of CO2 Initiates C–N Coupling for Efficient Urea Electrosynthesis with Ultrahigh Carbon Atom Economy