Abstract:Not only the driving for offshore wind energy capacity of 12 GW by Korea’s Renewable Energy 2030 plan but also the need for the rejuvenation of existing world-class shipbuilders’ infrastructures is drawing much attention to offshore wind energy in Korea, especially to the diverse substructures. Considering the deep-sea environment in the East Sea, this paper presents detailed modeling and analysis of spar-type substructure for a 5 MW floating offshore wind turbine (FOWT). This process uses a fully coupled integrated load analysis, which was carried out using FAST, a widely used integrated load analysis software developed by NREL, coupled with an in-house hydrodynamic code (UOU code). The environmental design loads were calculated from data recorded over three years at the Ulsan Marine buoy point according to the ABS and DNVGL standards. The total 12 maximum cases from DLC 6.1 were selected to evaluate the structural integrity of the spar-type substructure under the three co-directional conditions (45°, 135°, and 315°) of wind and wave. A three-dimensional (3D) structural finite element (FE) model incorporating the wind turbine tower and floating structure bolted joint connection was constructed in FEGate (pre/post-structural analysis module based on MSC NASTRAN for ship and offshore structures). The FEM analysis applied the external loads such as the structural loads due to the inertial acceleration, buoyancy, and gravity, and the environmental loads due to the wind, wave, and current. The three-dimensional FE analysis results from the MSC Nastran software showed that the designed spar-type substructure had enough strength to endure the extreme limitation in the East Sea based on the von Mises criteria. The current process of this study would be applicable to the other substructures such as the submersible type.

Toward the Realization of Concrete Floating Structures for Offshore Wind Power Generation in Japan

A Feasibility Study for Floating Offshore Windfarms in Japanese Waters

Integrated Numerical Investigation of a 15 MW Semi-Submersible Wind Turbine at Moderate Water Depth

Design, local structural stress, and global dynamic response analysis of a steel semi-submersible hull for a 10-MW floating wind turbine

Driving Down Cost: A Case Study of Floating Substructure for A 10MW Wind Turbine

Overall Strength Analysis of Floating Offshore Wind Turbine Foundation

A NEW CONCEPTUAL DESIGN FOR OFFSHORE FLOATING WIND TURBINE

Dynamic Behavior of a 10 MW Floating Wind Turbine Concrete Platform under Harsh Conditions

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

Structural Modeling and Failure Assessment of Spar-Type Substructure for 5 MW Floating Offshore Wind Turbine under Extreme Conditions in the East Sea

A Comprehensive Aero-Hydro-Structural Analysis of a 5 MW Offshore Wind Turbine System

Comparison of dynamic response and levelized cost of energy on three platform concepts of floating offshore wind turbine systems

Structural Strength Study of A Floating Wind Turbine Under Freak Waves Through the CFD-FEA Method

Simplified Strength Assessment for Preliminary Structural Design of Floating Offshore Wind Turbine Semi-Submersible Platform

Floating Offshore Wind Turbines: Current Status and Future Prospects

Preliminary Design and Dynamic Response of Multi-Purpose Floating Offshore Wind Turbine Platform: Part 1

An Early-Stage Structural Design of a Semi-Submersible Platform for Floating Offshore Wind Turbines in Chilean Waters

Coupled Dynamic Response of an Offshore Multi-Purpose Floating Structure Suitable for Wind and Wave Energy Exploitation

Substructure optimization of a 10MW floating wind turbine for installations in the Mediterranean Sea

Dynamics of a Y-shaped Semi-Submersible Floating Wind Turbine: a Comparison of Concrete and Steel Support Structures

Concept Study for the Floater Type Selection on Floating Offshore Wind Turbines