Abstract:Mine adopts grouting process for stope stability filling treatment, and the difference in grouting materials affects the overall treatment effect. This study used high content fly ash to replace part of cement as grouting material, and its feasibility and economic analysis were carried out. The study emphasizes the control of variables such as fly ash particle size (I-fly ash, II-fly ash, III-fly ash), fly ash content (80%, 70%, 60%, 50%), and slurry concentration (45%, 50%, 55%, 60%). Experimental analyses were assessed the initial and final setting time, porosity, and unconfined compressive strength of the grouting material. The grey relational analysis method was employed to determine the optimal mix of grouting material for on-site mining filling. The research findings indicate that increasing the fly ash content led to exponential growth in both the initial and final setting time, while the strength of the consolidated material exhibited a linear decrease. Similarly, reducing the slurry concentration resulted in exponential growth in the initial and final setting time and an exponential decrease in strength. The relationship between fly ash content, slurry concentration, and the strength of the consolidated body can be described by the function UCS = a − bx − cy + dx 2 + ey 2 − fxy , with fly ash content showing higher sensitivity to strength variations. A constitutive damage model was constructed by incorporating the initial porosity of the consolidated body and separately considering the solid skeleton and pores. Additionally, considering the curing age, a three-dimensional surface for predicting the strength of the consolidated body was constructed. The prediction indicates that the strength of the consolidated body gradually increases with a decrease in the particle size of fly ash, and the curing age also increases. The final setting time of the consolidated body gradually increases with an increase in the fly ash content. Finally, the optimal grouting material mix determined consisted of Type I fly ash with a content of 50% and a slurry concentration of 60%, providing a scientific reference for achieving the optimal grouting material mix in on-site mining filling.

Combined use of fly ash and silica to prevent the long-term strength retrogression of oil well cement set and cured at HPHT conditions

Long-term Thermal Performance of Oil Well Cement Modified by Silica Flour with Different Particle Sizes in HTHP Environment

EXPERIMENTAL RESEARCH ON STABILIZATION OF RED CLAY WITH CEMENT AND FLYASH

Study on the properties of nano silica modified cement for cementing

Enhancing Mid-Term Strength and Microstructure of Fly Ash–Cement Paste Backfill with Silica Fume for Continuous Mining and Backfilling Operations

Mechanical model and strength development evolution of high content fly ash–cement grouting material

The Ratio Optimization and Strength Mechanism of Composite Cementitious Material with Low-Quality Fly Ash

Effects of Curing Pressure on the Long-Term Strength Retrogression of Oil Well Cement Cured under 200 °C

Comparison between reactive MgO- and Na2SO4-activated low-calcium fly ash-solidified soils dredged from East Lake, China

Study on Mechanical and Microscopic Properties of Fly Ash Cement-Based Materials in High Geothermal Environment

Inhibitory mechanism of fly ash on alkali-silica reactivity of siliceous rock fine aggregate: A case study of Yangxi concrete dam

Combined use of mullite and basalt fiber to inhibit the strength decline of oil well cement stone under alternating conditions of temperature rise and fall

Strength and Microstructural Characteristics of Activated Fly Ash–Cement Paste

Evaluation and Optimization of Cement Slurry Systems for Ultra-Deep Well Cementing at 220 °C

Understanding the effect of high-volume fly ash on micro-structure and mechanical properties of cemented coal gangue paste backfill

Experimental Investigation and Numerical Model for Chloride Diffusivity of Long-Age Fly Ash Cement Slurry

Improvement of surface cementitious properties of coarse fly ash by dehydration and rehydration processes

Rheological and mechanical properties of oil-well cement reinforced by hybrid inorganic fibers

Experimental research on mechanical performance of grouting plugging material with large amount of fly ash

Influence of Calcined Flue Gas Desulfurization Gypsum and Calcium Aluminate on the Strength and AFt Evolution of Fly Ash Blended Concrete under Steam Curing

Experimental Study of Effect of Fly Ash on Self-Compacting Rammed Earth Construction Stabilized with Cement-Based Composites