Abstract:Silty soil has the characteristics of low natural moisture content and poor viscosity, and the strength and deformation required for foundation engineering can be satisfied by reinforcing and improving the silt. In order to study the reinforcement and improvement effects of polypropylene (PP) fiber and fly ash (FA) on cement–silty soil, an unconfined compressive strength (UCS) test, scanning electron microscope (SEM) test, and X-ray diffraction (XRD) analysis test were carried out. Cement (mixed amounts are 4%, 8%, 12%, and 16% of dry soil mass) was used as the basic modifier, and PP fiber (mixed amounts are 0%, 0.15%, 0.3%, and 0.45% of dry soil mass) compounded with FA (adding amounts of 0%, 5%, 10%, and 15% of dry soil mass) were used as an external admixture of cement–silty soil to study the mechanical properties, curing mechanism, and microstructure of the modified soil in different ages of 7 d, 14 d, 28 d, and 60 d. The test results show that with the increase in cement and curing age, the UCS of the modified soil increases, and with the increase in the PP fiber and FA, the UCS of the modified soil first increases and then decreases; there is an optimal content of FA and PP fiber, which are 10 and 0.15%, respectively. A large amount of C-S-H and AFt substances are produced inside the modified soil to cover the surface of soil particles or fill in the pores between soil particles, forming a tight spatial network structure and improving the mechanical properties of the cement–soil. The intensity of the diffraction peaks of the mineral components within the modified soils is more influenced by the cement and age, and the effect of FA is weaker. The stress–strain curve of the modified soil is divided into elastic stage, plastic deformation stage, and strain-softening stage, and the specimens in each stage have corresponding deformation characteristics. By analyzing the behavioral characteristics and curing improvement mechanism of modified soil from the duo perspective of macro-mechanical properties and microstructural composition, it can provide some basis for the engineering application of silty soil.

Strength performance of mucky silty clay modified using early-age fly ash-based curing agent

EXPERIMENTAL RESEARCH ON STABILIZATION OF RED CLAY WITH CEMENT AND FLYASH

Experimental Study on Mechanical Properties of Soft Clay Stabilized by Industrial By-Products

Mechanical Properties, Curing Mechanism, and Microscopic Experimental Study of Polypropylene Fiber Coordinated Fly Ash Modified Cement–Silty Soil

Strength and Microscopic Mechanism of Cement–Fly Ash–Slag–Desulfurization Gypsum Solidified Mica Schist Weathered Soil

The Effect of Changing Fly Ash Content on the Modulus of Compression of Stabilized Soil

Strength and microstructural properties of silt soil cured by lime-activated fly ash-GGBS under different curing temperatures

Characterization of red mud and fly ash based for co-curing of Cu 2+ -contaminated soil

Strength formation mechanism and curing system optimization of low-carbon cementitious materials prepared by synergistic activation of multiple alkaline solid wastes

Research on strength and microscopic characteristics of lime-activated fly ash-slag solidified sludge under high temperature effect

Influence of Calcined Flue Gas Desulfurization Gypsum and Calcium Aluminate on the Strength and AFt Evolution of Fly Ash Blended Concrete under Steam Curing

Effects of Fly Ash on Mechanical and Physical Properties of Earth-Based Construction

The Ratio Optimization and Strength Mechanism of Composite Cementitious Material with Low-Quality Fly Ash

Effects of Fly Ash Content on the Strength Development of Soft Clay Stabilized by One-Part Geopolymer under Curing Stress

Experimental Investigation and Numerical Model for Chloride Diffusivity of Long-Age Fly Ash Cement Slurry

Experimental Investigation of Unconfined Compression Strength and Microstructure Characteristics of Slag and Fly Ash-Based Geopolymer Stabilized Riverside Soft Soil

Influence of Multiple Factors on the Workability and Early Strength Development of Alkali-Activated Fly Ash and Slag-Based Geopolymer-Stabilized Soil

Influence of composition of curing agent and sand ratio of engineering excavated soil on mechanical properties of fluidized solidified soil

Unconfined Compressive Strength of Cement-Stabilized Qiantang River Silty Clay

Cementitious binder derived with fluorogypsum and low quality of fly ash

Performance Optimization of Alkaline Multi-Industrial Waste-Based Cementitious Materials for Soil Solidification