Introduction to CO 2 capture and conversion

Elena Shevchenko,Ah-Hyung Alissa Park,Shouheng Sun,Tierui Zhang

DOI: https://doi.org/10.1039/d2nr90219b

IF: 6.7

2023-01-01

Nanoscale

Abstract:Elena Shevchenko, Ah-Hyung Alissa Park, Shouheng Sun and Tierui Zhang introduce the Nanoscale themed collection on CO 2 capture and conversion.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry

What problem does this paper attempt to address?

Introduction to CO 2 capture, utilization and storage (CCUS)

Qiang Wang,Heriberto Pfeiffer,Rose Amal,Dermot O'Hare

DOI: https://doi.org/10.1039/d2re90007f

2022-01-01

Abstract:Qiang Wang, Heriberto Pfeiffer, Rose Amal, and Dermot O'Hare introduce the Reaction Chemistry & Engineering themed collection on CO 2 capture, utilization and storage (CCUS).

chemistry, multidisciplinary,engineering, chemical
Carbon Dioxide Capture and Utilization-Closing the Carbon Cycle

Tao Wang,Ah-Hyung Alissa Park,Yixiang Shi,Greeshma Gadikota

DOI: https://doi.org/10.1021/acs.energyfuels.8b04502

IF: 4.6541

2019-01-01

Energy & Fuels

Abstract:ADVERTISEMENT RETURN TO ISSUEEditorialNEXTCarbon Dioxide Capture and Utilization—Closing the Carbon CycleTao WangTao WangState Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou, Zhejiang 310027, People's Republic of ChinaMore by Tao Wanghttp://orcid.org/0000-0002-0535-7821, Ah-Hyung Alissa ParkAh-Hyung Alissa ParkDepartment of Earth and Environmental Engineering, Department of Chemical Engineering, and Lenfest Center for Sustainable Energy, Columbia University, New York City, New York 10027, United StatesMore by Ah-Hyung Alissa Park, Yixiang ShiYixiang ShiKey Laboratory for Thermal Science and Power Engineering of Ministry of Education, Department of Thermal Engineering, Tsinghua University, Beijing 100084, People's Republic of ChinaMore by Yixiang Shi, and Greeshma GadikotaGreeshma GadikotaDepartment of Civil and Environmental Engineering, Environmental Chemistry and Technology Program, Geological Engineering Program, Grainger Institute for Engineering, University of Wisconsin—Madison, Madison, Wisconsin 53706, United StatesMore by Greeshma GadikotaCite this: Energy Fuels 2019, 33, 3, 1693Publication Date (Web):January 14, 2019Publication History Published online14 January 2019Published inissue 21 March 2019https://pubs.acs.org/doi/10.1021/acs.energyfuels.8b04502https://doi.org/10.1021/acs.energyfuels.8b04502editorialACS PublicationsCopyright © 2019 American Chemical Society. This publication is available under these Terms of Use. Request reuse permissions This publication is free to access through this site. Learn MoreArticle Views4053Altmetric-Citations6LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InRedditEmail PDF (216 KB) Get e-AlertscloseSUBJECTS:Carbon capture and storage,Energy,Materials,Redox reactions Get e-Alerts
Nanoscale Understanding on CO 2 Diffusion and Adsorption in Clay Matrix Nanopores: Implications for Carbon Geosequestration

Jiangtao Pang,Yunfeng Liang,Fengyi Mi,Guosheng Jiang,Takeshi Tsuji,Fulong Ning

DOI: https://doi.org/10.1021/acs.est.4c08158

IF: 11.4

2024-10-09

Environmental Science & Technology

Abstract:Carbon capture and storage (CCS) in subsurface reservoirs represents a highly promising and viable strategy for mitigating global carbon emissions. In the context of CCS implementation, it is particularly crucial to understand the complex molecular diffusive and adsorptive behaviors of anthropogenic carbon dioxide (CO(2)) in the subsurface at the nanoscale. Yet, conventional molecular models typically represent only single-slit pores and overlook the complexity of interconnected nanopores. In...

environmental sciences,engineering, environmental
Application of Metal-Organic Frameworks (MOFs) in Carbon Capture

Litian Cao

DOI: https://doi.org/10.54097/hset.v73i.13103

2023-11-29

Abstract:The rising levels of CO2 are unavoidably connected to climate change and its consequences on atmospheric temperatures throughout the world. Carbon capture and storage (CCS) is a dependable and practical method for capturing carbon emissions from industry. This article introduces the realms of direct air capture, post-combustion carbon capture, and pre-combustion carbon capture. Furthermore, the paper delves into the fascinating world of metal-organic frameworks (MOFs) materials with a high porosity, tunable structures, and exceptional adsorption capacities that can effectively absorb substantial quantities of CO2, qualifying them as promising candidates for reducing greenhouse gas emissions. The synthesis methods and performance evaluation of MOF materials concerning carbon capture were introduced. Some of the challenges associated with MOFs are also discussed, including their reduced stability at high temperatures and sensitivity to moisture. This paper provides a comprehensive overview of carbon capture technologies, highlighting the potential of MOFs while addressing current challenges and opportunities in the field.
CO2 Capture, Utilization and Storage: Catalysts Design

Leonarda Francesca Liotta,Hongjing Wu

DOI: https://doi.org/10.3390/catal14010080

IF: 3.9

2024-01-19

Catalysts

Abstract:Today, the problem of CO2 emission into the atmosphere is one of the most urgent and complex challenges facing humanity[...]

chemistry, physical
Nanomaterials for adsorption and conversion of CO2 under gentle conditions

Chao Lu,Xiaoyang Shi,Yilun Liu,Hang Xiao,Junjie Li,Xi Chen

DOI: https://doi.org/10.1016/j.mattod.2021.03.016

IF: 24.2

2021-11-01

Materials Today

Abstract:Global warming effect caused by excessive emission of greenhouse gases, such as CO2 from modern industries, are emerging as serious environmental problem nowadays. Many strategies have been developed to address this issue, including solar energy utilization, green plants cultivation and coal desulfurization. These existing strategies always need sophisticated equipment and harsh reaction conditions, and are usually with limited efficiency. With the development of nanoscience and nanotechnology, it is becoming an effective strategy to directly capture and convert CO2 with nanomaterials into valuable chemicals under gentle conditions. Herein, we summarize recent progress on nanomaterials for adsorption and conversion of CO2 under gentle conditions, including various physical and chemical processes, and artificial photosynthesis. Future perspective and research direction of nanomaterials for CO2 adsorption and conversion have been put forward on the basis of existing research works and our experimental experience.

materials science, multidisciplinary
Frontiers of CO2 Capture and Utilization (CCU) towards Carbon Neutrality

Lingyun Zhang,Yanfang Song,Jialin Shi,Qun Shen,Deng Hu,Qiang Gao,Wei Chen,Kien-Woh Kow,Chengheng Pang,Nannan Sun,Wei Wei

DOI: https://doi.org/10.1007/s00376-022-1467-x

IF: 5.8

2022-07-03

Advances in Atmospheric Sciences

Abstract:CO 2 capture, utilization, and storage (CCUS) technology is a rare option for the large-scale use of fossil fuels in a low-carbon way, which will definitely play a part in the journey towards carbon neutrality. Within the CCUS nexus, CCU is especially interesting because these processes will establish a new "atmosphere-to-atmosphere" carbon cycle and thus indirectly offer huge potential in carbon reduction. This study focuses on the new positioning of CCUS in the carbon neutrality scenario and aims to identify potential cutting-edge/disruptive CCU technologies that may find important application opportunities during the decarbonization of the energy and industrial system. To this end, direct air capture (DAC), flexible metal-framework materials (MOFs) for CO 2 capture, integrated CO 2 capture and conversion (ICCC), and electrocatalytic CO 2 reduction (ECR) were selected, and their general introduction, the importance to carbon neutrality, and most up-to-date research progress are summarized.

meteorology & atmospheric sciences
Nanoscale Understanding on CO2 Diffusion and Adsorption in Clay Matrix Nanopores: Implications for Carbon Geosequestration

Jiangtao Pang,Yunfeng Liang,Fengyi Mi,Guosheng Jiang,Takeshi Tsuji,Fulong Ning

DOI: https://doi.org/10.1021/acs.est.4c08158

2024-11-19

Abstract:Carbon capture and storage (CCS) in subsurface reservoirs represents a highly promising and viable strategy for mitigating global carbon emissions. In the context of CCS implementation, it is particularly crucial to understand the complex molecular diffusive and adsorptive behaviors of anthropogenic carbon dioxide (CO2) in the subsurface at the nanoscale. Yet, conventional molecular models typically represent only single-slit pores and overlook the complexity of interconnected nanopores. In this work, finite kaolinite lamellar assemblages with abundant nanopores (r < 2 nm) were used. Molecular dynamics simulations were performed to quantify the spatial distribution correlations, adsorption preference, diffusivity, and residence time of the CO2 molecules in kaolinite nanopores. The movement of the CO2 molecules primarily occurs in the central and proximity regions of the siloxane surfaces, progressing from larger to smaller nanopores. CO2 prefers smaller nanopores over larger ones. The diffusion coefficients increase, while residence times decrease, with the pore size increasing, differing from typical slit-pore models due to the pore shape and interconnectivity. The perspectives in this study, which would be challenging in conventional slit-pore models, will facilitate our comprehension of the CO2 molecular behaviors in the complex subsurface clay sediments for developing quantitative estimation techniques throughout the CCS project durations.
Recent Advances on Nanomaterials for Electrocatalytic CO 2 Conversion

Chao Chen,Zhenyu Zhang,Guilin Li,Lei Li,Zhan Lin

DOI: https://doi.org/10.1021/acs.energyfuels.1c00448

2021-04-09

Abstract:The CO2 challenge is one of the most urgent issues at present. Conversion of CO2 to more valuable chemicals and fuels is considered to be a sustainable approach to deal with the CO2 issue. Electrocatalytic CO2 conversion (ECC) has received extensive attention recently owing to its mild operation conditions compared to conventional catalytic CO2 conversion, which generally requires harsh reaction conditions including high temperatures and high pressures. In the past decade, nanomaterials have been widely studied as electrocatalysts for CO2 conversion due to their intriguing properties including large surface area, tunable structures, and abundant surface chemistry, which generate enormous potential. Herein, we offer a comprehensive and insightful discussion in recent advances in the research field of ECC, especially the development of nanomaterials in the last five years (from 2015 to 2020) which have not been well-reviewed recently due to rapid development of the field. We also put special emphasis on structure/property–performance relationships and different catalytic mechanisms. Key scientific issues and prospective research directions are also presented. We believe that the insight in this review can serve as a clear guidance to design advanced electrocatalysts for CO2 conversion in the near future.

energy & fuels,engineering, chemical
Advances in Carbon Capture, Utilization and Storage (CCUS)

Cheng Cao,Haonan Zhu,Zhengmeng Hou

DOI: https://doi.org/10.3390/en17194784

IF: 3.2

2024-09-26

Energies

Abstract:Carbon Capture, Utilization, and Storage (CCUS) technology is essential for mitigating climate change as it captures CO2 and either utilizes it for chemical applications or stores it in geological formations [...]

energy & fuels
Insights into the CO2 Capture Characteristics within the Hierarchical Pores of Carbon Nanospheres Using Small-Angle Neutron Scattering

Ayan Maity,Saideep Singh,Swati Mehta,Tristan G A Youngs,Jitendra Bahadur,Vivek Polshettiwar

DOI: https://doi.org/10.1021/acs.langmuir.2c03474

IF: 3.9

2023-03-28

Langmuir

Abstract:Understanding adsorption processes at the molecular level has transformed the discovery of engineered materials for maximizing gas storage capacity and kinetics in adsorption-based carbon capture applications. In this work, we studied the molecular mechanism of gas (CO2, H2, methane, and ethane) adsorption inside an interconnected porous network of carbon. This was achieved by synthesizing novel macro-meso-microporous carbon (M3C) nanospheres with interconnected pore structures. The M3Cs showed a CO2 capture capacity of 5.3 mmol/g at atmospheric CO2 pressure, with excellent kinetics. This was due to fast CO2 adsorption within the interconnected hierarchical macro-meso-microporous M3C. In situ small-angle neutron scattering (SANS) under various CO2 pressures indicated that the macro- and mesopores of M3C enable fast diffusion of CO2 molecules inside the micropores, where adsorbed CO2 molecules densify into a liquid-like state. This strong densification of CO2 molecules causes fast CO2 diffusion in the macro- and mesopores of M3C, restarting the adsorption cycle for fresh CO2 molecules until all pores are completely filled. Notably, M3C also showed good capture capacities for hydrogen and various hydrocarbons, with excellent selectivity toward ethane over methane.
Nanofluids and nanocomposite membranes for enhanced CO2 capture: A Comprehensive Review

Dirar Aletan,Ezeddin Shirif,SD Jacob Muthu

DOI: https://doi.org/10.1115/1.4065147

2024-03-22

Journal of Energy Resources Technology

Abstract:Abstract The increasing concentration of greenhouse gasses in Earth's atmosphere is a critical concern, of which 75% of carbon dioxide (CO2) emissions are from the combustion of fossil fuels. This rapid increase in emissions led to irredeemable damages to ecosystems such as climate change, acid rain, etc. As a result, industries and academia have focused on developing innovative and cost-effective technologies for CO2 capture and storage (CCS). Physical/chemical absorption using amine and membrane-based technologies are generally used in CCS systems. However, the inherent technical and cost-effective limitations of these techniques directed their attention toward applying nanotechnologies for CCS systems. Here, the researchers have focused on infusing nanoparticles (NPs) into existing CCS technologies. The NPs could either be suspended in a base fluid to create nanofluids (NFs) or infused with membrane base materials to create nanocomposite membranes for enhanced carbon capture capabilities. This review paper investigates the manufacturing methods, characterization techniques and various mechanisms to analyze the impact of nanoparticles-infused nanofluids and nanocomposite membranes for CO2 capture. Finally, the paper summarises the factors associated with the two technologies and then outlines the drawbacks and benefits of incorporating NPs for CCS applications.

energy & fuels
Advances in Post‐Combustion CO 2 Capture by Physical Adsorption: From Materials Innovation to Separation Practice

Ru‐Shuai Liu,Xiao‐Dong Shi,Cheng‐Tong Wang,Yu‐Zhou Gao,Shuang Xu,Guang‐Ping Hao,Shaoyun Chen,An‐Hui Lu

DOI: https://doi.org/10.1002/cssc.202002677

IF: 8.4

2021-02-02

ChemSusChem

Abstract:The atmospheric CO 2 concentration continues a rapid rise to its current record high value of 416 ppm for the time being. It calls for advanced CO 2 capture technologies. One of the attractive technologies is physical adsorption‐based separation, which shows easy regeneration and long cycle stability, and thus reduced energy penalties and cost. The extensive research on this topic is evidenced by the growing body of scientific and technical literature. The progress spans from the innovation of novel porous adsorbents to practical separation practices. Major CO 2 capture materials include the most widely‐used industrially relevant porous carbons, zeolites, activated alumina, mesoporous silica, and the newly emerging metal‐organic frameworks (MOFs) and covalent‐organic framework (COFs), etc. The key intrinsic properties such as pore structure, surface chemistry, preferable adsorption sites and other structural features that would affect CO 2 capture capacity, selectivity, and recyclability are first discussed. The industrial relevant variables such as particle size of adsorbents, the mechanical strength, adsorption heat management and other technological advances are equally important, even more crucial when scaling up from bench and pilot‐scale to demonstration and commercial scale. Therefore, we aim to bring a full picture of the adsorption‐based CO 2 separation technologies, from adsorbent design, intrinsic properties evaluation to performance assessment not only under the ideal equilibrium conditions but also in realistic pressure swing adsorption processes .

chemistry, multidisciplinary,green & sustainable science & technology
Porous Carbon for CO2 Capture Technology: Unveiling Fundamentals and Innovations

Gazi A. K. M. Rafiqul Bari,Jae-Ho Jeong

DOI: https://doi.org/10.3390/surfaces6030023

2023-09-18

Surfaces

Abstract:Porous carbon is an emerging material for the capture of CO2 from point sources of emissions due to its high structural, mechanical, and chemical stability, along with reusability advantages. Currently, research efforts are mainly focused on high- or medium-pressure adsorption, rather than low-pressure or DAC (direct air capture) conditions. Highly porous and functionalized carbon, containing heteroatoms (N, O, etc.), is synthesized using different activation synthesis routes, such as hard template, soft template, and chemical activation, to achieve high CO2 capture efficiency at various temperatures and pressure ranges. Fundamental pore formation mechanisms with different activation routes have been evaluated and explored. Higher porosity alone can be ineffective without the presence of proper saturated diffusion pathways for CO2 transfer. Therefore, it is imperative to emphasize more rational multi-hierarchical macro-/meso-/micro-/super-/ultra-pore design strategies to achieve a higher utilization efficiency of these pores. Moreover, the present research primarily focuses on powder-based hierarchical porous carbon materials, which may reduce the efficiency of the capture performance when shaping the powder into pellets or fixed-bed shapes for applications considered. Therefore, it is imperative to develop a synthesis strategy for pelletized porous carbon and to explore its mechanistic synthesis route and potential for CO2 capture.
Incorporating Catalytic Units into Nanomaterials: Rational Design of Multipurpose Catalysts for CO 2 Valorization

Li-Qi Qiu,Hong-Ru Li,Liang-Nian He

DOI: https://doi.org/10.1021/acs.accounts.3c00316

IF: 24.466

2023-08-05

Accounts of Chemical Research

Abstract:ConspectusCO(2) conversion to valuable chemicals is effective at reducing CO(2) emissions. We previously proposed valorization strategies and developed efficient catalysts to address thermodynamic stability and kinetic inertness issues related to CO(2) conversion. Earlier, we developed molecular capture reagents and catalysts to integrate CO(2) capture and conversion, i.e., in situ transformation. Based on the mechanistic understanding of CO(2) capture, activation, and transformation at a...

chemistry, multidisciplinary
The Potential Applications of Nanoporous Materials for the Adsorption, Separation, and Catalytic Conversion of Carbon Dioxide

Gregor Sneddon,Alex Greenaway,Humphrey H. P. Yiu

DOI: https://doi.org/10.1002/aenm.201301873

IF: 27.8

2014-03-24

Advanced Energy Materials

Abstract:Carbon capture and storage (CCS) technologies aiming at tackling CO 2 emission have attracted much attention from scientists of various backgrounds. Most CCS systems require an efficient adsorbent to remove CO 2 from sources such as fossil fuels (pre‐combustion) or flue gas from power generation (post‐combustion). Research on developing efficient adsorbents with a substantial capacity, good stability and recyclability has grown rapidly in the past decade. Because of their high surface area, highly porous structure, and high stability, various nanoporous materials have been viewed as good candidates for this challenging task. Here, recent developments in several classes of nanoporous materials, such as zeolites, metal organic frameworks (MOFs), mesoporous silicas, carbon nanotubes, and organic cage frameworks, for CCS are examined and potential future directions for CCS technology are discussed. The main criteria for a sustainable CO 2 adsorbent for industrial use are also rationalized. Moreover, catalytic transformations of CO 2 to other chemical species using nanoporous catalysts and their potential for large scale carbon capture and utilization (CCU) processes are also discussed. Application of CCU technologies avoids any potential hazard associated with CO 2 reservoirs and allows possible recovery of some running cost for CO 2 capture by manufacturing valuable chemicals.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Single atomic Cu-Anchored 2D covalent organic framework as a nanoreactor for CO2 capture and in-situ conversion: A computational study

Ling Huang,Guiru Wang,Zhiqiang Liu,Zhiguo Yan,Anmin Zheng,Dapeng Cao

DOI: https://doi.org/10.1016/j.ces.2022.117536

IF: 4.7

2022-05-01

Chemical Engineering Science

Abstract:CO2 emission has emerged as a critical environment issue inducing greenhouse effects. How to capture CO2 and convert it into valuable chemicals is still a great challenge. Herein, we report a single atomic Cu-anchored covalent organic framework with Kagome lattice configuration (denoted as hex-Cu kgm-COF) and further investigate its properties in CO2 capture and conversion. Results indicate that hex-Cu kgm-COF shows not only a large CO2 adsorption capacity and high selectivity for CO2 over N2, but excellent hydrogenation activity of CO2 to form CH3OH and CH4, which are ascribed to the special configuration of kgm-COF with sufficient space and single atomic Cu active sites. In short, this work theoretically reports a novel adsorption and in situ conversion “2 in 1” nanoreactor to achieve the CO2 capture and resource utilization.

engineering, chemical
A scalable solid-state nanoporous network with atomic-level interaction design for carbon dioxide capture

Haiyan Mao,Jing Tang,Gregory S. Day,Yucan Peng,Haoze Wang,Xin Xiao,Yufei Yang,Yuanwen Jiang,Shuo Chen,David M. Halat,Alicia Lund,Xudong Lv,Wenbo Zhang,Chongqing Yang,Zhou Lin,Hong-Cai Zhou,Alexander Pines,Yi Cui,Jeffrey A. Reimer

DOI: https://doi.org/10.1126/sciadv.abo6849

IF: 13.6

2022-08-04

Science Advances

Abstract:Carbon capture and sequestration reduces carbon dioxide emissions and is critical in accomplishing carbon neutrality targets. Here, we demonstrate new sustainable, solid-state, polyamine-appended, cyanuric acid–stabilized melamine nanoporous networks (MNNs) via dynamic combinatorial chemistry (DCC) at the kilogram scale toward effective and high-capacity carbon dioxide capture. Polyamine-appended MNNs reaction mechanisms with carbon dioxide were elucidated with double-level DCC where two-dimensional heteronuclear chemical shift correlation nuclear magnetic resonance spectroscopy was performed to demonstrate the interatomic interactions. We distinguished ammonium carbamate pairs and a mix of ammonium carbamate and carbamic acid during carbon dioxide chemisorption. The coordination of polyamine and cyanuric acid modification endows MNNs with high adsorption capacity (1.82 millimoles per gram at 1 bar), fast adsorption time (less than 1 minute), low price, and extraordinary stability to cycling by flue gas. This work creates a general industrialization method toward carbon dioxide capture via DCC atomic-level design strategies.

multidisciplinary sciences
Recent Advances of Porous Solids for Ultradilute CO2 Capture

Ru-Shuai Liu,Shuang Xu,Guang-Ping Hao,An-Hui Lu

DOI: https://doi.org/10.1007/s40242-021-1394-x

IF: 3.1

2021-11-24

Chemical Research in Chinese Universities

Abstract:The urgency of dealing with global climate change caused by greenhouse gas(GHG) emissions is increasing as the carbon dioxide(CO2) concentration in the atmosphere has reached a record high value of 416 ppm(parts per million). Technologies that remove CO2 from the surrounding air(direct air capture, DAC) could result in negative carbon emissions, and thus attracts increasing attention. The steady technical progress in adsorption-based CO2 separation greatly advanced the DAC, which largely relies on advanced sorbent materials. This review focuses on the latest development of porous solids for air capture; first discussed the main types of sorbents for air capture, which include porous carbons, zeolites, silica materials, and metal-organic frameworks(MOFs), particularly their modified counterparts. Then, we evaluated their performances, including uptake and selectivity under dry and humid CO2 streams for practical DAC application. Finally, a brief outlook on remaining challenges and potential directions for future DAC development is given.

chemistry, multidisciplinary

Introduction to CO 2 capture and conversion

Introduction to CO 2 capture, utilization and storage (CCUS)

Carbon Dioxide Capture and Utilization-Closing the Carbon Cycle

Nanoscale Understanding on CO 2 Diffusion and Adsorption in Clay Matrix Nanopores: Implications for Carbon Geosequestration

Application of Metal-Organic Frameworks (MOFs) in Carbon Capture

CO2 Capture, Utilization and Storage: Catalysts Design

Nanomaterials for adsorption and conversion of CO2 under gentle conditions

Frontiers of CO2 Capture and Utilization (CCU) towards Carbon Neutrality

Nanoscale Understanding on CO2 Diffusion and Adsorption in Clay Matrix Nanopores: Implications for Carbon Geosequestration

Recent Advances on Nanomaterials for Electrocatalytic CO 2 Conversion

Advances in Carbon Capture, Utilization and Storage (CCUS)

Insights into the CO2 Capture Characteristics within the Hierarchical Pores of Carbon Nanospheres Using Small-Angle Neutron Scattering

Nanofluids and nanocomposite membranes for enhanced CO2 capture: A Comprehensive Review

Advances in Post‐Combustion CO 2 Capture by Physical Adsorption: From Materials Innovation to Separation Practice

Porous Carbon for CO2 Capture Technology: Unveiling Fundamentals and Innovations

Incorporating Catalytic Units into Nanomaterials: Rational Design of Multipurpose Catalysts for CO 2 Valorization

The Potential Applications of Nanoporous Materials for the Adsorption, Separation, and Catalytic Conversion of Carbon Dioxide

Single atomic Cu-Anchored 2D covalent organic framework as a nanoreactor for CO2 capture and in-situ conversion: A computational study

A scalable solid-state nanoporous network with atomic-level interaction design for carbon dioxide capture

Recent Advances of Porous Solids for Ultradilute CO2 Capture