Abstract:Theoretical prediction model for the compressive behavior of the hybrid tube considering compression angle. The oblique collision happening in vehicle accidents poses a huge threat to passive safety, which causes great difficulties in the design of energy absorption (EA) structures and the prediction of EA capacity due to its highly nonlinear deformation characteristics. This study aims to establish a theoretical prediction model for the compression performance of Carbon Fiber Reinforced Polymer (CFRP)/Al hybrid tube considering the loading angle. First, a high‐precision FE model was established to obtain the influence laws of tube diameter, Al thickness, and CFRP thickness on the crashworthiness of CFRP/Al hybrid tubes, laying the foundation for subsequent theoretical model validation. Second, by summarizing the deformation modes of hybrid tubes generated by various parameter combinations, a modified global origami deformation assumption was proposed under multi‐angle compression conditions, and the key terms in energy composition are extracted based on the initial and final states of folding elements. Third, a theoretical model for predicting the mean crushing forces (MCFs) of hybrid tubes was established by revealing the correlation mechanism between energy composition terms and loading angle. Finally, the theoretical prediction model was validated by experiment and simulation results and the application premise was given. Results showed that the theoretical prediction model was proved to be of high accuracy, as the average absolute prediction errors of MCF under axial, 10°, 20°, and 30° compression conditions were 6.54%, 4.63%, 3.72%, and 3.93%, respectively. This study provides valuable guidance for the forward design and development of multi‐material hybrid structures facing complex crushing conditions. Highlights An analytical model of the hybrid circular tubes considering compression angle is newly proposed. Deformation mode and axial crushing response are analyzed by experiments. The major energy dissipation mechanism for hybrid circular tubes is explicitly derived. The Al thickness has the most significant impact on energy absorption. The recommendations for the design and development of hybrid tube are provided.

Predictive modeling of jute‐polyester composite tubes for impact performance: A comprehensive finite element analysis approach

Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture

Enhancement the Crashworthiness Parameters Using Natural and Hybrid Composites under Axial Static Crushing

Comparison of two progressive damage models for predicting low-velocity impact behavior of woven composites

Experimental and Numerical Analysis of Lightweight Hybrid Composites Under Low Velocity Impact

Optimization of jute nonwoven fabric reinforcement for the development of a rigid composite

A Progressive Damage Model of Composite Laminates under Low-Velocity Impact

Progressive Failure Analysis and Energy-Absorbing Experiment of Composite Tubes under Axial Dynamic Impact

Friction and Wear Studies on Jute Fiber and SS 304 Wire Mesh Reinforced Hybrid Polymer Composites for Automotive Applications

Computational Analysis of Mechanical Properties in Polymeric Sandwich Composite Materials

Gradually Failure Simulation and Energy Absorption Characteristics of GFRP Composite Tubes Subjected to Axial Dynamic Impact

Impact Damage and Residual Strength of Composite Joints in Car Bodies

A study on hybrid jute and palm fibers blend/polyester composites: Properties and potential end uses

Crashworthiness and Failure Analyses of FRP Composite Tubes under Low Velocity Transverse Impact

Investigation of Mechanical Attributes and Dynamic Mechanical Analysis of Hybrid Polyester Composites for Automotive Applications

Investigation of the mechanical properties of jute and glass fiber reinforced epoxy composite for sustainable and cost-effective applications

Low-velocity impact and quasi-static post-impact compression analysis of woven structural composites for automotive: Influence of fibre types and architectural structures

An Explicit–implicit Combined Model for Predicting Residual Strength of Composite Cylinders Subjected to Low Velocity Impact

Theoretical prediction model for the compressive behavior of the hybrid tube considering compression angle

Prediction of Load-Bearing Capacity of Composite Parts with Low-Velocity Impact Damage: Identification of Intra- and Inter-Ply Constitutive Models

A New Integrated Modeling Method for Predicting Low-Velocity Impact Behavior and Residual Tensile Failure of Z-pinned T-joints