Abstract:<span><b>Abstract</b>The flouride-salt-cooled high-temperature reactor (FHR) uses graphite-matrix coated-particle fuel [the same as high-temperature gas-cooled reactors (HTGRs)] and a clean liquid salt coolant. It delivers heat to the industrial process or the power cycle at temperatures between 600°C and 700°C with average heat delivery temperatures higher than for other reactors. The melting point of the liquid salt coolant is above 450°C. The high minimum temperatures present refueling challenges and require special features to control temperatures, avoiding excessively high temperatures and freezing of the coolant that could impact decay heat cooling systems. This paper describes a preconceptual FHR design that addresses many of these challenges by adopting features from the British advanced gas-cooled reactor (AGR) and alternative decay heat cooling systems. The bases for specific design choices are described.The AGRs are carbon dioxide–cooled and graphite-moderated reactors that use cylindrical fuel subassemblies with vertical refueling at 650°C, which meets the FHR high-temperature refueling requirements. Fourteen AGRs have operated for many decades. The AGR uses eight cylindrical fuel subassemblies, each 1 m tall coupled axially together by a metal stringer to create a long fuel assembly. The stringer assemblies are in vertical channels in a graphite core that provides neutron moderation. This geometric core design is compatible with an FHR using graphite-matrix coated-particle fuel. The FHR uses a once-through fuel cycle. The design minimizes used nuclear fuel volumes relative to other FHR and HTGR designs. The primary system is inside a secondary liquid salt–filled tank that (1) provides an added heat sink for decay heat, (2) helps to ensure no freezing of primary system salt, and (3) helps to ensure no major fuel failures in a beyond-design-basis accident. The refueling standpipes above each stringer fuel assembly in the AGR core with modifications can be used in an FHR for refueling and can provide efficient heat transfer between the primary system and the secondary liquid salt–filled tank. The passive decay heat removal system uses heat pipes that turn on and off at a preset temperature to avoid overheating the core in a reactor accident and to avoid freezing the salt coolant as decay heat decreases after reactor shutdown.</span>

A proposal for advanced supplementary technologies and a hybrid system with gas-cooled fast reactor concept ALLEGRO

Study of the Allegro Core Performance

Allegro: The European Gas Fast Reactor Demonstrator Project

GAS-COOLED FAST REACTOR-ALLEGRO DECAY HEAT REMOVAL STUDIES

A Definitive Model of a Small-Scale Concentrated Solar Power Hybrid Plant Using Air as Heat Transfer Fluid with a Thermal Storage Section and ORC Plants for Energy Recovery

ALLEGRO Core Degradation Study using MELCOR 2.1

Design and optimization of flexible decoupled high-temperature gas-cooled reactor plants with thermal energy storage

Analysis of the secondary circuit of a gas-cooled fast reactor

On the Selection and Qualification of Fuel for the Start-Up Core of Allegro Gas-Cooled Fast Reactor

Concept of the polish high temperature gas-cooled reactor HTGR-POLA

Pre-Conceptual Design of the Research High-Temperature Gas-Cooled Reactor TeResa for Non-Electrical Applications

Cost analysis and energy return on investment of fuel cell and gas turbine integrated fusion-biomass hybrid system; application of a small scale conceptual fusion reactor GNOME

An Advanced Energy System Using a Small Fast Reactor as an Energy Source

Dynamic Modeling of Nuclear Hydrogen Generation Plant Based on Multi-Modular High-Temperature Gas-Cooled Reactor

Advanced Energy with Safety,economy and High Efficiency

Fluoride-Salt-Cooled High-Temperature Reactor (FHR) Using British Advanced Gas-Cooled Reactor (AGR) Refueling Technology and Decay Heat Removal Systems That Prevent Salt Freezing

Allothermal Fluidized Bed Reactor for Steam Gasification of Biomass

Automatic Generation Control for the Flexible Operation of Multimodular High Temperature Gas-Cooled Reactor Plants

Analysis of Power Conversion System Options for ARC-like Tokamak Fusion Reactor Balance of Plant

Technical and economic evaluation of heat transfer fluids for a TES system integrated to an advanced nuclear reactor

COGENERATION OF MULTI-MODULAR HIGH TEMPERATURE GAS-COOLED REACTOR BASED ON CU-CL CYCLE AND HIGH TEMPERATURE ELECTROLYSIS