Abstract:We have performed a series of molecular dynamics simulations aimed at the evaluation of the solubility of CO2 in silicate melts of natural composition (from felsic to ultramafic). In making in contact within the simulation cell a supercritical CO2 phase with a silicate melt of a given composition, we have been able to evaluate (i) the solubility of CO2 in the P–T range 1473–2273K and 20–150kbar, (ii) the density change experienced by the CO2-bearing melt, (iii) the respective concentrations of CO2 and CO 3 2 - species in the melt, (iv) the lifetime and the diffusivity of these species and (v) the structure of the melt around the carbonate groups. The main results are the following: (1) The solubility of CO2 increases markedly with the pressure in the three investigated melts (a rhyolite, a mid-ocean ridge basalt and a kimberlite) from about ∼2wt% CO2 at 20kbar to ∼25wt% at 100kbar and 2273K. The solubility is found to be weakly dependent on the melt composition (as far as the present compositions are concerned) and it is only at very high pressure (above ∼100kbar) that a clear hierarchy between solubilities occurs (rhyolite<MORB<kimberlite). Furthermore at a given pressure the calculated solubility is negatively correlated with the temperature. (2) In CO2-saturated melts, the proportion of carbonate ions ( CO 3 2 - ) is positively correlated with the pressure at isothermal condition and is negatively correlated with the temperature at isobaric condition (and vice versa for molecular CO2). Furthermore, at fixed (P, T) conditions the proportion of carbonate ions is higher in CO2-undersaturated melts than in the CO2-saturated melt. Although the proportion of molecular CO2 decreases when the degree of depolymerization of the melt increases, it is still significant in CO2-saturated basic and ultrabasic compositions at high temperatures. This finding is at variance with experimental data on CO2-bearing glasses which show no evidence of molecular CO2 as soon as the degree of depolymerization of the melt is high (e.g. basalt). These conflicting results can be reconciled with each other by noticing that a simple low temperature extrapolation of the simulation data predicts that the proportion of molecular CO2 in basaltic melts might be negligible in the glass at room temperature. (3) The carbonate ions are found to be transient species in the liquid phase, with a lifetime increasing exponentially with the inverse of the temperature. Contrarily to a usual assumption, the diffusivity of carbonate ions into the liquid silicate is not vanishingly small with respect to that of CO2 molecules: in MORB they differ from each other by a factor of ∼6 at 1473K and only a factor of ∼2 at 2273K. Although the bulk diffusivity of CO2 is governed primarily by the diffusivity of CO2 molecules, the carbonate ions contribute significantly to the diffusivity of CO2 in depolymerized melts. (4) Concerning the structure of the CO2-bearing silicate melt, the carbonate ions are found to be preferentially associated with NBO’s of the melt, with an affinity for NBOs which exceeds that for BOs by almost one order of magnitude. This result explains why the concentration in carbonate ions is positively correlated with the degree of depolymerization of the melt and diminishes drastically in fully polymerized melts where the number of NBO’s is close to zero. Furthermore, the network modifier cations are not randomly distributed in the close vicinity of carbonate groups but exhibit a preferential ordering which depends at once on the nature of the cation and on the melt composition. However at the high temperatures investigated here, there is no evidence of long lived complexes between carbonate groups and metal cations.

Effect of Carbon Dioxide Temperature on Adhesion of Na2SiO3 Binder to Silica Sand Surface: Comparison of Experimental Data with Molecular Dynamics Simulations

Effects of water and carbon dioxide pressure on the adhesion of Na2SiO3 and K2SiO3 binders on silica sand surface: Comparison of experimental data and molecular dynamics simulation

Performance of Nano-Caco3 Coated with SiO2 on CO2 Adsorption at High Temperature

Particle Carbonation Kinetics Models and Activation Methods under Mild Environment: the Case of Calcium Silicate

Materials Studio simulation for the adsorption properties of CO2 molecules at the surface of sodium silicate and potassium silicate solution under different pressure conditions

"Materials Studio" Simulation Study of the Adsorption and Polymerization Mechanism of Sodium Silicate on Active Silica Surface at Different Temperatures

Molecular simulation and experimental characterization of the effect of hydroxides on the properties of hot hardening sodium silicate bonded ceramic sand

Effect of Complex Modifier on Properties of Heat-Hardened Sodium Silicate-Bonded Sand for Castings Production

Effect of Temperature on Chromite-Based Moulding Sands Bonded with Sodium Silicate

Mechanisms of Solidification and Pulverization of Sodium Silicate Binder

Effects of adhesive modulus and curing conditions on curing behavior of silicate based ceramic coatings on carbon fiber reinforced resin matrix composites

Wettability, adhesive performance and structural evolution of an environment-friendly modified silicate binder for foundry moulding and coremaking

Influence Mechanism of the Interfacial Water Content on Adhesive Behavior in Calcium Silicate Hydrate−Silicon Dioxide Systems: Molecular Dynamics Simulations

Synergistic effects of CO2 density and salinity on the wetting behavior of formation water on sandstone surfaces: Molecular dynamics simulation

Effects of Ca/Si Ratio, Aluminum and Magnesium on the Carbonation Behavior of Calcium Silicate Hydrate

Effect of Additives on Heat Hardened Inorganic Solid Foundry Binder

C−S−H gel structure and water molecules behaviors under different chemical environments in a range of temperatures

CO2‐Induced Modulation of Si–O Bonds for Low Temperature Plastic Deformation of Amorphous Silica Nanoparticles with Enhanced Photoluminescence

Fabrication and posttreatment for inorganic binder jetting sand molds for casting

Carbon dioxide in silicate melts: A molecular dynamics simulation study

Molecular dynamics study on friction property between fused silica and SiC mold in high temperature molding