Abstract:Flapping wings can pitch passively about their pitching axes due to their flexibility, inertia, and aerodynamic loads. A shift in the pitching axis location can dynamically alter the aerodynamic loads, which in turn changes the passive pitching motion and the flight efficiency. Therefore, it is of great interest to investigate the optimal pitching axis for flapping wings to maximize the power efficiency during hovering flight. In this study, flapping wings are modeled as rigid plates with non-uniform mass distribution. The wing flexibility is represented by a linearly torsional spring at the wing root. A predictive quasi-steady aerodynamic model is used to evaluate the lift generated by such wings. Two extreme power consumption scenarios are modeled for hovering flight, i.e. the power consumed by a drive system with and without the capacity of kinetic energy recovery. For wings with different shapes, the optimal pitching axis location is found such that the cycle-averaged power consumption during hovering flight is minimized. Optimization results show that the optimal pitching axis is located between the leading edge and the mid-chord line, which shows close resemblance to insect wings. An optimal pitching axis can save up to 33% of power during hovering flight when compared to traditional wings used by most of flapping wing micro air vehicles (FWMAVs). Traditional wings typically use the straight leading edge as the pitching axis. With the optimized pitching axis, flapping wings show higher pitching amplitudes and start the pitching reversals in advance of the sweeping reversals. These phenomena lead to higher lift-to-drag ratios and, thus, explain the lower power consumption. In addition, the optimized pitching axis provides the drive system higher potential to recycle energy during the deceleration phases as compared to their counterparts. This observation underlines the particular importance of the wing pitching axis location for energy-efficient FWMAVs when using kinetic energy recovery drive systems.

Power synchronisations determine the hovering flight efficiency of passively pitching flapping wings

Effect of the Wing Morphology and Structural Form on the Flexible Hovering Flapping Wing

Optimal pitching axis location of flapping wings for efficient hovering flight

Delft University of Technology Optimal pitching axis location of flapping wings for efficient hovering flight

Elastic storage enables robustness of flapping wing dynamics

A bio-inspired study on tidal energy extraction with flexible flapping wings

Scaling of the performance of insect-inspired passive-pitching flapping wings

Effects of flapping-motion profiles on insect-wing aerodynamics

Experimental and computational studies of the aerodynamic performance of a flapping and passively rotating insect wing

Phenomenology and scaling of optimal flapping wing kinematics

Numerical investigation of an insect-scale flexible wing with a small amplitude flapping kinematics

Aerodynamics and stability of hawkmoth forward flight with flexible wing hinge

Dynamic pitching of an elastic rectangular wing in hovering motion

Aerodynamic performance of a hovering hawkmoth with flexible wings: a computational approach

Fluid-structure interaction for aerodynamic performance evaluation of flapping wing with passive pitching motion

Aerodynamic performance of two-dimensional, chordwise flexible flapping wings at fruit fly scale in hover flight

Aero-optimum hovering kinematics

Force production and asymmetric deformation of a flexible flapping wing in forward flight

Flexibility Effects of a Flapping Mechanism Inspired by Insect Musculoskeletal System on Flight Performance

An experimental and three-dimensional computational study on the aerodynamic contribution to the passive pitching motion of flapping wings in hovering flies

Wing Geometry and Kinematic Parameters Optimization of Flapping Wing Hovering Flight