Abstract:Computational modelling for microchannel reactor design was performed to investigate the effects of various factors on the efficiency and performance of an autothermal reforming system. The yield and productivity from the chemical process were determined by performing computational fluid dynamics and thermodynamic analysis. Strength and weakness were assessed under different reaction conditions. Design recommendations were provided and operation strategies were mapped out. The results indicated that operation at millisecond contact times is feasible, but optimisation of reaction conditions is necessary to balance efficiency and performance. The conversion to hydrogen is influenced greatly by the feed composition, which must be controlled precisely within certain needed limits to maximize the yield and productivity from the process while avoiding the problems of combustion or explosion. Additionally, the efficiency difference between feed compositions is determined by thermodynamic analysis. The pressure and flow rate set strict limits on operation, and there is a trade-off between high productivity and low conversion. The pressure and flow rate play competing roles in reactor operation. Lower pressures and flow rates can increase the conversion and yield, but higher pressures and flow rates can significantly improve the hydrogen productivity and output power, which is essential to the success of start-up and acceleration of the downstream equipment. There may exist an optimum pressure and flow rate in terms of both efficiency and performance. Output power in excess of 6000 kW per cubic meter can be achieved by the system.

Modeling and Numerical Simulation of Hydrogen Production by Diesel Reforming Based on ASPEN PLUS

Modeling, Simulation and Optimization of a Whole Industrial Catalytic Naphtha Reforming Process on Aspen Plus Platform

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Simulation of Industrial Catalytic Reforming Process by Developing User's Module on ASPEN PLUS Platform

Thermodynamic Simulation of Hydrogen Production from the Nano-Cao Reactive Sorption Enhanced Biomass Steam Reforming

Thermodynamic calculations for reactive sorption enhanced reforming of C2/C3 light hydrocarbons

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Simulation, Sensitivity Analysis and Optimization of Hydrogen Production by Steam Reforming of Methane Using Aspen Plus

Modeling and analysis for enhanced hydrogen production in process simulation of methanol reforming

Simultaneous Optimization Of Hydrogen Network With Desulfurization Processes Embedded

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Modeling and Optimization of Ethane Steam Cracking Process in An Industrial Tubular Reactor with Improved Reaction Scheme

Numerical Simulation and Experimental Investigation of Diesel Fuel Reforming over a Pt / CeO 2-Al 2 O 3 Catalyst

Design and optimization of reforming hydrogen production reaction system for automobile fuel cell

Numerical Simulation and Experimental Study on Commercial Diesel Reforming over an Advanced Pt/Rh Three-Way Catalyst

Design and optimization of hydrogen production system model for dimethyl ether self-heating steam reforming

Molecular Modeling and Optimization for Catalytic Reforming

Computational modelling of methanol autothermal reforming phenomena in microchannel reactors for hydrogen production

Adaptive Control Design for Hydrogen Production Via Autothermal Reforming of Methanol

Process Flow Modeling of Hydrogen Production

Study on Process of Autothermal Reforming of Diesel to Hydrogen