Abstract:The thermal cracking process of methane does not present the emissions of polluting gases, forming only hydrogen with a high degree of purity and solid carbon that can be commercialized for other industrial purposes globally. Thermodynamic methodologies based on Gibbs energy minimization and entropy maximization are used in the present study to simulate operating conditions of isothermal and adiabatic reactors, respectively. The chemical equilibrium and combined phases problem were written in a non-linear programming form and optimized with the GAMS software using the CONOPT 3 solver. The results obtained by the methodology described in this study present a good agreement with the data reported in the literature, with mean relative deviations lower than 1.08%. High temperatures and low pressures favor the decomposition of methane and the formation of products. When conditioned in an isothermal reactor, total methane conversions are obtained at temperatures above 1200 K at 1 bar. When conditioned to an adiabatic reactor, due to the lack of energy support provided by the isothermal reactor and taking into account that it is an endothermic process, high methane-conversion rates are obtained for temperatures above 1600 K at 1 bar. As an alternative, the combined effects of the addition of hydrogen to the feed combined with a system of extreme pressure variation indicate a possibility of conducting the thermal cracking process of methane in adiabatic systems. Setting the CH4/H2 ratio in the system feed at 1:10 at 1600 K and 50 bar, following severe depressurization through an isentropic valve, varying the pressure from 50 to 1 bar, the methane conversion varies from 0 to 94.712%, thus indicating a possible operational conformation for the process so that the amount of carbon generated is not so harmful to the process, taking into account that the formation of the same occurs only after the reaction and heating processes. Under the same operating conditions, it is possible to use about 40.57% of the generated hydrogen to provide energy for the process to occur.

Process Flow Modeling of Hydrogen Production

Hydrogen Production Via Ammonia from Methane Integrated with Enhanced Oil Recovery: A Techno-Economic Analysis

A near-zero carbon emission methanol production through CO2 hydrogenation integrated with renewable hydrogen: Process analysis, modification and evaluation

Techno-economic Analysis and Optimization of a Novel Hybrid Solar-Wind-bioethanol Hydrogen Production System Via Membrane Reactor

Process Design and Economic Assessment of Biomass-Based Hydrogen Production Processes

Modeling and analysis for enhanced hydrogen production in process simulation of methanol reforming

Process Design for the Directly Coupled Production of Methanol and Formaldehyde Based on CO2

Renewable Hydrogen Production Processes for the Off-Gas Valorization in Integrated Steelworks through Hydrogen Intensified Methane and Methanol Syntheses

Hydrogen Production: State of Technology

Modelling And Simulation Of Hydrogen Production Plant for Minimum Carbon Dioxide Emission

Simulation, Sensitivity Analysis and Optimization of Hydrogen Production by Steam Reforming of Methane Using Aspen Plus

A comprehensive approach for hydrogen production from crude glycerol: Process synthesis, energy integration, and storage

Hydrogen sulfide methane reforming: A kinetic modeling and techno-economic analysis study

Hydrogen production from biogas: Process optimization using ASPEN Plus®

Optimal design of large-scale solar-aided hydrogen production process via machine learning based optimisation framework

Towards a sustainable, and economic production future: Proposing a new process for methanol production based on renewable hydrogen

Simulation modelling of hydrogen production from steam reforming of methane and biogas

An Analysis of the Methane Cracking Process for CO2-Free Hydrogen Production Using Thermodynamic Methodologies

Hydrogen Technologies: A Critical Review and Feasibility Study

Scenario-Based Techno-Economic Analysis of Steam Methane Reforming Process for Hydrogen Production

Hydrogen Production via Steam Reforming: A Critical Analysis of MR and RMM Technologies