Abstract:Purpose. Coal mining activities by underground mining method will disrupt the equilibrium of the surrounding rock mass. In underground mining, determining the influence zone of exploiting the longwall on the topographic surface is extremely important.Through analyzing the displacement and deformation of the rock mass when exploiting the longwall 21103 in Seam 11 at Nui Beo Coal Mine, the influence is to be determined of exploiting this longwall on the topographic surface in order to forecast the boundary of the influence zone that may affect the surface works, ensuring the safety of such works. Methodology. To achieve the research results, actual field survey methods, data analysis and numerical modeling methods are used in this article. Findings. Analysis of the results from the numerical model determined that the total height of the collapsed and cracked area when exploiting the longwall 21103 in Seam 11 is about 85 m. The subsidence to the ground is about 10 cm from the center of the subsidence area. The analysis results from the numerical model also show that the roof collapse angle is 69°, thereby determining the area of influence on the topographic surface in the range of 55 m. Results on the cross-sections show that the boundary of the influence of mining on the topographic surface is the closest section 6–6, which is about 12 m. The stability time of the collapsed rock mass is determined to be about 5 months. Originality. On the basis of UDEC (Universal Distinct Element Code) software, the authors have developed a simulation model for the mining process of the longwall 21103 in Seam 11. Analysis of the results from the model has shown the state of displacement and deformation of the surrounding rock mass. In this study, the numerical modeling method is applied to simulate the displacement of the longwall, which is consistent with the actual production of the underground mine. This enabled the authors to assess and identify the affected area with the required degree of reliability. Practical value. The research results of the paper are used as a basis for implementation in actual production at Nui Beo Coal Mine. On the basis of the analysis of the surrounding rock mass displacements and deformations, when exploiting the longwall 21103 in Seam 11 at Nui Beo Coal Mine, the affected boundary of the topographic surface has been determined. At the same time, the stability time of the collapsed rock mass is also calculated. So, this is also the basis for Nui Beo Coal Mine to plan construction works on the site outside the determined affected areas to ensure the safety of such works.

Application of mining technology by the combination of ANSH equipment to longwall in Seam 6 of Mao Khe coal mine, Viet Nam

An Effective Method for Longwall Automation in Thin Coal Seam.

Solutions to prevent face spall and roof falling in fully mechanized longwall at underground mines, Vietnam

Research on an Intelligent Mining Complete System of a Fully Mechanized Mining Face in Thin Coal Seam

Exploration of Deep-inclined Medium-thickness Coal Seam With Deep-hole Blasting Technology

Present situation of fully mechanized mining technology for steeply inclined coal seams in China

A Solution to Ensure Ventilation when Expanding the Area of Cam Thanh Underground Coal Mine, Ha Long Coal Company, Vietnam

Tendencies of Mining Technology Development in Relation to Deep Mines

Research and practice of fully mechanized coal mining technology in thin coal seam

Improvement of production arrangement chart for mechanised longwall at Seam 11 of Centre area - Duong Huy coal mine

Fully mechanizede sunlevel caving minging of great angle thick coal seam Mine of Zhao Gezhuang

A Study on Mining Technology Transformation of Shorter Longwall Face in Large Inclined Angle and Complex Coal Seam with Dirt Band

Study on a High-Efficiency Mining Technology System for Gas Outburst in Coal Seams—Example of an H Coal Mine

Methods for the Geophysical Exploration and Sustainable Utilisation of Coalbed Methane Resources in Abandoned Mines of Shanxi, China

Research on key technologies of intelligent working face in coal

The evolution of thick coal seams mining methods in China

Research on Large Mining Height Technique for Thick Coal Seams

The Construction and Application of a Digital Coal Seam for Shearer Autonomous Navigation Cutting

Non-repeated advance support technology: a fully mechanized caving face in extra thick coal seam of North China

Experimental Study on the Efficacy of Water Infusion for Underground Mining of a Coal Seam

Influence of underground mining activities on the topographic surface, case study of Nui Beo Coal Mine (Vietnam)