Abstract:Ni-rich cathode (Ni > 0.8) provides a low-cost and high-energy-density solution to the next-generation lithium-ion batteries. Unfortunately, severe capacity fading of Ni-rich cathode caused by the interfacial and bulk structural degradation impeded its application. Herein, Zr doping and Li6Zr2O7 coating are applied to a Ni-rich LiNi0.83Co0.12Mn0.05O2 (NCM) layered cathode material, and the modified material exhibits excellent cycle stability. The 1%Zr-NCM cathode material maintains a discharge capacity of 173.9 mAh g–1 at 1 C after 200 cycles in the 2.5–4.3 V voltage range at 25 °C, corresponding to a capacity retention of 94.6%; however, the unmodified NCM only delivers 129.9 mAh g–1 (capacity retention 68.6%). The synergistic effect of bulk Zr doping and surface Li6Zr2O7 coating improves the cycle stability of the Ni-rich material. Zr doped into the bulk could form a strong Zr–O bond to stabilize the layered structure, and Zr located in the Li layer can act as a pillar to maintain the layered structure and reduce Li+/Ni2+ mixing. In addition, the Li6Zr2O7 coating layer can also play a dual role in promoting Li+ migration and suppressing surface side reactions. This work demonstrates that sufficiently utilizing zirconium to enhance the electrochemical performance of cathode materials is a feasible and promising strategy.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01851?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01851</a>.Rietveld refinement results; SEM images and EDS mapping of precursor and Zr-modified precursor; linear sweep EDS of 1%Zr-NCM; EDS mapping of 0.5%Zr-NCM and 1%Zr-NCM; XPS spectra; rate capability; and XRD results after cycling test (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01851/suppl_file/ae0c01851_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A robust ZrO 2 rectifier layer derived from UiO-66 enable ultra-high nickel cathodes with high stability and ion transport kinetics for lithium-ion batteries

Enhancing the structural stability of Ni-rich layered oxide cathodes with a preformed Zr-concentrated defective nanolayer.

Ultrahigh‐Ni Cathode with Superior Structure Stability Enabled by a Covalent Bonding Strategy

Utilizing Diverse Functions of Zirconium to Enhance the Electrochemical Performance of Ni-Rich Layered Cathode Materials

Chemical Modification of Nickel-Rich Layered Cathode Materials to Improve Battery Life

Dual functions of zirconium metaphosphate modified high-nickel layered oxide cathode material with enhanced electrochemical performance

Boosting cell performance of LiNi0.8Co0.1Mn0.1O2 cathode material via structure design

Enhanced Electrochemical Performance of LiNi 0.5 Co 0.2 Mn 0.3 O 2 Cathode Material by Ultrathin ZrO 2 Coating

Integrated Surface Modulation of Ultrahigh Ni Cathode Materials for Improved Battery Performance

Black Zirconia Cathode Coating Layer Enabling Facile Charge Diffusion and Surface Lattice Stabilization for Lithium-Ion Batteries

Amorphous Li2ZrO3 nanoparticles coating Li[Li0·17Mn0·58Ni0.25]O2 cathode material for enhanced rate and cyclic performance in lithium ion storage

Enhanced structurally stable cathodes by surface and grain boundary tailoring of Ni-Rich material with molybdenum trioxide

Atomical Reconstruction and Cationic Reordering for Nickel‐Rich Layered Cathodes

Towards Rational Design of High Performance Ni-rich Layered Oxide Cathodes: the Interplay of Borate-Doping and Excess Lithium

Enabling Structure/Interface Regulation for High Performance Ni‐Rich Cathodes

Simple Synchronous Dual-Modification Strategy with Zr 4+ Doping and CeO 2 Nanowelding to Stabilize Layered Ni-Rich Cathode Materials

Enhanced Electrochemical Performances of Ni-rich Cathode Materials for Lithium Ion Batteries by Mixed Coating Layers

An integrated surface coating strategy to enhance the electrochemical performance of nickel-rich layered cathodes

Enhanced high-voltage robustness of ultra-high nickel cathodes by constructing lithium-ion conductor buffer layer for highly stable lithium-ion batteries

Nanoscale operation of Ni-Rich cathode surface by polycrystalline solid electrolytes Li3.2Zr0.4Si0.6O3.6 coating

Ni-Rich Layered Oxide with Preferred Orientation (110) Plane as a Stable Cathode Material for High-Energy Lithium-Ion Batteries