Abstract:Developing wind tunnel models is time consuming, labor intensive, and expensive. Rapid prototyping for wind tunnel tests is an effective, faster, and cheaper method to obtain aerodynamic performance results while considerably reducing acquisition time and cost for the models. Generally, the rapid prototyping models suffer from insufficient stiffness or strength to withstand the loads generated during a wind tunnel test. In the present study, a rapid prototype model reinforced with metallic inserts was produced to experimentally investigate the aerodynamic characteristics of an uncrewed aerial vehicle with various wingtip deflections. The fused deposition modeling process was used to make the outer mold, whereas the metallic parts were produced using laser cutting and the computer numerical control machining process. Then, the model was evaluated both experimentally and numerically. The test campaign presented in this work was conducted in the de Havilland low-speed wind tunnel facility at the University of Glasgow. For better characterization of flow patterns dominated by leading edge vortices, numerical simulations were run using OpenFOAM 8.0 and validated with experimental data. The experimental data obtained from the hybrid rapid-prototyped model agreed well with the numerical results. This demonstrates the efficacy of hybrid rapid-prototyped models in providing reliable results for initial baseline aerodynamic database development within a short period and at a reduced cost for wind tunnel tests.

A spatially optimized wind tunnel

NUMERICAL WIND TUNNEL TECHNIQUE FOR THE WIND RESISTANCE ANALYSIS OF LONG SPAN SPATIAL STRUCTURES

Development of a large recirculating boundary-layer wind tunnel

Fundamentals of Wind-Tunnel Design

Design and fabrication of a wind tunnel for building aerodynamics

Design and Evaluation of a Flow Capturing Device for a High-Speed Wind Tunnel

Acoustic characterization and optimization of a subsonic closed loop wind tunnel

Design and testing of an affordable desktop wind tunnel

The Development and Optimization of a New Wind Tunnel Design for Odour Sampling

Design and Research for the Large-Caliber Low-Speed Straight-Flow Wind Tunnel Test Platform

Experimental and numerical analysis of a new wind tunnel for building and mechanical ventilation components performance assessment

Design and Characterization of a Small Aeroacoustic Wind Tunnel

Generalized, Three-Dimensional Wind Tunnel Wall Correction Using Nonlinear Least-Squares Optimization

Low Observable Uncrewed Aerial Vehicle Wind Tunnel Model Design, Manufacturing, and Aerodynamic Characterization

Wind Tunnel Experiments of Novel Wing Configurations for Design and Customisation in an Industry 4.0 Environment.

Design rules for small low speed wind tunnels

Turbine Vane Endwall Film Cooling with Barchan-Dune Shaped Ramp in a Single-Passage Transonic Wind Tunnel

Versatile wind tunnel and CFD-based optimal design

The Further Research on the Design of Low(varying) Turbulence Wind Tunnel

A new low-turbulence wind tunnel for animal and small vehicle flight experiments

A Computational Fluid Dynamic Study for Temperature Uniformity at a Wind Tunnel Outlet with Effects of Heat Transfer along Tunnel Walls