Abstract:PVDF/Cu‐MOF composite synthesis, characterization and piezoelectric device fabrication. Copper based metal–organic frameworks (Cu‐MOF) incorporated poly(vinylidene fluoride) (PVDF) composites were processed using drop casting, with different concentrations of Cu‐MOF (0.15–2 wt.%). Ultrasonication and centrifugation of Cu‐MOF particles were adopted as pre‐processing steps to ensure effective de‐agglomeration of the Cu‐MOF particles. The formation of polar β‐crystalline phase in PVDF/Cu‐MOF composite was confirmed by the morphological observation of fibrillar microstructure and the manifestation of specific absorption bands via spectroscopic analysis. Further, FTIR and NMR spectroscopic analyses unequivocally established the interfacial interactions between Cu‐MOF particles and PVDF dipoles. A maximum of ~92% polar fraction and ~25 pm/V d33 was obtained in PVDF composite of 1 wt.% of Cu‐MOF. Dielectric and ferroelectric investigations were carried out to relate the improvement of the interfacial polarization. Moreover, energy harvesting devices were fabricated from PVDF/MOF composites and a maximum rectified piezoelectric voltage of ~40 V was recorded during finger tapping experiment in PVDF/MOF composite of 1 wt.% Cu‐MOF. Further, a load current and maximum volumetric power density of 7.5 μA and ~1.2 mW/cm3, respectively, were achieved. The usage of the fabricated device as an energy harvester was further established by charging and discharging different capacitors and illuminating LEDs. Highlights Cu‐MOF (0.15–2 wt.%) incorporated PVDF composites were processed by solution casting. A maximum of ~92% polar fraction was obtained in PVDF/1MOF composite. A maximum rectified output voltage of ~40 V was recorded in PVDF/1MOF composite. A higher power density (1.2 mW/cm3) and load current (7.5 μA) were achieved for PVDF/1MOF. The usage of the fabricated device as an energy harvester was further established.

Piezoelectric properties of noncovalently functionalized 2D nanomaterials incorporated poly(vinylidene fluoride) nanocomposites

Hierarchically Structured Hollow PVDF Nanofibers for Flexible Piezoelectric Sensor

Polymeric Nanofibers with Ultrahigh Piezoelectricity Via Self-Orientation of Nanocrystals

Enhanced Piezoelectric Properties of Poly(Vinylidenefluoride-Co-Trifluoroethylene)/Carbon-Based Nanomaterial Composite Films for Pressure Sensing Applications

Mechanically Stretchable Piezoelectric Polyvinylidene Fluoride (pvdf)/boron Nitride Nanosheets (bnnss) Polymer Nanocomposites

Flexible Polyvinylidene Fluoride Based Nanocomposites with High and Stable Piezoelectric Performance over a Wide Temperature Range Utilizing the Strong Multi-Interface Effect

Positive Piezoresistive Behavior of Electrically Conductive Alkyl-Functionalized Graphene/polydimethylsilicone Nanocomposites

Development of electroactive nanocomposites based on poly(vinylidene fluoride-hexafluoropropylene)/polycarbonate blends with improved dielectric, thermal, and mechanical properties

A comprehensive investigation on metal–organic framework based poly(vinylidene fluoride) composites as piezoelectric nanogenerators

Influence of H-Bonding on the Crystalline Structures, Ferroelectric and Piezoelectric Properties of Novel Nanogenerators of Lithium Salt of 6-Amino Hexanoic Acid Incorporated Poly(vinylidene fluoride) Composites

Improvement of the Piezoresistive Behavior of Poly (vinylidene fluoride)/Carbon Nanotube Composites by the Addition of Inorganic Semiconductor Nanoparticles

Electrospun 1D and 2D Carbon and Polyvinylidene Fluoride (PVDF) Piezoelectric Nanocomposites

Nanosheet‐Doped Polymer Composites with High Intrinsic Piezoelectric Properties for Energy Harvesting

Mechanisms for Enhancing Polarization Orientation and Piezoelectric Parameters of PVDF Nanofibers

Promising ferroelectric and piezoelectric response of Cr-doped ZnO nanofiller-incorporated PVDF flexible and laminated nanocomposite system

Piezoelectric Response in Electrospun Poly(vinylidene fluoride) Fibers Containing Fluoro-Doped Graphene Derivatives

Enhanced ferroelectric and pyroelectric properties of poly(vinylidene fluoride) with addition of graphene oxides

Improved Dielectric Properties of Nanocomposites Based on Poly(vinylidene Fluoride) and Poly(vinyl Alcohol)-Functionalized Graphene

Effect of layered transition metal dichalcogenide hybrid nanomaterials on the piezoelectric performance of non‐solvent induced phase separated polyvinylidene fluoride

Interfacial engineering strategy to improve the piezoresistive performance of polymer nanocomposites via chemical bonding of carbon nanotubes on grapheme

Large Piezoelectric Strain in Sub-10 Nanometer Two-Dimensional Polyvinylidene Fluoride Nanoflakes.