Abstract:This study analyzes the impact of dyeing temperature, dyeing time, pH of the dye bath, and dye concentration on the dyeing efficiency of the nylon 6 fabric. The incorporation of pomegranate peel, walnut husk, pistachio hull, and Terminalia Chebula as bio‐mordants during an environmentally sustainable dyeing process by beetroot extract was found to improve colour fastness. In this paper, the potential of beetroot as a natural source to dye a synthetic fiber that is, nylon 6 fabric, has been examined. We analyzed the impact of the most important dyeing parameters, such as dyeing temperature, dyeing time, pH of the dye bath, and dye concentration, on the dyeing efficiency of the nylon 6 fabric. We achieved the optimal conditions for nylon dyeing by beetroot at the boiling temperature for 60 min using 100% on the fabric weight (owf) dye under acidic conditions. Also, to attain suitable color fastness, we used four different natural mordants (pomegranate peel, walnut husk, pistachio hull, and Terminalia Chebula) before the dyeing process. We also examined the effect of four commonly used metal mordants on the dyeing efficiency. FTIR, SEM, EDX and TGA were then conducted to justify the presence of mordants and dyes on the substrate. We discovered that pre‐mordanting generated colorful fabrics based on the type of mordants used. Also, various natural mordants could produce different color strengths, such that the walnut husk had the highest color strength among the used mordants. The obtained color fastness against washing of all bio‐mordants was rated as excellent and the light fastness of Terminalia Chebula was surprisingly excellent. Bio‐mordants also exhibited equivalent washing fastness to metal mordants, even surpassing them in terms of light fastness. The EDX spectra also showed peaks corresponding to carbon (C), nitrogen (N), and oxygen (O). Finally, the fabric mordanted with pomegranate peel exhibited very less mass loss, thus indicating thermal stability.

Dope-dyed polyurethane electrospun nanofibers

INVESTIGATION OF THE IMPACT OF DIFFERENT PARAMETERS ON THE MORPHOLOGY OF ELECTROSPUN POLYURETHANE NANOFIBERS

Preparation of Novel partially Bio-Based Thermoplastic Polyurethane / Polyacrylonitrile Electrospun Fiber Mats

Surface modification of electrospun PAN nanofibers by amine compounds for adsorption of anionic dyes

Advances in Dyeing Technologies for Polyacrylnitrile

Valorization of polyurethane foam waste through the decoration with nano-polyaniline for dye decontamination from polluted water

Electrospinning process optimization for Nylon 6,6/Epoxy hybrid nanofibers by using Taguchi method

Synthesis of High-Performance Aqueous Fluorescent Nanodispersions for Textile Printing—A Study of Influence of Moles Ratio on Fastness Properties

Bio Dyeing of Nylon 6 Fabrics Using Beetroot and Natural Mordants

Electrospinning Processing of Polymer/Nanocarbon Nanocomposite Nanofibers—Design, Features, and Technical Compliances

Structure and Potential Applications of Polyamide 6/Protein Electro-spun Nano-fibrous Mats in Sorption of Metal Ions and Dyes from Industrial Effluents

Surface Modification and Dyeing of Ultrahigh-Molecular-Weight Polyethylene Fabrics Using Diazirine-Based Polymers

Influence of polymer electrospun nanofibers on thermal properties of epoxy resins

Dope dyeing of tannic acid modified ultra‐high molecular weight polyethylene fabric

Efficient removal of reactive blue-19 dye by co-electrospun nanofibers

Supercritical fluid dyeing of polyester fabrics using polymeric nanofibers loaded with disperse dye

Surface functionalization of polyamide fiber via dopamine polymerization

Modification of polyacrylonitrile nanofibers by blending with polyurethane

Photocatalytic degradation of dyes by novel electrospun nanofibers: A review

Post‐modification of azo dyes using an α‐phenyl diazo ester for improving the colour fixation properties of polyurethane fibre

High-Strength and Conductive Electrospun Nanofiber Yarns