Abstract:Electrochemical water splitting and fuel cells are intriguing ways to achieve a potentially sustainable and clean energy 1 . A greater focus on these energy technologies necessitates the design and development of highly active, cost-effective electrocatalysts that can substitute state of the art noble metal based materials 2 . In this context, metal selenide-based materials are important owing to their superior stability and electrical conductivity 3 . Their high specific surface area and abundant active sites on the surfaces make them strong candidates for use as electrocatalysts. Herein, heterostructured copper selenide and zinc selenide encased in carbon nanofibers (CZSe@C-450) synthesized using electrospinning and selenization techniques are used as bifunctional electrocatalysts. The novel architecture and tunable confinement of bimetallic selenides with the carbon matrix results in improved electrochemical performance in both oxygen evolution (OER) and oxygen reduction reactions (ORR) 4 . CZSe@C-450 exhibits a low overpotential of 260 mV at 10 mA cm −2 for oxygen evolution reaction and exhibits a half-wave potential (E 1/2 ) of 0.88 V for oxygen reduction reaction. Further, the creation of a heterogeneous phase boundary between copper selenide and zinc selenide in the CZSe@C-450 enhances the built-in potential, local atomic disorder, and mismatch in the lattice that leads to lowering the surface energy. This gives rise to creation of catalytically active edge sites and phase boundaries, which contribute to the enhanced performance and good stability in both OER and ORR 5,6 . References: (1) Gielen, D.; Taibi, E.; Miranda, R. Hydrogen: A Renewable Energy Perspective. Abu Dhabi: International Renewable Energy Agency 2019 . (2) Han, L.; Dong, S.; Wang, E. Transition‐metal (Co, Ni, and Fe)‐based Electrocatalysts for the Water Oxidation Reaction. Advanced materials 2016 , 28 (42), 9266–9291. (3) Feng, W.; Pang, W.; Xu, Y.; Guo, A.; Gao, X.; Qiu, X.; Chen, W. Transition Metal Selenides for Electrocatalytic Hydrogen Evolution Reaction. ChemElectroChem 2020 , 7 (1), 31–54. https://doi.org/10.1002/celc.201901623. (4) Velpandian, M.; Ummethala, G.; Malladi, S. K.; Meduri, P. Heterogeneous Interface Induced Electrocatalytic Efficiency Boosting of Bimetallic Cu/Zn Selenides for Stable Water Oxidation and Oxygen Reduction Reactions. Catalysis Science & Technology 2022 . (5) Gbadamasi, S.; Mohiuddin, M.; Krishnamurthi, V.; Verma, R.; Khan, M. W.; Pathak, S.; Kalantar-Zadeh, K.; Mahmood, N. Interface Chemistry of Two-Dimensional Heterostructures – Fundamentals to Applications. Chem. Soc. Rev. 2021 , 50 (7), 4684–4729. https://doi.org/10.1039/D0CS01070G. (6) Zhao, R.; Li, Q.; Jiang, X.; Huang, S.; Fu, G.; Lee, J.-M. Interface Engineering in Transition Metal-Based Heterostructures for Oxygen Electrocatalysis. Mater. Chem. Front. 2021 , 5 (3), 1033–1059. https://doi.org/10.1039/D0QM00729C.

(Digital Presentation) Electrospun Bimetallic Cu/Zn Selenide @ Carbon Nanofiber Electrocatalysts for Oxygen Evolution and Oxygen Reduction

Rational Design of Cobalt-Iron Selenides for Highly Efficient Electrochemical Water Oxidation

Metallic Transition Metal Selenide Holey Nanosheets for Efficient Oxygen Evolution Electrocatalysis.

Ferrum-doped nickel selenide @tri-nickel diselenide heterostructure electrocatalysts with efficient and stable water splitting for hydrogen and oxygen production

Selenide/sulfide heterostructured NiCo<sub>2</sub>Se<sub>4</sub>/NiCoS<sub>4</sub> for oxygen evolution reaction, hydrogen evolution reaction, water splitting and Zn-air batteries

Metal organic framework derived Se blended ZrO2 at a nitrogen-doped carbon heterostructure for electrocatalytic overall water splitting

Carbon Nanotube Composites with Bimetallic Transition Metal Selenides as Efficient Electrocatalysts for Oxygen Evolution Reaction

Self-assembled CoSe<sub>2</sub>-FeSe<sub>2</sub> heteronanoparticles along the carbon nanotube network for boosted oxygen evolution reaction

Selenium-doped mixed metal oxide nanoparticles decorated on g-C3N4 and MXene sheets as promising bifunctional oxygen electrocatalysts for rechargeable Zn–air batteries

In-Situ-Engineered 3D Cu 3 Se 2 @CoSe 2 –NiSe 2 Nanostructures for Highly Efficient Electrocatalytic Water Splitting

Computational screening of transition metal atom doped ZnS and ZnSe nanostructures as promising bifunctional oxygen electrocatalysts

In Situ Phosphoselenization Induced Heterointerface Engineering Endow NiSe2/Ni2P/FeSe2 Hollow Nanocages with Efficient Water Oxidation Electrocatalysis Performance

Interfacial Electronic Structure Modulation of Hierarchical Co(OH)F/CuCo2S4 Nanocatalyst for Enhanced Electrocatalysis and Zn-Air Batteries Performances

Ni3S4/FeNi2S4 Heterostructure-Embedded Metal-Organic Framework-Derived Nanosheets Interconnected by Carbon Nanotubes for Boosting Oxygen Evolution Reaction

Transition Metal Selenides for Oxygen Evolution Reaction

Partial Selenium Surface Modulation of Metal Organic Framework Assisted Cobalt Sulfide Hollow Spheres for High Performance Bifunctional Oxygen Electrocatalysis and Rechargeable Zinc–Air Batteries

Nanoporous Cobalt-Selenide as High-Performance Bifunctional Electrocatalyst towards Oxygen Evolution and Hydrazine Oxidation

Sulfur-Doped Zinc Oxide-Nikel Oxide as Efficient Bifunctional Electrocatalyst for Overall Water Splitting

Heterostructured FeSe 2 -CoSe 2 Nanorods Supported on Nitrogen and Sulfur co-doped Reduced Graphene Oxide as High‐Performance Electrocatalyst for Oxygen Evolution Reaction

Metal–Organic Framework-Derived Bimetallic NiFe Selenide Electrocatalysts with Multiple Phases for Efficient Oxygen Evolution Reaction

Selenic Acid Etching Assisted Vacancy Engineering for Designing Highly Active Electrocatalysts toward the Oxygen Evolution Reaction