In-Situ-Engineered 3D Cu 3 Se 2 @CoSe 2 –NiSe 2 Nanostructures for Highly Efficient Electrocatalytic Water Splitting

Guoxu Wang,Jun Huang,Guangliang Chen,Wei Chen,Changsheng Song,Mengchao Li,Xingquan Wang,Dongliang Chen,Hao Zhu,Xianhui Zhang,Kostya Ken Ostrikov
DOI: https://doi.org/10.1021/acssuschemeng.0c05985
2020-11-09
Abstract:In-situ engineering of nonprecious catalysts with highly electrocatalytic performances for H<sub>2</sub> or O<sub>2</sub> generation is one of unresolved challenges in industrial chemistry. In this work, a trimetallic (Cu, Ni, Co) selenide is fabricated in-situ on the nickel–cobalt foam (NCF) modified by the dielectric barrier discharge (DBD) plasma (PNCF) with a facile hydrothermal method. The resulting transition-metal-based selenide (Cu<sub>3</sub>Se<sub>2</sub>@CoSe<sub>2</sub>–NiSe<sub>2</sub>/PNCF) exhibits excellent catalytic activity for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in 1 M KOH, and the overpotentials stimulated with a current density of 10 (<i>j</i><sub>10</sub>) and 100 (<i>j</i><sub>100</sub>) mA cm<sup>–2</sup> are ∼42 and 178 mV in HER process, as well as 240 and 270 mV in OER. Specifically, the electrocatalytic activity of Cu<sub>3</sub>Se<sub>2</sub>@CoSe<sub>2</sub>–NiSe<sub>2</sub>/PNCF is better than the benchmarked RuO<sub>2</sub> for OER in the high current density region (&gt;<i>j</i><sub>250</sub>). In addition, the amount of H<sub>2</sub> and O<sub>2</sub> gases for Cu<sub>3</sub>Se<sub>2</sub>@CoSe<sub>2</sub>–NiSe<sub>2</sub>/PNCF stimulated with <i>j</i><sub>10</sub> are ∼1.52 and 0.9 mmol h<sup>–1</sup>, respectively, thus exhibiting higher efficiency than numerous nonprecious catalysts containing transition metals.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05985?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05985</a>.Optimized processes for getting highest electrocatalytic electrodes of Cu<sub>3</sub>Se<sub>2</sub>@CoSe<sub>2</sub>–NiSe<sub>2</sub>; physicochemical structures of Cu<sub>3</sub>Se<sub>2</sub>@CoSe<sub>2</sub>–NiSe<sub>2</sub> structures after HER and OER process; comparison of electrocatalytic performances for HER and OER with other reported non-noble electrocatalysts (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05985/suppl_file/sc0c05985_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the challenge of achieving highly efficient electrocatalytic hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in industrial chemistry using non - noble - metal catalysts. Specifically, the authors prepared a trimetallic selenide (Cu₃Se₂@CoSe₂−NiSe₂) on nickel - cobalt foam (NCF) through an in - situ engineering method, aiming to improve the electrocatalytic performance of these non - noble - metal catalysts, especially at high current densities. The goal of the paper is to develop a low - cost, highly efficient and stable catalyst to replace the currently expensive noble - metal catalysts (such as platinum and ruthenium/iridium oxides) for the hydrogen and oxygen production processes of water electrolysis, thereby promoting the development of sustainable energy.