Abstract:In this paper, for an intensity wavelength division multiplexing (IWDM)-based multipoint fiber Bragg grating (FBG) sensor network, an effective strain sensing signal measurement method, called a long short-term memory (LSTM) machine learning algorithm, integrated with data de-noising techniques is proposed. These are considered extremely accurate for the prediction of very complex problems. Four ports of an optical coupler with distinct output power ratios of 70%, 60%, 40%, and 30% have been used in the proposed distributed IWDM-based FBG sensor network to connect a number of FBG sensors for strain sensing. In an IWDM-based FBG sensor network, distinct power ratios of coupler ports can contain distinct powers or intensities. However, unstable output power in the sensor system due to random noise, harsh environments, aging of the equipment, or other environmental factors can introduce fluctuations and noise to the spectra of the FBGs, which makes it hard to distinguish the sensing signals of FBGs from the noise signals. As a result, noise reduction and signal processing methods play a significant role in enhancing the capability of strain sensing. Thus, to reduce the noise, to improve the signal-to-noise ratio, and to accurately measure the sensing signal of FBGs, we proposed a long short-term memory (LSTM) deep learning algorithm integrated with discrete waveform transform (DWT) data smoother (de-noising) techniques. The DWT data de-noising methods are important techniques for analyzing and de-noising the sensor signals, and it further improves the strain sensing signal measurement accuracy of the LSTM model. Thus, after de-noising the sensor data, these data are fed into the LSTM model to measure the sensing signal of each FBG. The experimental results prove that the integration of LSTM with the DWT data de-noising technique achieved better sensing signal measurement accuracy, even in noisy data or environments. Therefore, the proposed IWDM-based FBG sensor network can accurately sense the signal of strain, even in bad or noisy environments; can increase the number of FBG sensors multiplexed in the sensor system; and can enhance the capacity of the sensor system.

Fault diagnosis of the LAMOST fiber positioner based on a long short-term memory (LSTM) deep neural network

LAMOST Fiber Positioning Unit Detection Based on Deep Learning

Fiber Tension Prediction and Control Methods in Automated Fiber Placement

Reflective Fiber Faults Detection and Characterization Using Long-Short-Term Memory

A Fault Detection Method for Transmission Line Components Based on Synthetic Dataset and Improved YOLOv5

Application of no-light fault prediction of PON based on deep learning method

Data-Based Line Trip Fault Prediction in Power Systems Using LSTM Networks and SVM.

Deep Learning for Position Fixing in the Micron Scale by Using Convolutional Neural Networks

Intelligent fault diagnosis of mechanical engineering using NLF-LSTM optimized deep learning model

Automating Optical Network Fault Management with Machine Learning

Light intensity optimization of optical fiber stress sensor based on SSA-LSTM model

A Deep-LSTM-Based Fault Detection Method for Railway Vehicle Suspensions

VMD and self-attention mechanism-based Bi-LSTM model for fault detection of optical fiber composite submarine cables

Using a Machine Learning Algorithm Integrated with Data De-Noising Techniques to Optimize the Multipoint Sensor Network

Deep learning-based fault diagnosis and localization method for fiber optic cables in communication networks

An Investigation of Collisions between Fiber Positioning Units in LAMOST

A Bearing Fault Diagnosis Method Based on a Residual Network and a Gated Recurrent Unit under Time-Varying Working Conditions

Fault Diagnosis of Signal Equipment on the Lanzhou-Xinjiang High-Speed Railway Using Machine Learning for Natural Language Processing

SPLSTM: A Prediction Model for Operational Faults in Rotating Machinery

Application of Deep CNN-LSTM Network to Gear Fault Diagnostics

Interactive spatiotemporal LSTM approach for enhanced industrial fault diagnosis