Abstract:The LAMOST telescope has been operating steadily for more than 10 yr and is currently undergoing an upgrade to its fiber-optic positioning system on the telescope's focal plane. By adding a vision detection system to accurately measure the current position of the optical fibres and carry out closed-loop feedback control, the positioning accuracy of the original optical fiber system is greatly improved. Due to the limitation of the existing optical path of the telescope, to avoid blocking the optical path, the detection system camera cannot be placed on the optical axis of the telescope, which makes the camera and the optical fiber end face at a relatively inclined position. However, the angle between the camera and an object will introduce errors to the polynomial calibration method used in the visual detection system. To address this problem, by analyzing the relationship between the camera imaging principle and the polynomial calibration method, this paper studies the influence of distortion and imaging angle on polynomial calibration results under different angle conditions and proposes an improved high-precision polynomial calibration method. First, the distortion parameters are calculated using Zhang's method, and the image distortion is removed. Then, a mapping model between oblique plane image and nonoblique plane image is established through a homography matrix. The coordinates of all oblique plane feature points are mapped one by one to the nonoblique plane positions on the image space, and a good correction effect is obtained. Finally, the calibration images from different angles are calculated and analyzed through simulation experiments and compared with Zhang's method. The results show that this method has a 10%–40% improvement over Zhang's method.

LAMOST Fiber Positioning Unit Detection Based on Deep Learning

The Research Of Digital Close-Loop Depolarized Fog

Development of Method for Polarization Alignment of PANDA Polarization Maintaining Fiber

Fault diagnosis of the LAMOST fiber positioner based on a long short-term memory (LSTM) deep neural network

Forward Imaging Neural Network with Correction of Positional Misalignment for Fourier Ptychographic Microscopy.

High-Accuracy Angle Detection for the Ultrawide FOV Acquisition Scheme in Free-Space Optical Links

Focal Surface Attitude Detection for LAMOST

Measure fiber position errors from spectra data

An in-process inspection method integrating deep learning and classical algorithm for automated fiber placement

Integrated Sensor-Optics Communication System Using Bidirectional Fiber and FSO Channels and Hybrid Deep Learning Techniques

Improved Location Algorithm for High-spatial-resolution in Fiber Optic Line-based Sensor

An Investigation of Collisions between Fiber Positioning Units in LAMOST

The Calibration of theta-phi Fiber Positioners Based on the Differential Evolution Algorithm

Markov Transition Fields and Deep Learning-Based Event-Classification and Vibration-Frequency Measurement for phi-OTDR

Motion Planning for the Robotic Fiber Positioners of the Large Sky Area Multiobject Fiber Spectrocopy Telescope

Research on Defect Detection in Automated Fiber Placement Processes Based on a Multi-Scale Detector

Research on Calibration Method of off-axis Closed-loop Detection System for Multi-target Spectral Telescope

Research on the Estimation Method of the Point-of-interest (POI) Displacement for Ultra-Precision Flexible Motion System Based on Functional Optical Fiber Sensor

The Optical Performance of LAMOST Telescope

Realization of FTA with High Tracking Accuracy in FSO

Unleashing potentials with deep learning: decoding the complex events for distributed fiber optic sensing applications