Abstract:Shear-dominated hazards, such as induced earthquakes, pose an escalating threat to the sustainability and safety of the geothermal exploitation. Variations in fault orientations and compression–shear stress ratios exert a profound influence on the failure processes underlying these disasters. To better understand these effects on the shear failure mechanisms of hot dry rocks, mode-II fracturing tests on granites were conducted at varying loading angles (specifically, 55°, 60°, 65°, and 70°). These tests were accompanied by a comprehensive analysis of the mechanical properties, energy dissipation behavior, acoustic emission (AE) responses, and digital image correlation (DIC)-extracted displacement fields. The tensile–shear properties of stress-induced microcracks were discerned via AE characteristic parameter analysis and DIC displacement decomposition, and the mode-II fracture energy release rate was quantitatively characterized. The results reveal that with increasing compression–shear loading angles, the mechanical properties of granites are weakened, and the elastic strain energy at peak stress gradually decreases, while the slip-related dissipated energy increases. Throughout the fracturing process, the AE count progressively climbs and reaches a peak near catastrophic failure, with an upsurge in low-frequency and high-amplitude AE events. Microcrack distribution concentrates aggregation along the shear plane, reflecting the emergent displacement discontinuities evident in DIC contours. Both the AE characteristic parameter analysis and DIC displacement decomposition demonstrate that shear-sliding constitutes the paramount mechanism, and the fraction of shear-oriented microcracks and the ratio of tangential versus normal displacement escalate with increases in shear stress. This analysis is supported by the heightened propensity for transgranular microcracking events observed through scanning electron microscopy. As the shear-to-compression stress increases, the energy concentration along the shear band intensifies, with the gradient of the fitting line between cumulative AE energy and slip displacement steepening, indicative of a heightened mode-II energy release rate. These results contribute to a deeper understanding of the mode-II fracture mechanism of rocks, thereby providing a foundational basis for early warnings of shear-dominant geomechanical disasters, and improving the safety and sustainability of subsurface rock engineering.

Frictional Sliding Behaviour of Rough Fracture in Granite Under True Triaxial Loading with Implications for Fault Reactivation

Frictional Strength and Sliding Behaviors of an Analogue Rock-Fault Structure: A Laboratory Study

Cracking Behavior and Acoustic Emission Characteristics of Heterogeneous Granite with Double Pre-Existing Filled Flaws and a Circular Hole under Uniaxial Compression: Insights from Grain-Based Discrete Element Method Modeling

Triaxial experimental study of mechanical behavior of non-persistent jointed granite subjected to slight cyclic dynamic disturbances

Characteristic stress response law and fracture precursor of granite under different dynamic disturbance damage conditions

Failure behaviors of fractured granite during loading and unloading under high confining pressure based on acoustic emission multi-parameter analysis

Experimental Investigation of Pre-Flawed Rocks under Dynamic Loading: Insights from Fracturing Characteristics and Energy Evolution

Experimental research on the mechanical properties and energy transfer of fractured granite under triaxial loading

Uncovering the Fracturing Mechanism of Granite Under Compressive–Shear Loads for Sustainable Hot Dry Rock Geothermal Exploitation

Shear fracture behaviors and acoustic emission characteristics of granite with discontinuous joints under combinations of normal static loads and dynamic disturbances

Prediction and critical transition mechanism for granite fracture: Insights from critical slowing down theory

Slip characteristics of planar and rough granite fractures under unloading normal force

Fractal evolution characteristics of fracture meso-damage in uniaxial compression rock masses using bonded block model

On the Unloading‐Induced Fault Reactivation: The Effect of Stress Path on Failure Criterion and Rupture Dynamics

Experimental Investigation of Mechanical and Fracture Behavior of Parallel Double Flawed Granite Material under Impact with Digital Image Correlation

Experimental Investigation on Frictional Properties of Stressed Basalt Fractures

On the fracture and energy characteristics of granite containing circular cavity under variable frequency-amplitude fatigue loads

Mechanical properties and fracture behavior of flawed granite under dynamic loading

Numerical simulation of true triaxial unilateral unloading effect of fractured rock

Mechanical Response and Failure Characteristics of Granite under Unloading Conditions and Its Engineering Application

Quantifying the Progressive Fracture Damage of Granite Rocks by Stress–Strain, Acoustic Emission, and Active Ultrasonic Methods