Numerical study on combustion characteristics and heat transfer enhancement of the micro combustor embedded with Y-shaped fin for micro thermo-photovoltaic system
Chenghua Zhang,Yunfei Yan,Kaiming Shen,Wei Gao,Ziqiang He,Zongguo Xue,Jianbo Li
DOI: https://doi.org/10.1016/j.applthermaleng.2022.118427
IF: 6.4
2022-07-01
Applied Thermal Engineering
Abstract:Aimed at improving the combustion and thermal performance of micro combustor to increase energy output, a Y-shaped fin is designed to enhance the heat transfer. Firstly, the combustion and thermal performance of conventional micro combustor (MC), micro combustor embedded with straight fin (MCESF) and micro combustor embedded with Y-shaped fin (MCEYF) are compared. The results show that the embedding of Y-shaped fin improves the combustion and thermal performance obviously, especially MCEYF has the best comprehensive performance, meanwhile the mean outer wall temperature and the combustion efficiency are up to 1213.3K and 99.14% at 5m/s, which are significantly higher than MC and MCESF. Besides, a larger Y-shaped fin length is beneficial to fully enhance the heat transfer, but it directly destroys the temperature uniformity and consumes huge power due to the huge inlet pressure. Although the fin length of 12mm brings an exergy up to 19.11W, but the outer wall maximum temperature difference and inlet pressure have reached 181.38K and 246.38Pa, and Y-shaped fin with length of 8mm maintains best comprehensive performance at 5m/s. In addition, increasing the inlet velocity is conducive to improving the energy conversion, resulting in greater radiation energy and exergy, but it reduces the radiation efficiency and the exergy efficiency, meanwhile bring a huge pressure drop. Exergy increases from 13.68W to 18.39W with an inlet velocity from 3m/s to 8m/s, but the corresponding exergy efficiency decreases from 50.42% to 25.42%, and the low efficiency causes a large amount of energy to be lost as exhaust gas. Based on the analysis of the combustor material, high thermal conductivity material is beneficial to MTPV system energy conversion, and the combined use of multiple materials is worth considering. This study obtained the combustion and thermal characteristics under the action of Y-shaped fin, providing reference value for the energy conversion improvement of the micro thermo-photovoltaic system.
energy & fuels,engineering, mechanical,thermodynamics,mechanics