Abstract:Structural Health Monitoring, Ahead of Print. This work assesses experimentally three selected methods for estimating the time of arrival (TOA) of guided waves generated by impacts on a carbon fiber reinforced polymer plate-like structure. This is reached by the individual evaluation of the continuous wavelet transform (CWT), the modified energy ratio (MER), and the Akaike information criterion (AIC). Considering the anisotropic nature of the laminated structure, the propagation of guided waves within such thin-walled structure presents intricate challenges. The utilization of surface-bonded piezoceramic patch sensors aids to detect and measure wave propagation across the plate. The experiments involved impacting the plate at various positions using an impulse hammer and an impact gun, generating a comprehensive dataset encompassing signals captured by sensors placed at different locations. Our investigations have revealed that, with specific modifications, these methods offer effective means of estimating the TOA. In the CWT framework, the introduced frequency domain threshold crossing technique enhances precision in the TOA estimation. To address the slight delays in TOA estimations using the MER method, we refined the method by identifying the first local maximum that exceeds a predefined threshold. This enhancement significantly improves the method's ability to estimate the TOA of sensor signals. Among the explored methods, the AIC stands out for its precise detection of initial impact-induced signal alterations. This method consists of two sequential steps, with the second step notably influencing its outcome. By incorporating local minima from the method-specific function, instead of relying solely on the global minimum, a significant improvement in estimation accuracy was observed in several cases. Nevertheless, our modification led to notably inaccurate estimates in certain cases, indicating instances where the estimates were significantly too early. These findings offer valuable insights into successful TOA estimation, facilitating potential applications such as impact localization and guiding further research in this domain.

Hardware Software Co-Design for Impact Localization using Hybrid Laminates

Design of Structured Light Depth Detection System Based on FPGA

Hardware–Software Partitioning for Real-Time Object Detection Using Dynamic Parameter Optimization

FPGA Implementation of Feature Detection Algorithm Based on High Level Synthesis

Hardware acceleration of infrared small target detection based on FPGA

Algorithm-hardware Co-design for Deformable Convolution

An Impact Localization Solution Using Embedded Intelligence-Methodology and Experimental Verification via a Resource-Constrained IoT Device

Customizable FPGA-Based Hardware Accelerator for Standard Convolution Processes Empowered with Quantization Applied to LiDAR Data

FPGA-based ultrasonic signal processing platform

Embedded FPGA Developments in 130nm and 28nm CMOS for Machine Learning in Particle Detector Readout

Laser ultrasonic time-domain synthetic aperture focusing (SAFT) co-overlay software and hardware (COSH) computing system based on ZYNQ

Impact Detection Based On in-Situ Direct Writing Piezoelectric Polymer Sensor Array

FPGA Design and Implementation of Kinect-Like Depth Sensing

Flexible, monolithic piezoelectric sensors for large-area structural impact monitoring via MUSIC-assisted machine learning

Parallel and Pipelining design of SLAM Feature Detection Algorithm in Hardware

Integrated Design of Lidar Detection and Acquisition System Based on FPGA

Finite Element Simulation and Piezoelectric Sensor Array-Driven Two-Stage Impact Location on Composite Structures

Frequency Wavenumber Design of Piezoelectric Sensors for Impact Monitoring

Embedded FPGA developments in 130 nm and 28 nm CMOS for machine learning in particle detector readout

IMPACT DAMAGE DETECTION IN COMPOSITE LAMINATE PLATES USING AN INTEGRATED PIEZOELECTRIC SENSOR AND ACTUATOR COUPLE COMBINED WITH WAVELET-BASED FEATURES EXTRACTION APPROACH

Detection and time-of-arrival estimation of impact-induced waves in composite laminates