Abstract:In this project, we designed a DC motor whose speed can be controlled by a PID controller. The proportional, integral and derivative gains (KP, KI, KD) of the PID controller are adjusted according to Fuzzy logic. First of all, the fuzzy logic controller is designed according to rules so that the systems is basically robust. There are 25 rules for the auto-tuning of each parameter of the PID controller. The FLC (fuzzy logic controller) has two inputs. The first is the motor speed error between the reference (setpoint) and the actual speed. The second is the variation of the speed error (derivative of the speed error). Secondly the output of the FLC is the parameters of the PID controller which are used to control the speed of the DC motor. The study shows that both the precise characters of PID controllers and the flexible characters of fuzzy controllers are present in the fuzzy self-tuning PID controller. The fuzzy auto-tuning approach implemented on a conventional PID structure was able to control the speed of the DC motor. It also improved the dynamic and static response of the system. The comparison between the conventional response and the fuzzy self-tuning response was performed based on the simulation result obtained by MATLAB/SIMULINK. The simulation results show that the designed self-adaptive PID controller achieves good dynamic behavior of the DC motor, perfect speed tracking with short rise and settling times, zero overshoot and steady state error and thus gives better performance compared to the conventional PID controller. We then model the fuzzy PID using simple code on Arduino IDE and perform a practical experiment, to confirm our theorical results.

Low-cost platform for real time data acquisition and fractional control with application to a DC motor

Low Cost Control Method for Brushless DC Motors Based on Fuzzy Logic Controller

Fully real-time configurable analogue implementation of continuous-time transfer function: Application on fractional controller

Fuzzy Logic Control of Asynchronous Machine Drives With a Fractional Calculus Technique

Matlab Based Approaches to the Real-Time Control of Complex Nonlinear Systems

Low-Cost Embedded Controller for Complex Control Systems

A REAL-TIME DATA-DRIVEN CONTROL SYSTEM FOR MULTI-MOTOR-DRIVEN MECHANISMS

FCS-MPC of Power Converters: an Event-Driven Brain Emotional Learning Approach

A Framework for Real Time Hardware in the loop Simulation for Control Design

On The Asymptotic Stability Of A New Fractional-Order Sliding Mode Control With Application To Robotic Systems

Design And Implement Of A Low Cost Control System Of Active Magnetic Bearings Using Labview Interface For Arduino

Design and Realization of Stand-Alone Digital Fractional Order PID Controller for Buck Converter Fed DC Motor

Speed Control of DC Motor Using Fuzzy PID Controller

Low‐cost hardware‐in‐the‐loop for real‐time simulation of electric machines and electric drive

Fuzzy Fractional Order Sliding Mode Control For Optimal Energy Consumption-Transient Response Trade-Off In Robotic Systems

Digital Realization and Characteristics of Fractional Order Controllers

Design of DC motor controller based on MBD

Artificial Intelligence-Based Real-Time Control of Induction Motor Using dSPACE Controller

Design and Implementation of the Full Fractional Order Vector Control System for Asynchronous Motors

A novel fault tolerant control approach based on backstepping controller for a five phase induction motor drive: Experimental investigation

Development of Fuzzy Controller Using 8-Bit Microcontroller for Switch Mode DC Servo Motor Control