Abstract:In recent years, light management based on localized surface plasmon resonance (LSPR) effects in perovskite solar cells (PSCs) has received significant attention. However, the use of surface plasmon polariton (SPP) excitations in PSCs has been less studied. Meanwhile, hole transport layer-free perovskite solar cells (HTL-free PSCs) have garnered interest due to their lower cost. In this study, we improve light absorption in HTL-free PSCs by simultaneously utilizing LSPR and SPP effects. Au nanotriangles are employed on the surface of the back electrode to excite SPPs. The thickness of the perovskite layer is varied from 100 nm to 400 nm. The optimal periodicity and dimensions of the triangular nanoparticles are determined for each perovskite layer thickness. In the optimal structures with perovskite layer thicknesses of 100 nm, 200 nm, 300 nm, and 400 nm, absorption enhancements of 25%, 12.4%, 13%, and 4.3% are achieved, respectively. The interaction of light with SPP and LSP modes leads to improved solar cell performance. Furthermore, the short circuit current density (JSC) in structures with layer thicknesses of 100 nm and 200 nm increased from 16.7 mA/cm2 to 20.71 mA/cm2 and from 19.8 mA/cm2 to 21.86 mA/cm2, respectively. Other photovoltaic characteristics of the solar cell were obtained through optical-electrical numerical analysis. For the improved solar cell with a perovskite thickness of 100 nm, the values of open circuit voltage, efficiency, and fill factor were 0.847 V, 0.81, and 14.24%, respectively, representing increases of 1.1%, 2.4%, and 28.7% compared to the bare device. Additionally, in the solar cell with a thickness of 200 nm, an efficiency of 17.03% was achieved, showing a 12.5% improvement compared to the bare structure. Our research results facilitate the design of high-performance, ultra-thin, semi-transparent solar cells.

Broadband absorption enhancement in hole-transport-layer-free perovskite solar cell by grating structure

Efficient Inverted Polymer Solar Cells with Directly Patterned Active Layer and Silver Back Grating

Light Management in Hole Transport Layer-Free Perovskite Solar Cell By SPP and LSPR

Performance improvement of HTL-free perovskite solar cells with the graded approach by numerical simulation

Nanotextured highly efficient optical and light trapping strategies using efficient hole transport-free structure for perovskite solar cells

Targeted passivation and optimized interfacial carrier dynamics improving the efficiency and stability of hole transport layer-free narrow-bandgap perovskite solar cells

Solar Cells: Diffraction‐Grated Perovskite Induced Highly Efficient Solar Cells Through Nanophotonic Light Trapping (adv. Energy Mater. 12/2018)

Optical, thermal, and electrical analysis of perovskite solar cell with grated CdS and embedded plasmonic Au nanoparticles

Ultrathin efficient perovskite solar cells employing a periodic structure of a composite hole conductor for elevated plasmonic light harvesting and hole collection

Optimization of Hollow Materials-Based Electron Transport Layer for Enhanced Performance of Perovskite Solar Cell

Charge extraction via graded doping of hole transport layers gives highly luminescent and stable metal halide perovskite devices

Hole Transport Layer‐Free Low‐Bandgap Perovskite Solar Cells for Efficient All‐Perovskite Tandems

Greatly enhanced power conversion efficiency of hole-transport-layer-free perovskite solar cell via coherent interfaces of perovskite and carbon layers

Hole-Transporting Low-Dimensional Perovskite for Enhancing Photovoltaic Performance

Highly Efficient Hole Transport Layer‐Free Low Bandgap Mixed Pb–Sn Perovskite Solar Cells Enabled by a Binary Additive System

A Study of Optical Properties Enhancement in Low-Bandgap Polymer Solar Cells with Embedded Pedot:Pss Gratings

Highly-efficient and low-temperature perovskite solar cells by employing a Bi-hole transport layer consisting of vanadium oxide and copper phthalocyanine.

Progress of Hole‐Transport Layers in Mixed Sn‐Pb Perovskite Solar Cells

Construction of Efficient Cs2AgBiBr6 Perovskite Solar Cells by Enhancing Hole‐Selective Contact with Deep‐Level Dopant‐Free Hole Transport Material

Tailored Polymeric Hole‐Transporting Materials Inducing High‐Quality Crystallization of Perovskite for Efficient Inverted Photovoltaic Devices