Abstract:3D-printed carbon fiber composites hold significant potential in aerospace applications because of their lightweight, high strength and complex structure fabrication capabilities. However, additive manufacturing characteristics such as high porosity, anisotropy and continuous fiber content significantly affect the mechanical properties of printed parts. The aim of this study is to investigate the influence of hybrid printing of short and continuous carbon fibers on the mechanical properties and failure mechanisms of composites and to develop a model to predict elastic properties considering porosity. First, mechanical testing and characterization of short and continuous fiber reinforced polyamide (nylon) print filaments are performed. The results indicate that the elastic modulus and ultimate strength of continuous carbon fiber filaments reach 60 GPa and 1500 MPa, respectively, while the strength and elastic modulus of short carbon fiber filaments reach 60 MPa and 1 GPa, respectively. Then tensile specimens with different continuous fiber orientations and different continuous fiber placement sequences are printed and tested using a multi-material 3D printing technique. The specimens are characterized before and after testing using scanning electron microscopy and microscopy to assess the porosity and failure mechanisms of specimens with different configurations. The results show that the mechanical properties of the printed parts are much lower than those of the print filaments, which proves the serious negative impact of the material extrusion process on the mechanical properties of the printed structural parts. Finally, an analytical method for predicting the elastic behavior of printed composites is developed by introducing the porosity factor in the volume-averaged stiffness model. For continuous and short fiber filled composites with different fiber contents and printing orientations, the predicted results are in agreement with the experiments, and the prediction error is greatly reduced from 30% to less than 5%.

Optimization of Scheme Selection for 3D Printing of Functional Objects from Composite Materials

Progressive concurrent topological optimization with variable fiber orientation and content for 3D printed continuous fiber reinforced polymer composites

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Multi-objective optimization for improving printing efficiency and mechanical properties of 3D-printed continuous plant fibre composites

Experimental and statistical analysis of robotic 3D printing process parameters for continuous fiber reinforced composites

Optimization of 3D Printing Parameters of High Viscosity PEEK/30GF Composites

Preparation and Process Parameter Optimization of Continuous Carbon Fiber-Reinforced Polycarbonate Prepreg Filament

Design optimization in 3D printing

Taguchi Optimization of Parameters for Feedstock Fabrication and FDM Manufacturing of Wear-Resistant UHMWPE-Based Composites

Design and 3D Printing of Continuous Fiber Reinforced Heterogeneous Composites

Selection and Optimization of Carbon-Reinforced Polyether Ether Ketone Process Parameters in 3D Printing—A Rotating Component Application

3D Printing of Continuous Fiber Reinforced Polymer Composites: Development, Application, and Prospective

Processing, mechanical characterization, and micrography of 3D-printed short carbon fiber reinforced polycarbonate polymer matrix composite material

More Stiffness with Less Fiber: End-to-End Fiber Path Optimization for 3D-Printed Composites

3D Printing Carbon-Carbon Composites With Multilayered Architecture for Enhanced Multifunctional Properties

Optimization of the Print Quality by Controlling the Process Parameters on 3D Printing Machine

Topology design of 3D printing continuous fiber reinforced structure considering strength and non‐equidistant fiber

Optimization design and 3D printing of curvilinear fiber reinforced variable stiffness composites based on polar coordinate sweeping

Single and Multi-objective Optimization of Processing Parameters for Fused Deposition Modeling in 3D Printing Technology

Optimization of Fused Deposition Modeling Process Parameters and Dynamic Mechanical Analysis of 3D Printed Polycarbonate/Acrylonitrile-Butadiene-Styrene Composite Loaded with Tetrabromobiphenol-A and Microcrystalline Cellulose

Multiscale concurrent design and 3D printing of continuous fiber reinforced thermoplastic composites with optimized fiber trajectory and topological structure